Find trusted local electricians in Altona Meadows

Need to have single power point upgraded to a double power point.

I need 13 No. lights to be replaced to LED downlights by a licensed electrician. I’ll provide the lights.

Electricity provider requires an inspection and certificate of electrical safety (coES) from a licenced provider. 4 bedroom residence - 1960's build. Electricity has been disconnected for over a year

Last time had bike running i switched off by the key, a few days later I installed new plugs and turned key, only too find no power too any part of bike, no dash, lights anything, need onsite auto electrical too come either fix or diagnose, also other small issues.

We’ve been told that we need to get this fixed with either a replacement box to cover the wires shown on the right or whether we need to replace the box completely. Asking for quotes before we accept any offers. Thanks

Remove present light fittings and install new light fittings provided, in 2 rooms.

We’ve been we need to have the black box that covers the electrical powers line to the house replaced for safety reasons. Yea we are aware that there is a charge by powercore, but we’ll pay that separately. Looking for quotes atm just to see our options. Photo attached below

I’m planning to install a built-in dishwasher and need help with: · Power (Electrician required) There’s an existing power cable in the cabinet. I need a licensed electrician to confirm if it’s safe to use (not shared with the oven).If not, a new 10A power point will be needed.

We have a unit with outdated solar panels we want to refurbish the roof so we need it removed

Hi, I’m looking to have an additional power point installed on an internal room wall(ground floor) . It would be located about 3-4 metre away from an existing outlet. Switch will be provided. (Photo attached) Thank you

I need double lights x6 single lights x4 Power points x13, Outside light changed and a sensor changed both are already working just need changed

I’m looking for a licensed and experienced electrician to install 2 feature lights (see attached photo for reference) and 2 standard downlights both in place of existing bulb fittings(B22). I will supply both the feature lights and down lights. The house is a 2 storey and the installation needs to happen on the ground floor. There is no man hole on the ground floor. In future I would like to install more downlights across the house, I am open to recommendations and possibilities. At this point looking to only replace the existing bulb fittings. No new cable or switches need to be installed. This is existing 4 bulbs fitting that needs to be replaced with 2 feature lights and 2 downlights

Samsung heat pump dryer - clothes are still damp at the end of cycle. Getting hot and running for the full cycle but just not dry

Bedroom has unique placing of electricals PowerPoints and eye level lighting. These will be removed as we are painting the room but we need the associated holes plastered over ready to paint

I already have purchased 3 x split systems. One is just replacing the old one. Second one will be put in bedroom (almost back to back) and third one will be in another bedroom back to back. Single story house.

Need to install 2 split units (2.5- 2.6kw)for 2 bedrooms each 12 & 9 sqm in size. Unit will be provided so only for quote for installations.

Need to replace 3down light in kitchen

Quote for electrical work. Single story - labour only: (downlights, switches, fan & GPO will be provided:) - Install downlights (x11) - Bathroom: Install exhaust fan (x1) - Replace old discoloured switches (x7) - Replace damaged batton light holder (x1) - Install NEW single GPO outlets (x2) Additional info: - Downlights: kitchen x3, living x5, hall x3 **All areas currently have 1 x standard batton light. - Switches to be replaced 1 x single switch (Vertical) 3 x single switches (horizontal) 3 x double switches (horiztonal)

I need 3 sensor lights replaced. Please find attached the photographs. I have the lights and all I need is to have the installed.

Replace existing split system power already ran to unit same kw just a swap over