Find experienced local carpenters in Brighton East

I have a wooden cabinet that once held a old style TV. I would like the top of the cabinet lowered and some doors added to the opening.

Site preparation and protection of surrounding area Deck surface cleaning (high-pressure wash) Sanding deck surface to remove old stain/paint Minor repairs (nail replacement, gap filling) Application of deck oil/stain (2 coats) Final clean-up and disposal of waste Total Area: 6 Sqm

Build shelving in to kids wardrobe. One side to be straight shelving, the other side a hanging rail and one or two shelves low to ground for shoes/bags etc Materials must be supplied but happy to pay for them

Large deck to be re stained

the balcony door panel has rotted and when you open the door it hangs Cut out section of balcony door and replace with new timber section Plane and adjust the door Paint the door only 2 coats

I need a small deck sanded and stained. It is in 2 sections 2m x 5.5m and 1.2 x 1.5m plus 4 steps. Access is easy and the deck will be cleaned and ready Saturday 12th

3 x timber doors need to be sanded underneath and re-installed, after a recent new carpet installation.

Bought a pine timber bench top but ordered the wrong width. We want to cut this down from 900mm wide to 450 mm wide if it’s possible with this type of board.

I need to install a ice machine and need to remove some cupboards ( doors ) etc to make cupboard space to be able to install ice machine - need to also make it look cosmetically good

Sand and stain deck 4.5M X 7.0M

Carpenter required to remove angled wall between kitchen and bedroom. Rebuild new wall in line with laundry door Please see photos for more information

Looking for someone to offer a quote for the following task. Looking at creating a walking in robe. 2.4 m × 2.4 Currently the space is a back shed room and a tool shed on the other side. So need to create an entry from the shed room to the extra space on the tik side. Images added showing where we want entry to the other side the tool shed. Image of tool shed to be famed and cabinetry sizes from Ikea. Need framing, plastering, painting, insulation and 2 GPO's

Need a carpenter to: - remove two angled walls in kitchen and make the area square ( highlighted in red ) - install flat pack kitchen ( about 15 cabinets) - cut and install stone bench top Have attached pics of existing kitchen to illustrate size Just trying to understand cost and appreciate full measure etc is required. Thanks !

Looking for a carpenter to do a Laundry Cabinet as part of a Euro Laundry I am actually looking for a custom version of something like this - https://www.thebluespace.com.au/collections/laundry-cabinets-for-front-loader/products/otti-bondi-1305mm-fluted-laundry-set-b-white Measurements I need are: Width - Around 1300mm Depth - 560mm (the product above is 600mm so I need less depth - thus why this request) Laminex Benchtop will be fine (don't need stone) Will need to remove existing basin.

I need a suitably qualified cabinet maker, carpenter, handyman etc to install bathroom fixtures. Items to install are: 1200 wall hung vanity Shaving cabinet Toilet holder Shower Soap holder Towel rail The bathroom is fully tiled so must have experience drilling into porcelain tiles. Also should have a stud finder. Refer to photos for additional info (note that grout will be done before this job starts)

Render 3 external walls ground floor

Supply and install cabinets - Supply two cabinets side by side with front doors and optional slide in shelf in the middle of each - Drill cabinets into tile walls (see picture of empty space) - Off white/matt white colour (similar style and design to the picture) - Current space measurements (1300cm width x 590cm depth x 1000cm height) > fit must be less than this

The shelves are built strong but the finishing it’s terrible. They were cover with hybrid waterproof flooring but they might need something else to look seamless and clean.

I have a cabinet with a stain I’d like sanded back. To be completed in the next month.

We have an oily stain on our floorboard that we need removed. We have tried to scrub with a mild surfactant and gumption but neither worked and have slightly worn down the board around the stain.