Find experienced local fencing contractors in Williamstown VIC

Reinstate from fence. We have existing fence and post. Will need to install and any miscellaneous materials such as concrete to be supplied by person undertaking works

I need a timber paling fence installed with new posts approximately 3.0m wide and 2.0m high. I will handle the removal and disposal of the existing fence / gate so it’ll be an open space.

I have 2 uprights that are leaning. They need to be replaced and fence straightened

Install plastic fence panel ( 1800 x400) on top of existing fence. May require slight trim and brackets.

The gate here is stuck and does not open freely. Additionally needs a new lock installed

Repair fence panel that has fallen off in high winds.

A neighbour in back lane drove into our Colorbond sliding gate and damaged one section.

Fence repair to keep it secure in one section (Not an option to replace it at this time) Panel needs to be secured again to side/neighbour fence Missing fence post ( gap) and replace plinth underneath as this was removed May need to reinforce post as it’s a bit wobbly but mainly just want to make it secure again so just minor repairs not looking for perfect again

I have about 4 or 5 of my pocket fence posts that have sunken and need restumping so as to make the fence level. I have already removed all the pickets.

Installing indoor gate at the bottom of the stairs

Replace side paling fence approximately 5 metres in length.

12.5m picket fence with two gates

I need my old fence demolished a removed. I would then like a new fence put up. I would like the style that I have uploaded. Price must be all inclusive. Fence is just under 18 metres.

Repair and reinforce old fence. It requires repair to prevents dogs escaping and falling over

Fence out of alignment and unable to correct. Flexible with budget and to some extent time.

My front gate post is bent on a 15 degree angle and needs straightening up to allow the electric gates to open & close

Need approximately 15m of fencing moved approximately 1m to align with property boundary

Need to remove the existing fence and install a new picket fence. The fence would have a gate in the middle. Currently planning and budgeting to do the work in September

We are looking for a handy person to install a side gate to our house. We are able to offer the gate + materials but may also need some advice. I have included the picture of the measurements below as it is in between to wall of our house (weatherboard) & an adjoining fence.

Remove palings temporarily - Dig out old rotten posts + concrete underneath - 3 Posts to replace - Dispose of waste and rubble - Supply and install new H3 treated pine posts 900x900mm - Re-concrete posts properly - Re-straighten and level fence - NO CUSTOM TOP parts, just regular square top - Re-fix existing palings No painting