Find experienced local fencing contractors in Altona Meadows

15m hampton style flat pack aluminium slat fence and sliding gate assembled and installed, post need to be dug in 600m deep and concreted in as well as cement laid for sliding gate to be installed. There is also a pedestrian gate that will need to be installed. Fence and Pedestrian gate length is 12m and sliding gate is 3.4m. Happy to answer any other questions.

12M slat fence. 6 posts. Includes 3m sliding gate and 1m entry gate. 1.6m in height. Need installed and assembled. Some holes alreay half dug due to the extraction of previous fence. Materials list attached in images also

Needing paling fence panel reattached to upright post + plinth board across the bottom & 5-6 palings replaced. Needing task completed asap. As neighbor has a dog next door. Budget includes the purchase of plinth board & 5-6 palings & bring hammer & nails please

Need a metal pillar to be installed to support the edge of the garage roof due to it shifting and breaking the brick pillar. Just need a temporary fix until we can repair the whole roof properly due to budget restraints.

Require a colour-bond side gate to be installed. Dimensions are approximately 1200mm W by 1600-1800mm H

I would like a fence and gate installed at my property. It is only a total of 3.5m wide. Classic cream would be preferable.

Fixing the post of the fence

need fence built - 3.6mtr posts -14mts long but no fence palings - to be done by a roofer I have already removed old fence but haven't removed the posts. I have only cut them down to 300mm I also require timber frame to be built between the fence and brick wall for the roofer to put on sheets. Fence to wall is 2400mm apart Lastly build pergola frame 3800 x 5800 - roofer to put on the sheets

Need this gate fitted at my workshop. https://www.vergesafetybarriers.com.au/product/new-verge-v-gate-mkii-assembly-left-hand-standard-soft-close-gate-kit-1000h-mm-complete-with-two-gate-posts-hinges-and-fixings/

make a fence, gate for chicken area

require 15 posts to go into ground 600mm deep with 3mtr exposed. include the railings - no palings from posts to brick wall to be framed out for roof sheets approx 2mtrs x 15mts length (roof sheets by someone else)

I’m seeking an experienced fencer to supply and install a freestanding aluminium fence enclosure, with one side fixed to an existing structure, to the specifications below. Fence layout & dimensions Rectangular footprint: 3.0m x 5.5m Fence height: minimum 1200mm One 3.0m side to use an existing bungalow wall as part of the enclosure Fence to be securely fixed / bolted to the wall Installer to confirm appropriate fixings for the wall construction Remaining sides to be freestanding fencing 1.0m wide gate installed on one side of the fence, positioned toward one end (not centred) Gate requirements: Outward opening Self-closing Self-latching Key lockable Latch release height minimum 1500mm Installation Maximum gap under fence: ≤100mm Fence and wall junctions to leave no gaps exceeding 100mm Ground & site conditions - Grass / soil base One side fixed to an existing bungalow wall Fence to be rigid and securely anchored Materials Prefer black or dark aluminium modular fencing Please include in your response Confirmation you can fix fencing to an existing wall

I need an experienced fencing/handyman to repair my existing timber fence at my home in Altona Meadows. It has been loose or broken in both side of the house.

I would need the existing gate to be removed and a new gate to be installed the support on both ends as you can see in the picture is made of bricks in which I will need the gate of both ends to be hinged on the brick wall and when it's closed it is to be perfectly aligned in which there are no gaps in between both parts of the gate Gate dimensions 3m x 1.4m I would also like the existing fence at the front to be removed and new ones installed to match the gate colour and design Fence : approx 7m length I am open to suggestions of what designs you can provide for me I do not want top of the range Gates just decent and cheap

Need a handyman to install two 2.7 treated H 4 posts into the ground. Have posts and cement. Please don’t leave a message on message bank as lm deaf

Have a current carport that is too low and narrow. Wanting to rebuild or alter current carport. Timber build to for caravan.

I need 2 x 3.3m wide, 1.8m high sections of treated pine fence replaced - pailings, crossbeams and two posts. This is as a result of storm damage. Would need works completed by 30 June.

Spa barrier glass gate needs rehanging. Aluminium post is Swiss cheese and may need to be rotated but is glued to deck. Hinges supplied

I need to replace existing timber boundry side fence (in 2 separate sections), section 1: 11450mm, section 2:11250, height 1800mm. Can you please provide a quote for these measurements in colourbond, both sawtooth and trimline profile. Colour: monument. Can you also remove and dispose of existing timber fence? For your information there's concrete pathways on either side. I will need quote as soon as possible, as I need to send it to the realestate of the neighbouring property for approval. The job is located in Altona Meadows, 3028.

12 steel posts (90 x90)to be set in concrete min 600 deep. The only concrete is at existing driveway. Letter box will be removed and anything in the way. The cacti corner garden is set in so.should not be in the way. The steel will be cleaned up and I will get a few more posts too. Ideally the side rails could be welded in position to the posts which can help with the post position prior concreting. Bamboo is a mock up,as we have dog and need it safe. Cheers ..Hope the eally, measurements are clear and more local, more better lol