Find experienced local fencing contractors in Yarraville West

Looking for an experienced steel fencing contractor or metal fabricator to remove and replace sections of existing ornamental steel fencing at a property in Melbourne. The existing fence is black steel with vertical bars and decorative spearhead tops. The replacement fencing must closely match the existing fence in appearance, dimensions and finish. Scope of works: * Inspect and measure existing fencing. * Remove damaged/existing fence sections as required. * Remove and dispose of redundant fencing materials. * Supply and fabricate replacement steel fence panels. * Match existing vertical bars, spearhead detailing, rails and posts. * Install replacement fencing with appropriate posts, footings and fixings. * Ensure all fencing is straight, level, secure and properly aligned. * Provide a matching black powder-coated or approved protective finish. * Leave the site clean following completion. Some existing fencing may be retained where practical. Photos attached for reference. Please provide an itemised quote for removal, fabrication, materials, coating and installation. Experience with ornamental steel fencing is preferred.

Complete replacement of one lockable side gate (post is very loose). Repair of a side fence. Repair/rehang of a front gate that is getting stuck against the ground. Repair of 2 x small waist height gates where panels are loose/broken. Please see pictures for details. Seeking like for like repair/replacement of each. Quote to be fully inclusive of time, materials and disposal of the old gate/panels. Thanks.

Looking for an experienced fencer/carpenter to replace the existing front fence and pedestrian gate at my home in Yarraville. Front boundary is approximately 7–8m including the gate. Measurements to be confirmed on site before starting. * Remove and dispose of existing timber/wire fence and gate * Supply and install new traditional timber picket fence * Approx. 900mm high * Matching pedestrian picket gate in existing location * Traditional pointed/spear-style pickets * New timber posts and rails as required * Paint/finish fence in exterior white * Retain and protect existing garden and trees * Retain/integrate existing house number and mailbox where possible * Remove all waste and leave area clean Looking for a simple, traditional picket fence that suits the existing weatherboard home. Please include labour, materials, removal/disposal and painting in your offer. Happy for you to inspect/site measure if required. Photos of existing fence attached. Please send through examples of similar work if available. Budget: $2,000

10.5 Mtr * 2.1 mtr height Supply and install of Backyard fence including removal and disposal of existing.

2 x 3m poles attached to a timber fence and sports netting attached to poles. Poles to be attached 2.65m apart to horizontal timber fence posts. Netting is approx 2.65m wide by 2m high and is to be attached with cable ties to the poles. Have all parts except screws for drilling into fence. There are pre-existing holes in poles however new holes can be drilled to fit net. Likely requires two people (or I can assist) and a ladder please. Top of pole will be 3.2m off the ground. See Haverford website for examples. Any questions please let me know. Price negotiable. Please do not contact me if you are not experienced with this.

2 fence posts that have rotted at the base to be removed and replaced.

I am wanting a pedestrian gate installed. Would like it to be black aluminium style. It’s about 950mm wide gap between the brick wall and the timber fence. Example photos attached of style - open to height whether low about 1m or up to 1.8M tall. Hoping to find out easiest way to do this and quotes. Thanks

Handyman needed - extremely easy task required. Nail 2x existing pickets back on to front fence.

Front gate requires repair / replacement as the latch doesn’t properly close the gate

Looking for someone to add a strip of timber to a colourbond fence to reduce gap between that and the pool fence

Looking for someone to instal a snake proof fence around my house

Fix brick fence , was dragging a tree and knocked it over most bricks still in tact

i) Left hand side - 6.50 metres ii) Rear – 7.8 metres iii) Right hand side – 3.20 metres iv) Material - Colorbond v) Height – 2.1 metres vi) Lattice – 0.2 metres

Temporary fencing as come apart with high winds and needs to be re-solded

Looking for someone to install a 3.5m colourbond fence.

Remove old fence supply and install - 35l/m fencing x 2150mm high + gate approx 950mm wide

We are looking for a dark grey metal gate with vertical slats installed on the side of our house. Gate measurements are approximately 900mm wide x 1900mm tall. Please see images for exact measurements of space between house and fence.

Supply and install new boundary fences at residential property. (Sides and rear only) Remove and dispose of existing fences. Length of property is 23m, width is 10m. So 56m of new fencing required at around 1.9m tall. Only about 25m of existing fence remains to be removed.

I am looking for someone to supply and install 8m of glass pool fencing with gate. 3m of hooding will need to be done

We need 21.5 metres of new Pailing fence and the old one pulled down. This job in in Kingston at Yarraville