Find a professional mdf contractor in VIC

Cut 2 x MDF planks into 12cm strips. Total strips 14. Material available.

Hi all, This one has been on our minds for a bit - hoping for a professional to do the following; - Purchase MDF Panels - Paint MDF Panels - Cut to size if required - Cut out PowerPoints within MDF - Install MDF Panels on feature wall. - Install MDF panels under island bench. - Mount TV on Feature Wall once MDF installed (75inch) Areas are pictured within this task, for reference. Paint: to match the’Matchamisu’ range, like below. https://www.bunnings.com.au/kaboodle-900mm-matchamisu-heritage-medium-rangehood-doors-2-pack_p0437311 MDF panels for feature wall; 4m W x 2.7m H https://www.bunnings.com.au/easycraft-2700-x-1200-x-9mm-easyvj100-primed-general-purpose-wall-lining-mr-mdf-e0_p0440018 MDF panels for under island bench: 3m W x 85cm H https://www.bunnings.com.au/easycraft-900-x-1200-x-9mm-easyvj100-wall-lining-primed-general-purpose-mr-mdf-e0_p0330843 I will provide the following for you: - All panels (you let me know how many of each are required). - Paint - TV & Tv mount supplied onsite. The tools, glues and nails (glue nails etc), to be supplied by installer.

I need a 3mm thick 2400x1220mm piece of MDF cut into 2400x100mm thick strips using a table saw or similar. The cuts need to be very straight! I can drop off the MDF and pick up if local to Noble Park/Springvale.

Hi all, Please see: https://www.bunnings.com.au/easycraft-2700-x-1200-x-9mm-easyvj100-primed-general-purpose-wall-lining-mr-mdf-e0_p0440018 Looking for someone to install this on my lounge room wall. This process will require: - remove the TV from the current wall mount (75inch tv so it is not light). - install MDF. - cut outs as necessary (allowing for PowerPoints etc). - re-install Tv and wall mount to new desired height. Installer to supply tools needed for the job eg. Glue, liquid nails etc. the installation guide can be found on the webpage above.

We require 3x easycraft 2400 x 1200 x 9mm panels cut to size and fixed to 2 bar frames. See images attached of 1 of the bars. Each bar will have a front panel and 2 sides. Panels to be fastened to 19mm steel tube frame

Need a handyman or carpenter to cut and screw MDF sheets over a glass door for security x 2. Glass door is approximately 1900 x 2000mm MDF sheets provided. Need to be cut to size and installed horizontally. MDF sheets are 3600 x 800mm

Experienced Handyman who can put 2 x 15 mm MDF panels into sides of cupboard and then attach/install the sliders/castors to them as drawers are too narrow to fit at present. Please see photo for reference. Instruction booklet available on steps to install sliders. We will need to work out whether we can use existing materials or more needs to be purchased. I would cover material costs. Happy to chat further to the right person.

*Budget negotiable* The job is to install 3 MDF panels (see link below) to bedroom wall. - Dimensions of wall: 2590 (H) 3230 (W) - Panels are 2700 (H) x 1200 (W) x 9 (D) - There are 2 power points; I'd like for these to be on top of the panels - Cornices can remain fixed - If possible, relocate the skirting in front of the panels (low priority) - No caulking, gap filling (e.g. spakfilla) or painting required MDF Panels: https://www.bunnings.com.au/easycraft-2700-x-1200-x-9mm-expressions-chevron-wall-lining-primed-general-purpose-mr-mdf-e0_p0034890?productName=easycraft-9-x-2700-x-1200mm-expression-chevron-primed-wall-lining-mr-mdf-e0&pid=0034890

I want my mdf board to cut as per my measurements for panelling my walls at home. Bunnings have limitations with the measurements. Can anyone please help me

I will buy Mdf board from bunnings, please help me cut the mdf board as per my measurements.

I want someone to cut 6 mm MDF and fix in this area. Need right now. - 50/hr Thanks

Building wall mount shelves in garage. Will fix wall brackets (attached photos) - will purchase MDF/plywood but will need help cutting them to size

I have 6 6mm MDF wood pieces that are 40cm x 60cm. Need 6 frames (5cm apart from each side) cut. I can drop off the pieces at your place.

Install Bunnings wall lining in Kitchen. Small corner space. See photo attached.

Carpentry - Install approximately 8 pieces of precut skirting in an office suite. Skirting was removed however must now be reinstalled. Existing skirting will need to be prepared (nails snipped / de nailed, glue removed from back, etc. ) prior to regluing and fixing. Work required to be completed by by end of Saturday 31st August. Refer photos.

A simple job of doing straight cuts on mdf. Im building a speaker box like the one below. All will be lined up and mdf will be supplied.

I need to have a mdf board cut into strips. 8 pieces total. Board is 9mm Panel Standard 2400 x 1200mm. Need 2 x 111.5cm, 2 x 13cm, 4 x 135cm. All 10cm wide. I will draw out the measurements on the board.

Cut 150 mm x 2000 mm to make flush on bricks tiles are on top of mdf - Due date: Before Monday, 18 December 2023

I need 2 fine cut's of MDF using a table saw. Kitchen Cabinet.

Need a single piece of MDF CNC cut to match an existing piece with two angled edges Approx 4x39x59cm I have the original piece as pictured - ignore the fabric cover - Due date: Flexible