Find professional window and door services in Pyrmont

Require sliding door to be installed for a small bathroom. I have a painted and ready hollow door and a wall mount runner/pelmet. Door will be similar to a barn door in that there is no cavity. I dont think the job will be complicated for someone handy, but i'd like it done well. I've checked the runner fits above narrow gap above the frame and other logical items. Door frame - The current door frame is old school metal. - Open to suggestions, but a good solution seems to be to fill in the door jamb so it's flush, then add a 5mm x 40mm trim around the inside wall to frame it (have the door sitting flush against the frame when closed and running 5mm off the wall). I can: - repair any minor damage to plaster or wall paint that occurs in the process. - paint the frame after the door is installed. If the pelmet allows approx 2cm extra space when completly open, I should be able to do this and put a rubber stopper on the runner later. Door Install - Wall mount "forerunner pelmet". The wall is cement/brick. I can supply hammer drill, plugs and screws. - I think a 10mm spacer will be required behind it. - The pelmet will need to be cut shorter, so will require a grinder. I have a hand saw. - The pelmet will need to be installed with the door attached, i can help hold the door if required. I have measurements and sketches of how it should fit. Work required in 2 or so wks.

Hi! I’ve purchased a 2040x720mm internal door from Bunnings (pre-paid, ready for pickup). I need someone to pick it up and deliver it to my place in Pyrmont, then install it in place of the old one. The door only needs the handle hole drilled, using the old door as a template. The existing hinges can be reused — same positions, no adjustments needed. No cutting or planing required — just pickup, drilling, and installation. I’m available any weekday after 5:30pm, or any time on Thursday. Let me know your price and availability — thanks!

Fix or repaint scratched door, offers please

To save space need do change 3 doors do adding door . Door is 2.5cm thick and the current gap inside is only 2.5cm . I can accept internal track or barn door solution but the vent wall part not sure if it’s strong enough . please offer pricing and solution

Timber from Bunnings or similar, cut to size, sand edges, apply varnish to all sides and allow to dry. Remove and replace the five slats once varnish is complete and dry.

***CAR/UTE REQUIRED (Vehicle to fit a door inside for transport) **PRICE - just for labour cost - I'd pay for the door itself/bring receipt. I need someone who has experience/knows how to replace a door (internal door, hollow core I believe), to replace my current bathroom door with a new one. I've got a battered in hole damaged, so believe replacing the entire door the easiest way without seeing noticeable signs of repair. I'd want to keep the existing door handle and towel rack holders (all attached pictures), so would be unscrewing those, drilling/putting those back ideally the same way as before onto the new door, and installing the door. I think current door has 2 hinges. I've had a look and found what I think would be an okay match on Bunnings. I've measured my current door and the measurements are approximately: 2000 mm x 715 mm x 33 mm. There's different sizes for the Bunnings door I thought would be fine, but closest match I can see is the: 2040 mm x 720 mm x 35 mm. Unsure if anything then needs to be cut down, or it may be the same/very similar door they have used here. Link: https://www.bunnings.com.au/hume-doors-timber-720-x-2040-x-35mm-internal-door-primed-mdf-flush-h1_p2012188 I'd need you to drive to the Bunnings, pick up the new door as well, as I don't own a car.

I’m looking to repair a sliding mirror door that broke. The dimensions are approximately 225cm x 80cm. Could you please provide a quote for replacing the mirror and any relevant details, such as timeframes and costs?

Bedroom door handle needs force to open. Shower door does not close properly

Need to attach a plate to a door that has been damaged. See photos for before and after. The plate is with me it just needs to be attached you may need glue but I can supply that really all you have to do is remove the door handle and place it on properly

Need someone experience replacing the broken wheels under glass sliding doors

Hello, I need a fly screen to be installed on one of my windows.

Require handyman to replace fly screens on two sliding doors

Task Title: Seal a Window Joint to Prevent Water Leakage Description: I need a professional or experienced handyman to apply silicone to a window joint in my apartment located in Pyrmont. The goal is to seal the joint properly to prevent water from dripping into the property. Details: Location: Pyrmont, NSW Task: Apply silicone to the affected window joint. Purpose: Prevent water from leaking through the joint. Requirements: Must have experience with silicone sealing. Bring your own high-quality silicone and necessary tools. Ensure a clean and professional finish. Access and Timing: Flexible with timing—let me know your availability to arrange access. Budget: Open to quotes, including labor and materials. Let me know if you have any questions or require more details about the task!

Sliding door to bathroom seems to have slipped off hinge and now has a lot of resistance when opening. Need help to place this back onto the hinge to slide correctly.

VW Tiguan left side doors need repairs. See pictures. - Due date: Flexible

I need an experienced handyman to repair 2 outdoor electric blinds (each approximately 3 meters long) positioned next to each other. The work involves: Replacing 4x strong wires Reanchoring the wires into newly retiled travertine stone tiles Repositioning the fabric onto the rails and securing it in place Repairing the worn-out threading in one of the screws/rings that holds the rail onto the wire Reattaching the bottom rail fabric, which has come off completely The end bracket/plate for one of the rails has been lost. If you can replace it, great—if not, we can use an alternate solution. Materials needed: 4x strong wires Anchors for wires to be drilled into travertine tiles Any other materials required for the job The total quote for this task is $400 for labor and materials. Open to offers. This task is for someone with prior experience in similar repairs. It shouldn’t take long for the right person. If you have the necessary skills and experience, please get in touch with your availability and rate.

Need handyman to fix wonky wardrobe and cupboard doors and put a washer in a leaky kitchen mixer tap.

Just need someone to put my wardrobe door back on its hinges. It is the other way around. There is a mirror on the other side. Literally just need someone to come and lift it onto the hinges.

The door latch came out! Needs to be fixed.

Shower door making noises when opening and closing sometimes, it seemed the door gap is uneven compared top to bottom, and that leads the water coming out of the shower. I'm not sure the hinge can be fixed by re-screwing or need a replacement.