Find experienced local carpenters in Como WA

Jarrah deck - Sand back and re-stain Approx 30sqm with planter box - will supply stain

New Miele rangehood to replace old one (brand unknown). Overhead cabinetry will need some 'adjustments' before installation. Width and depth are all ok, but shelving will need to be removed for new rangehood to fit. Keen to keep the cabinet doors so the 'look' isn't changed. Not asking for installation of rangehood but measurements included to give an idea of mods required. No idea of cost so I've just put a guess figure in.

I need a 200 high 3m c 2m wooden frame- no floor. An internal roll bar made by forming a shelf inside the box or using pvc pipe. Can discuss .

I need help creating this ikea project https://champagnechaos.com/ikea-hacked-white-oak-sofa-table/ You must provide all materials

Handy man to put new cabinets doors and draws on. It’s an old kitchen just needs a face lift. Labour only - I will pay for materials I was thinking if possible to use existing hardware (needs new runners for the draws) And just reface the draws and cut new doors to size with wood from Bunnings (I can paint if needed )

Ordered an ikea flat pack - need to build these cabinetries. Got all the materials and can assist in the build.

Need to remove approx 2m by 1m dark stain from wooden jarrah floor as we are about to open home to prospective tenants. Do not want whole floor refinished.

Replace kitchen cabinet hinges

One kitchen cabinet door needing realigning. The door won’t close correctly. Please only apply if you are experienced in cabinet realignment 🙏

to install one kitchen cabinet, cut laminate bench top for glass hot cooking top, and join it with existing bench top.

Repairs of a kitchen cabinet and chairs

We've got a concrete slab in our 'living room' that we'd like to get some options for. We were thinking of either polishing or maybe epoxy, but we're open to suggestions! The area is 25m2 and we're located in Como. Our house is a 1950's house, and the living room is actually the old front sunroom/sleepout that they decided to extend with additional concrete next to the existing slab. One problem is the new half of the concrete is level, but the original half is sloped downwards about 2 inches. We like to know if it's feasible to level the concrete before considering making it look pretty or not (eg by polishing or using epoxy). It might also not be worth the effort. The concrete has been covered with laminate flooring and vapor barrier until now, we bought the house last year.

Polishing or rails of stainless steel gate Materials provided

Screed timber sub floor and level, fill holes 14m2

Build a cover box to cover electrical box with hinge flap

I'm looking for a carpenter to fix my kitchen doors. Could you please let me know what options do you have available? I'm happy to remove existing mirrored ones because it's too hard to clean and install something else my match the rest of my kitchen or new Design up to you.. thanks Anna

The job is a new timber deck 3m x 9m. The framework and deck timbers to be built and laid extending our existing verandah. The old timber verandah floor to be repaired in a couple of spots. There is access through a side gate and easy working access. Removal of approx 2sqm of concrete and 4sqm of timber deck. pic 1 existing verandah we would like to extend. pic 2 concrete to be removed pic 3 existing temp deck to be removed & rebuilt pic 4 verandah boards to be repaired/replaced pic 5 another angle of existing temp decking.

I have ordered the below fridge. Fridge recess is 900mm wide x 1900 high x 700 deep and fridge measurements are 796mm wide x 1798mm high x 606mm deep. So I think it should fit ok. I need the fridge installed and a cabinet front put on. https://www.appliancesonline.com.au/product/fisher-and-paykel-455l-integrated-fridge-rs80a1/

Single pantry cabinet to be removed and replaced with one ordered online from eKitchens. Plus an end panel also requires installation

Repair or build or buy pre build bathroom cabinet.