Find experienced local carpenters in Highett

We need some help sanding our deck in preparation for staining . Need deck sander or to hire. Experience in deck sanding a must. it's about 10m x 12m surrounding a pool .

Hi there, I have a kitchen timber bench top(33mm) that needs a cut out (60cm circle). Small quick job for someone local to Highett. Budget under $100

We are looking to install wooden privacy screens for our outdoor deck. We have purchased the screens. We do not have the tools or hardware and like them installed. The screens will need to be cut to fit on the stairs and the back support for an in built bench( see pictures, makes more sense) The screens are 1800mm x 600mm and weigh 21kg No tools or hardware supplied I’ll measure again once I’m home but the total length of area to be screened is less than 2.5m in width

My timber (marbau) deck needs to be sanded and stained. I have the stain. Deck size 8 meters by 2.36

We are seeking the expertise of a skilled carpenter or cabinetmaker to design and install custom cabinets to fill the empty space above our kitchen cabinets. The goal is to maximize storage while seamlessly integrating the new cabinets with the existing kitchen decor. Here are the dimensions: 1) 400mm x 1180mm 2)400mm x 2450mm 3) 900mm x 900mm Due date: Flexible

Helping to build decking. General labouring

12 lengths of wood cut at 45 degrees at both ends to make 3 rectangles that are 900 x 400mm. To make trim for cabinet doors. The wood is 66mm x 11mm, curved on one of the long edges. I don't own a mitre saw so need some help!

Decking/sleepers have become rotten in places and all shall be replaced. Tasks: Remove existing rotten decking/sleepers and take away from site. Install new outdoor decking/sleepers (as supplied by client) upon existing frame support. Allow adequate drainage (space for water to drain between sleepers). Supply your own tools and all fixings (galv, bugle type or equivalent ) Area measures approximately 13m long x 600mm wide. (18 no. 2.4m long x 200mm x 50mm H4 Treated pine sleepers provided by client). Need site clean. Needed asap. ABN & insurance preferred. Quotes to confirm disposal is included in price. Confirm timing and availability.

Looking for somebody to help install wood slat wall panels in my bedroom, spanning a 3.3m wall behind the bed. If you are not familiar with the product please watch this video: https://wallpanels.com.au/pages/how-to-install-wood-wall-panels. As the panels are short of the ceiling height, we also need to fit a 67mm x 18mm skirting board along the 3.3m span. Need to bring a fine-toothed saw capable of making straight cuts, a Stanley knife, a jigsaw/equipment for cutting holes for power points, caulking gun for adhesive (Liquid Nails provided), spirit level, saw horses. I need 6 panels and the skirting board installed and I will have these ready at my home. Please have experience with similar installations.

Task Title: Joinery Install & Small Framing – Shop Fit-Out (8hr/day) Task Description: We’re looking for a reliable joiner or carpenter to assist with a shop fit-out in Highett. All cabinetry has already been CNC cut and is ready to install. Scope: • Joinery installation (everything pre-cut) • Small framing work • General carpentry tasks (onsite only) • 8-hour workday • Ongoing work available Requirements: • Must have own tools • Experience with shopfitting or cabinetry • ABN preferred • Must be punctual and professional 📍 Location: Highett VIC 📅 Start Date: ASAP 💰 Pay: 7-3.30 (depending on experience)

I am looking for a skilled furniture maker, joiner, or finishing carpenter to construct a custom bunk bed from solid pine. I will be supplying all the timber and materials. I am after a professional who can bring precision, safety, and finish quality to the build. Construction Type: - Two bedframes (top and bottom) — simple box construction using 190 x 45mm pine, butt jointed. - Four 90 x 90mm posts, to which the bedframes will be attached with lag screws - Slats, handrails and ladder are part of the build. Design Requirements: Clean, solid construction with attention to detail in joinery and finishing. No wobbles. Finish: Sanded and primed ready for paint finish. This job would ideally suit someone experienced in making custom furniture or joinery pieces. I am currently arranging shop drawings but would like to get started soon.

Yeah, I need 9 m of skirting installed by this Sunday, I will be supplying all the skirting and just need it installed. The project is new construction. I will be gut filling and painting. My carpenter has fallen sick so just need someone to fill-in

Would like a custom sliding drawers cabinet to fit inside my wardrobe. Cabinet to contain 4 drawers. Nothing fancy. The dimensions are 1000mm height, 650 width and 545 depth.

Need to File some wood off, for about 2 to 3 mm for a length of 60 cm, Twice, to fit in Dishwasher

Wooden bathroom vanity has stains and water damage. We need it fixed without replacing the wood top.

Need old timber removed and new timber installed at front of house. Picture attached.

Looking for an experienced handyman or carpenter to permanently fix a side gate post that keeps coming loose. The gate post is mounted into Hebel (aerated concrete) and has been repaired twice before but continues to loosen with use. I want it done properly this time . Details: • Location: Highett 3190 • Gate post is timber, mounted into a Hebel-rendered wall • Gate latch needs to be sturdy and functional after repair • Must be securely fixed to withstand daily use and outdoor conditions • Open to recommendations Photos attached for reference. Please quote including labour and materials, or let me know if you want to inspect first.

I have a stain on the couch with permanent marker that needs to come out please

I have a Truma water heater, with a tiny pin hole leak that I need welded over to seal it

I have a small, slimline shoe cabinet that needs to be wall mounted into plasterboard. Wouldn’t take more than 10 mins for an experienced handyman.