Find experienced local fencing contractors in Newport VIC

* Relocate the existing galvanised steel garden gate, approximately 1,850 mm high × 950 mm wide. * Reposition the gate approximately 15–20 mm from the hinge side to allow clearance for the metal privacy angles. * Install two 1,000 mm lengths of 40 × 40 mm galvanised equal angle to the existing brick pier. * Position the angles to provide privacy along the latch side while allowing the gate to move freely during seasonal and weather-related movement. * Install the gate lock to the gate and brick pier. * Check and adjust the gate alignment to ensure it opens, closes and locks smoothly. Please note: The galvanised angles and gate lock will be supplied on-site.

I have approximately 3 metres of temporary construction fencing already onsite at my property in Newport. The panels are currently leaning and need to be stood upright, properly joined, braced and secured so they cannot fall into the rear laneway or onto anyone. I would also like black privacy mesh/shade cloth attached to block the view through the fence. Please do not use solid tarpaulin if it will create a wind-loading risk. Please include any required clamps, stakes, braces, sandbags or other basic fixings in your offer, and advise how you propose to secure it. Photos are attached. Bottom tooth photos showed how the fence used to look standing right and how it has now fallen with strong winds. This is a temporary make-safe solution only, not replacement of the permanent boundary fence. Budget: $250-300 open to reasonable offers.

Our gate is broken and now needs to be lifted up to shut properly. All three hinges need to be replaced in new positions and welded on as they are all rusted

Fence has started leaning along the post. Two posts need resetting.

Remove old fence take away, install new timber fence treated pine with hard wood post and rails, post 600mm into ground, plinth board on bottom, 32m length, 1.95m height.

Colourbond fence needs 2 posts concreted

Need back timber fence removed and replaced - approx 7.5 metres

Looking to get shared fence repaired.

We are applying for a permit with the council to get a front fence installed. We have a heritage overlay properly so council approval is required. Our original application was declined and noted that we require: 1. A site plan showing the location of the current boundary fence and the location of any proposed boundary fences, including front fences. 2. A revised 1:50 elevation of the proposed front fence, showing: A) Dimensions, including posts, pickets and spacing between the pickets; and B) The proposed colour and finish. We have quotes from some fence companies we can share to support with this mock up for the council. Please advise if you need more detail.

Had to Build a temporary side fence as emergency for the time being but the position was moved back about 1m Temporary fence will need to be taken down & Would like to move new fence back to the original position If we can salvage any materials used that would be great to cut costs down May need to jack hammer old concrete in original position to place new posts Would like to build a White picket fence or of a heritage look With gold heritage locks Looking for a qualified fencing professional to do the job Green fence is the original fence Brown fence is what is up now but don’t have photos of it completed Would like to get this done in the next few weeks if possible

8m front fence needs replacing Pickets or emu wire Options for sliding gate or manual

Fence Installation and Supply Needed Hi, I’m looking for someone to supply and install a fence: • Fence length: 6m • Electric gate length: 3m I will be removing the old bricked wall myself as my budget is limited. While experience would be preferred, it’s not essential. If you’re interested or have any questions, please reach out. Thank you! Let me know if you’d like any changes!

I have a fence that's leaning and need it straightened as much as possible.

5 Post need reinforcing by installing another 5 alongside.

I need one fence extension screwed into side paling fence for bedroom privacy from neighbour. Available at Bunnings. See photo of the lattice extension required. Need person to both purchase and install the extension on the fence (see photo of fence). The job quote must include purchase of the extension. I have a disability and cannot do any manual handling. Much appreciated. Thank you

I need a small section of fence built ASAP. 1050mm wide and 2.1m high. There is a small section of remain fence that will have to be removed first (approx 40mm wide and 1.8m tall). There is a new post installed and ready to use at one end but the other end will need a post installed.

Fence posts have rotted in the ground and need replacing. 4 posts in total.

Require 2 fences painted: ~6.5m x 1.8m fence plus attached lattice (6.5m x 50cm height) ~ 4.7m x 1.8m fence plus attached lattice (2.35m x 50cm). Paint would need to be sourced.

Fence is about to fall over due to strong winds

Supply and install new pailing fence. 12m long and needing a 2.4m fence. Removal and disposal of existing fence which is approx 12m x 1.8m. Good access in both properties. Quote to include all materials and labour please. Feel free to ask any questions 😀