Find experienced local fencing contractors in Werribee

Colourbond Fence with one wooden Sleeper approx 65 metres of 2 metre high metal C post Set in Concrete (holo to be drilled by other -600mm deep and Hole 300X300. Need to remove and dispose old fence and pickup.

Looking for someone who specialises in fence repairs. One of our fence panels has come loose and become bent, and I need it repaired. Please contact me if you have experience with this type of work.

I need a new chain link fence made and installed asap in Werribee. I need it to be 3400mm x2 total 6800mm with barbed wire top section.

Fix it so they can’t get out

I am looking for a reliable, handy individual or fence contractor to repair a section of leaning wooden fencing in my backyard. The fence is currently tilting toward the neighbor's property and needs to be straightened and secured. Scope of Work: Straighten & Align: Return the leaning section of the fence to a vertical position. Reinforce Posts: Dig out/clear existing post holes(if needed) and pour new concrete to stabilize the main posts. Support Beams: Install wooden support beams/braces on the neighbor’s side to provide long-term stability. General Assessment: Check nearby panels for loose nails or structural weakness and tighten as needed. Requirements: Experience with basic carpentry or fence repair. Must provide your own tools (post-hole digger, level, drill, etc.). Ability to source and transport materials (concrete mix and lumber)—costs for materials will be reimbursed with receipts. Details: Location: Werribee Timing: Flexible (need to agree with neighbor) Payment: $100 for the job + material (neg) If interested, please message me with your experience and your availability for a quick walkthrough or to start the job.

Looking for a bricklayer/landscaper to build a front brick fence, similar (not exactly the same) to the AI-generated design. I’ve attached a photo of my house for reference. Scope includes: * Brick fence at the front * Brick garden beds aligned with each step * Brick mailbox/parcel box Steel fencing is not required. I can supply materials if needed, but happy to get quotes both with and without materials. Also need soil filling once the fence is completed.

Need this 16m fence at the backyard removed and put in a new timber one. This needs to sit on sleepers/retaining wall of 600mm at least. Looking for a quote.

16.2 meters. No posts, just cross beams and pailings. You do the lot and remove all waste. You will obviously need to come and have a look.

Need to have a fence done. Approximately 40 meters, some parts will be on concrete and some on dirt. We have done a boundary re alignment and the fence needs to be moved over closer to the White House. Will need 35m in a straight line as a boundary fence and 5m to join the fence about 15m in to finish a front fence. The land has a gentle slope

Remove 16 metres of timber fencing and install 16 metres of colourbond fencing

Replace timber planks ,sink one or more posts, hourly rate is preferred. Possibly a full days work.

Wooden post to be installed on existing fence I will supply post and concrete

I need someone with experience to supply and install Colorbond fence by removing and disposing old timber fence. The measurement for the new fence is 15.6 meters in length. Height is 180 cm + sleeper on both ends running for 9.4 meters and the middle part height is 210 cm + sleeper running for 6.2 metres to cover the car port on that side. Located in Werribee

I need my old gate removed and a new colourbond one installed in the colour Windspray. It’s a 1m wide gate I would like the old gate taken away as well.

38 lineal metres of pailing fence. 1.5 high. Corner block so great access. No need for removal of existing fence. We will use it as kindling. It’s old hardwood.

Need experienced fencer to provide a written quote for repairing a backyard timber fence (L7.5m, height 1.7m), so I can share with my neighbor. The fence is at Werribee. Thanks

Need an experienced fencer to repair a timber backyard fence (length 7.5m, height 1.7m). The job is in Werribee and I need a written quote so I can share the details with my neighbor.

Looking for a gate to be built here with a lock. Hopefully over the next few days. 1200w x 1800. Wooden or colourbond.

The two trees have now been removed from the back fence (trees no longer there) and I just want that small area screened (onto existing boundary fence - up until house boundary) with a feature fence similar to the other image - ideally in a material that doesn’t require oiling or maintenance. Open to quotes - unsure final material costs 🙏 Ideally height will be around 2-2.2m to block out neighbouring home - and the area to cover is around 2m wide, however, if you need to nail to existing fence post (?) the next post sits at around 3m.

We have a part of fence which is loose and it needs to be secured by adding a new pole.