Find experienced local fencing contractors in Spotswood

I bought a new house and have a manual steel gate that opens up to the drive way. I would like to use what’s possible to automate the opening and closing.

Remove 6 fence posts from front of property

Fallen timber fence 9.5m. - posts have snapped in the wind and 9.5m of our side fencing has fallen completely down. Looking for someone to put in new posts - at a guess 5 of them. Happy for existing fence to be reattached to new posts, a couple of pailings may need replacing. Or Re-do the whole fence with new pailings.

Wood side fence (4 yo) not connected to side of house, leaning, needs to be straightened either side.

Install temporary fence - highlighted blue - approx. 60m Approximate 6 support stays Required for approx 6 month, 3 months @ minimum Allow for installation and removal Flat site, good access

I need my fence straightened. 2 posts are on an angle. 1 post may need to be replaced

Replace bent post and reattach post . Like for like fencing

Currently there's a fence with gate at side of the house, it's approx 2m wide and 1.8m high. I'd like this fence dismantled and moved forward by 1m. Work involed: Remove pailings from fence Remove horizontal beams Cut fence posts (3) Install new fence posts (3), involes dig post holes and concrete Install horizontal beams (reuse from existing fence) Install pailings (reuse from existing fence)

Replace back fence with colorbond and wood supports like this

Replace current fence with 35 feet color bond fence with wooden sleepers, letter box and name plate and the color of the fence should be exactly Same as the one shown in the picture. Letter box and name plate will be supplied by the owner.

Replace/install side drive gates. Source gates and attachments. 170cm High X 108cm Width Install handle with lock. Posts in excellent condition.

I'm looking for a fencing professional to add fence toppers and convert one panel to a gate Here are the details: Existing Left panel (left side pictured) to be resupplied as a gate (hinge side to the far left (brick side)) Width 1090mm Heigh 1890mm New Height 2290mm(+400mm) Existing Fence (right panels pictured) Width 3800mm + Add Height 400mm Your price needs to include: 1. Converting the left panel to a swinging gate and removing the existing one (and any timber underneath it currently there's a sleeper there) 2. Ensuring the fence and gate heights are the same and consistent 3. The gate is to be hinged and then a hole is to be present for a latch that can be lockable with a padlock internally Happy to answer any questions and looking for this to being completed in the next 2 weeks - Due date: Before Sunday, 25 June 2023