Find an experienced plumber in Frankston

We are looking for an experienced and licensed plumber/gas fitter to replace an existing 135L Rheem internal gas storage hot water system and relocate the new unit outdoors at a residential house. Scope of Work: Supply and install a new outdoor-rated gas hot water system (suitable replacement for existing 135L unit). Relocate the hot water system from the internal laundry to a suitable external location. Modify and reconnect existing gas, cold water and hot water pipework as required. Disconnect, remove and dispose of the existing faulty hot water system. Remove redundant internal flue connections and properly seal any openings. Install all necessary valves, fittings and safety components. Test and commission the new system. Provide required compliance certificates and warranty documentation. Important Information: Existing hot water system has developed a significant leak and has been confirmed beyond repair. Property is a standalone house. Currently no hot water available. Photos of the existing installation are attached. Requirements: Fully licensed and insured plumber/gas fitter. Experience with gas hot water system relocation. All work must comply with applicable Victorian plumbing and gas safety regulations. Please provide a fixed-price quote including the new unit, labour, materials, GST and disposal. Please specify the proposed hot water system brand, model and warranty. Urgent job – please advise your earliest availability. We are looking for a competitive quote and a reliable, long-term solution.

Seeking plumber to help remove old hot water unit, update or cut off any gas (although think it’s done) and then replace tiles on the roof from where the flue will be removed that morning.

Hello, I have a tenant who says her hot water is only lasting 5 minutes. She also mentioned a tap is leaking and there appears to be water seeping under the bathroom tiles from somewhere - needing someone out there ASAP so she can use the shower again. happy to adjust price through air tasker depending on work needed

I’m looking at replacing the existing gravity-fed hot water system at a small 2 bedroom unit with a modern mains-pressure heat pump system. I am requiring a licensed plumber/hot water specialist to inspect the existing system and provide a written, itemised quote for the complete replacement? Please include: * Recommended system (make, model and capacity) - including an explanation why this make, model and capacity. * Removal and disposal of the existing system * All plumbing and electrical work * Any work required to convert from gravity-fed to mains pressure * Installation and commissioning * Any roof-space access or removal costs * Applicable VEU rebates/discounts, shown separately * Total price after rebates * All certificates of compliance At this stage, I’m only looking to establish the likely cost and most suitable replacement option. There is no commitment to proceed with the replacement itself; however, because the property is tenanted, where possible. Availability is tomorrow (21 August) - Friday, (22 August) - or Thursday next week (28 August) - or Friday next week (29 August). All after 11:00am.

Following a recent property inspection, mould and peeling paint have been identified in the main bathroom/toilet area of a small (2BR) residential unit in Frankston. I am seeking a licensed plumber to inspect the bathroom and determine whether there is an underlying plumbing-related moisture source contributing to the issue. The purpose of this job is to identify the cause of the moisture issue before arranging mould treatment and repainting. Scope of work Please: * Inspect the bathroom, including the shower, plumbing fixtures and surrounding areas. * Check for signs of water leaks, failed seals, plumbing defects or other moisture sources. * Advise whether the issue appears to be plumbing-related or more likely due to condensation and/or inadequate ventilation. * Provide recommendations for any repairs that may be required. When submitting an offer, please confirm: * You are currently licensed as a plumber in Victoria. * Your experience with bathroom leak investigations. * Your fixed price for the inspection and diagnosis. Important This job is for inspection and diagnosis only. If the inspection identifies that repairs are required, please provide a separate recommendation and fixed-price quote before proceeding with any additional work. Thank you!

There is a leak in the toilet where the bidet and flush connects. The mixer needs to supplied and replaced.

I need twin rail shower head installed to replace current one

I am writing to report an issue with the shower in my apartment. A tenant made contact regarding the shower in their unit. Specifically, they’ve advised: “the shower head is leaking water down the wall and spilling onto the bathroom floor, even after turning the tap off.” So, I am seeking a licensed plumber to inspect and replace the shower head and tap set (I will pay separately or these items), to resolve the leak. Please also note that there’s another active plumbing job or this property – called “Licensed plumber to inspect bathroom for possible leak” The photos attached were sent by the tenant – and show the current setup.

Need soon as you can, please let me know any time. Thanks

Toilet cistern and waste installation it’s here and ready. Vanity waste install as well, will be here to help move vanity as it sits on the floor

Following a recent property inspection, mould and peeling paint have been identified in the main bathroom/toilet area of a small residential unit in Frankston. I am seeking a licensed plumber to inspect the bathroom and determine whether there is an underlying plumbing-related moisture source contributing to the issue. The purpose of this job is to identify the cause of the moisture issue before arranging mould treatment and repainting. Scope of work Please: * Inspect the bathroom, including the shower, plumbing fixtures and surrounding areas. * Check for signs of water leaks, failed seals, plumbing defects or other moisture sources. * Advise whether the issue appears to be plumbing-related or more likely due to condensation and/or inadequate ventilation. * Provide recommendations for any repairs that may be required. When submitting an offer, please confirm: * You are currently licensed as a plumber in Victoria. * Your experience with bathroom leak investigations. * Your fixed price for the inspection and diagnosis. Important This job is for inspection and diagnosis only. If the inspection identifies that repairs are required, please provide a separate recommendation and fixed-price quote before proceeding with any additional work. Thank you!

Gas water system leaking and not working

Old toilet need to be removed and install the new one, see photos of old one and new one

I have been notified by SE Water that I have a water leak.

I have a rainwater tank in my backyard that I would like a tap installed on. The rainwater tank is filled with water; it is not empty. It has two holes on each side. One hole on one side is already used by the pump shown in the pics. The other side has two holes so I don't care which side is used. I just need a tap installed. Reason-I'll put a garden hose on that tap.

I have a hot water pipe leaking in my backyard. Leak appears to be from outdoor pipe May be joint or pipe crack (not sure) Need inspection and repair Location: Frankston Access is easy in backyard Looking for someone experienced with plumbing. Time: ASAPI have a small leak in my backyard hot water pipe. Small holes / minor leak in pipe Not a major burst Likely needs sealing or small section replacement Easy access in backyard Location: Frankston Time: ASAP

Plumber needed to service gas ducted heating and replace broken bathroom tap

1) need to extend cold water and waste approximately 1 metre from kitchen sink to other side of bench top and have connectors ready to go to install a washing machine 2) need to relocate heater as part of this to far side to wall and have the connectors for washing machine ready to go in the option the heater ie currently in

Plumbing for dishwasher .

I need a plumber to reconnect and install plumbing for two sinks. The sinks and cabinets are already installed; however, the waste pipes and traps are currently disconnected and removed (please see photos). Scope of Work Sink 1 (brown cabinet): 1. Connect hot and cold water supply to the mixer tap 2. Reconnect sink waste to the existing wall outlet Sink 2 (white cabinet): 1. Install complete sink waste assembly (basket waste and trap) 2. Connect sink waste to the existing wall outlet All materials shown in the photos are included. If any additional materials are required, Frankston Bunnings is nearby.