Find a professional gate installation in Brighton VIC

Right side motor in pic not working properly. Opening gate really slowly. Supply and install new sliding gate motors, needs to be connected directly to mains and solar removed

supply and fit Lockwood 001

Pool gate not automatically clicking shut and the latch of a different gate (side gate) needs replacing.

Repair 1 x timber gate Rehang 1 x internal timber door Fix sliding cavity door that is alittle stuck Details below Timber gate broken refer photos. Remove temp metal brackets and fix repair property Hang timber door. Note that the frame has damage so need to be repaired properly with new hinges (and fixings to go deep into frame, not little screws) Cavity slider needs adjustment - getting stuck when opening

Repair 1 x timber gate Rehang 1 x internal timber door Fix sliding cavity door that is alittle stuck Details below Timber gate broken refer photos. Remove temp metal brackets and fix repair property Hang timber door. Note that the frame has damage so need to be repaired properly with new hinges (and fixings to go deep into frame, not little screws) Cavity slider needs adjustment - getting stuck when opening

quote what needs to be done

3 gates in total - wooden driveway gates with metal frame. Note posts either side of gate will stay so its just painting these. The driveway gates attached to remote control motor and metal arms which will also stay , ie no need to be replaced, but new gates do need ro be reattached / fitted to arms that connect to motor. Gates are wooden with a steel strip support frame which you can see in pictures. Second gate is entry/ walkway down garden path. Again the posts on either side are fine. Gate itself is rotten/ also has a letterbox. 3rd gate is a small gate that separates path from deck. We need gates built installed and painted. And all waste incl old gates disposed of/ femovedrDriveway gates 1405mm x 1520 height (x 2) . Pedestrian gate 1405mm x 1520 height. Small gate 1225mm x 1310 height

We have a front fence and gate that needs painting please. It is 16m in entire length and 1.6m high. It needs to be prepped (sanded back) prior to painting. Many thanks, Fran

We need the lock on our outside gate replaced. That quote is including the new Lockwood lock

I need my glass pool gate adjusted so it closes properly.

Steel/metal side gate, hinges broken, door swings open on one hinge, needs new locking mechanism

Fix Gate that is broken. Peice of timber is loose. Hung internal door. Frame is rotten out so need new hinges and screws

Driveway gate hinge has come off (bottom hinge). Needs to be welded back in place. Hinge is still available to be used again.

Pool gate hinge needs to be tightened and secured with a pin Pool fence posts secured into ground Shower head to change fitting Shower curtain to shorten rod and change

Install baby gate to door way. The sides need to be drilled. Also install small lock to door. See picture.

Need front gatr hinge fixed and also fix side gate

Repairs to a fence Repairs to a lock on the outside gate Repairs to a roller door

A few corrugated panels need to be cut and attached to the outside of an existing frame of a small shed and a 1.6m gutter needs to be reattached

The strike on my pedestrian gate is not releasing the gate - it may need to be re set

Replace corrugated Perspex roof on a crossover between the house & carport with a flat Perspex. Area approx 2mtr x 1.5mtrs