Find experienced local carpenters in Clifton Hill

Build 2 x bench style seating as per designs. Made of wood and feature upholstery tan vinyl cushions. They are for a commercial space so option to build on site is available if that’s easier. - Due date: Before Sunday, 19 March 2023

A simple wood frame with 2 drawers needs to be readjusted. Instead of bed pulling out from the back to front, I’d like it to pull out left to right. It just needs to be reconfigured. Most raw materials should already be there. Just looking for idea on cost. First two photos with drawers is how it is currently. The other photo is how I’d like it to be configured. - Due date: Flexible

Looking for a custom built timber bike shed (similar to pictured). Dimensions are approximately 205cm L x 150cm H and 80cm D. Need to be waterproof and easy to use. - Due date: Flexible

The guy who built this guitar, put a little wooden wedge under the neck to adjust the action, but it’s still a bit too high for my taste. - Due date: Needs to be done on Friday, 6 January 2023

4 stubborn stains remain after cleaning my apartment to move out. 2 on the wooden floorboards 1 on the white wall 1 is on the wooden bench, which is a water/mould stain that may have damaged the varnish on the wood Need to get them cleaned as soon as possible. - Due date: Flexible

We would like to build a custom toddler table that fits into the curve of a staircase. Price is for labour, and we will cover materials. - Due date: Flexible

URGENT! Need wooden cupboard and shelving - as pictured - demolished and removed, please. Located on outdoor deck, with easy access via laneway. Must be complete by 6pm on Wednesday 5 October. - Due date: Needs to be done on Wednesday, 5 October 2022

Shorten these desk legs 3cm please. The desk is oak, and the legs are solid wood. They are currently not attached to the desk so it’s two “arched” pieces to work with. I’d prefer pick up and drop off in Clifton hill, and am flexible around timings so perhaps you can fit it in between your other comings and goings, especially as I know it’s a small job. - Due date: Flexible

Looking for someone to paint the following photographed pieces: In Cabothane water based polyurethane: 1x 140cm ply shelf 3x 20cm ply shelves 3x wood ply brackets 1x 90cm compartmental oak desk with legs In yellow: 3x 13cm J wall hooks All pieces have been professionally sanded and are ready to paint, we just aren’t set up to do this stuff at home so want some help. Can drop off if you’re within about 5kms of Clifton hill, otherwise pick up preferred- I’m very flexible with timing and dates on drip off/pick up if you want to work it into a commute somewhere. I understand clear poly may take a little more practice than regular paint (and have bought this brand based on recommendation of quality and ease of use) so would like someone with experience applying it please. All paints will be supplied. Many thanks, Shelley - Due date: Flexible

Looking for some help installing floating shelves in a small nook in our home. Most likely will need customs sizing (width is 70cm). White board is fine for the job. - Due date: Flexible

Carpet stain needing to be removed. Stain is approx 30cm squared. - Due date: Before Sunday, 31 July 2022

small courtyard and outdoor furniture needs light sand and stain - Due date: Flexible

Add shelves to my wardrobe - including getting wood. There will 5 small shelves that need to be installed. Would be great if you could get the wood and install

Hello! We are looking to get our decking fully sanded and stained. We have the stain already but no other equipment. Flexible on date just want to lock someone in and make sure its done when the weather is fairly decent and time to set. Thanks, Jo

Our bin slides in and out as part of our kitchen joinery. The rollers have become detached and the bin is now misaligned. Thanks very much.

Build a L shape frame and hang plaster 3.5 x 1 m by 3.5 2 m Materials on site On going work

Need someone to please construct my bike shed. The brand is Easy Shed. Dimensions are 2.25m wide x 0.78m deep x 1.34 m high. You'll need to BYO power drill with philips head. It's being installed on loose gravel. Link below has more details https://www.easyshed.com.au/garden-bike-shed-2-25m-w-x-0-78m-d-x-1-34m-h-in-colour

Need someone to please construct my bike shed. So far, I've constructed one wall and just don't have the time / hands to finish. The brand is Easy Shed. Dimensions are 2.25m wide x 0.78m deep x 1.34 m high. You'll need to BYO power drill with philips head. Link below has more details https://www.easyshed.com.au/garden-bike-shed-2-25m-w-x-0-78m-d-x-1-34m-h-in-colour

I have two benches to assemble from the following components: -Ikea Ekbacken kitchen benchtops - ikea Krille screw in legs - steel tubes (20mm) for stabilisation under benchtops to prevent sagging. The ikea tops are solid (22kg each at full length so will need something with power to cut) and need to be cut shorter (from 1.8 to 1.4m), the steel tubes cut to fit these (am thinking each desk to have two lengths of tube screwed under it to prevent sagging), and the legs attached. Additionally, I purchased a plywood shelf second hand a few months ago and it’s sagging, so I’m hoping you can tell me what angle iron to buy at bunnnigs to cut and attach to stabilise this please. Job is in Clifton Hill Victoria. We have an uncovered backyard space if you need to use it to work. Flexible on timing weekdays/weekends as I’d rather have the job done well than done in a hurry. I’ll confirm the steel tubes and angle iron details with you (like what I’m asking for is suitable/what alternative you’d recommend if it’s not) and get them delivered before our arranged date and time. Photos are of all components except angle iron to be put under shelves as I want you to tell me what’s most suitable for me or purchase please.

I need someone who can fit infra-red panels in a BIR to make a home sauna