Find experienced local carpenters in Doncaster East

The bechtop is wood need to change it to stone, need carpenter to do

Sand, stain and vanish the interior window, around 6 windows. The task seems easy and I plan to DIY , I have all materials and did one window by myself, but it’s hard to finish all as I have to take care baby and it’s dusty when sanding. The area around the openable part of the window has been slightly affected by rain and sunlight, so there's some minor mould and will need a bit cleaning and more sanding. The rest of the window is in good condition and only needs light sanding, stain and varnish. I’d like to keep the original colour as much as possible. Please ensure: • Clean and neat finish • Floor and wall protected from drips or splashes Mould remover, stain and vanish paint, detail sander , UV clear paint , brushes, plastic floor protection all provided if needed. The price is negotiable.

I need a tv cabinet to be built. I want the panelling and cabinet to the side and the floating tv cabinet under. The whole thing floor to ceiling would be 3x 3m. I would like a light colour wood. I am looking for you to provide the final design and materials selection.

I have existing cabinets that I would like shortened in height to allow for a taller fridge. The existing cabinet should be shortened by cutting from the top of the cabinets then allowing for any remounting of door hinges.

I would like to fit a second oven to existing kitchen cabinetry .. currently the space is only 30cm in height and it needs to be 45 . If a cabinet make could remodel the cabinetry so I could fit a second oven this would be my preference . I currently have a small microwave in there as in picture

1. Task Title: Modify Overhead Kitchen Cabinet to Increase Fridge Height Clearance (Fridge Height: 1833mm) ________________________________________ 2. 📋 Task Description: We’re looking for a skilled handyman or cabinetmaker to modify the overhead cabinet above our fridge cavity. The current fridge space is 960mm wide and 1760mm high, and we need to increase the vertical clearance to fit a new fridge that is 1833mm tall. This will involve removing the overhead cabinet, reducing its height by trimming the bottom section (including the doors), and then reinstalling the modified cabinet higher up to create sufficient clearance. ________________________________________ 3. 🔧 Scope of Work: 4. Remove the existing overhead cabinet above the fridge cavity. 5. Trim the bottom section of the cabinet to reduce its height, including resizing the cabinet doors. 6. Reinstall the modified cabinet higher up to increase the fridge cavity height. 7. Ensure all cuts and adjustments are clean and professional. 8. Clean up any debris or dust created during the work. ________________________________________ 9. 📐 Measurements: • Current fridge cavity width: 960 mm • Current fridge cavity height: 1760 mm • New fridge height: 1833 mm • Recommended minimum clearance above fridge: 30–50 mm • Target fridge cavity height: At least 1863–1883 mm • Refer to attached photo for visual reference. ________________________________________ 10. ✅ Requirements: • Experience in cabinetry or carpentry • Must bring own tools and materials • Attention to detail and clean workmanship • Ability to complete the job efficiently and safely

I have one yellow tongue board measuring 80cm across x 170cm long. I need it cut to size 61cm x 169 and the corners rounded - it’s to fit on top of a massage table to make a flat surface. Doesn’t need to be super detailed job- just a quick cut n round the edges-it’s for a temporary solution. The job is to pick up the board, cut it to size and round the edges then deliver it back to me. I’m in Doncaster East. I need it done as soon as possible preferably before Easter and pick up can be available from today onwards. I’ll be back online in the afternoon. Thanks

I've picked up the oven and replacing with smaller size and need to add a drawer As shown the size of the new oven is smaller than old one so one part of the space need cabinet

Need licensed carpenter to make cabinet for the corner of the laundry to maximise the useful space of the corner. Ideas are welcome. Attached laundry photo and other photos are for ideas only.

We need a skilled handyman or carpenter to install a suspended ceiling frame in a room frame will be approximately 2.7m x 1.7m, including a manhole for ceiling cavity access. No ceiling panels, tiles, or plastering required—just the frame and manhole. Job Details: • Install a sturdy and level suspended ceiling frame • Create a manhole for access to the ceiling cavity • Materials provided (or let us know if you can supply)

sand, stain and add a protective layer on a dining table. 8 seater

Build new fridge cabinet to replace existing one, and new doors for current kitchen/ euro laundry.

Sand it properly and re stain using the same durable paint for the staircase for 2 coats

Need a carpenter to fix the rotten part of the door jamb. Its an external laundry door. See photos for reference. I also have a few other jobs to be done - hang 3 new doors with locks to be attached. Taking quotes for these.

One of the panels on our double garage door has come loose. It looks like 2 of the connectors have come apart and need to be replaced. The connectors/joiners need to be replaced.

6 internal cupboard doors to be hung 2 ikea pre packed cupboards to be installed

I have a stain that needs removing. Either that or remove and replace carpet. Quotes please

Updated my budget for task, would like to work around it to allocate the job. Bunnings panel as in pic needs to cut in right size and glue/nail to kitchen front panel Kitchen panel size 800mm x 1400mm Panel length 2700mm x 600mm so needs cut to size to attached to kitchen panel Quick job for handyman or carpenter Your glue, nail gun and any other material required. Prefer done in evening or this weekend. I’ve the panel, just needs installation

Supply cabinet doors for Tasmanian Oak for following 1. Supply two pantry Doors 2.Supply four doors for under sink and under bench 3 Possible bench tops replacement and refurbishing of kitchen caninet doors Thanks Andrew

I’m looking for an experienced handyman to help do a touch up for a water stain area on the ceiling. It is at the porch area of the property and the size of the ceiling is slightly above 1 square meter. Paint and Tools will be needed by you.