Find a professional awning contractor in NSW

I need the awnings in the photos to be put up.

Install 180 Kings awning free standing. Need it then put on the car.

We have three retatractable cassette awnings and two have had a recent power cut that has 1) unpaired one of the remotes and 2) our wind sensor self retracting awnings is continually retracting itself about 30 minutes after we extended it . Whilst we have followed somfy guidelines for jogging and resetting all attempts have failed and we now require a professional that is familiar with somfy brand to reset the programs on these two awnings.

Quote for Awning At my backyard, I need to install a fixed polycarbonate awning. Dimension: approx 3.5 metre wide x approx 2.1 metre depth. Might require only one post as the other 3 sides are existing wall. (pls check the picture) Ensure proper slope and alignment. Apply waterproof silicone where necessary Something thats strong, resilient and long lasting. Also Remove existing setup and dispose. Pls share pictures of similar work that you have done. Installation must be perfect that water/dust does not leak inside the polycarbonate over time.

Quote for below At my backyard, I need to install a fixed polycarbonate awning. Dimension: approx 3.5 metre wide x approx 2.1 metre depth. Might require only one post as the other 3 sides are existing wall. (pls check the picture) Ensure proper slope and alignment. Apply waterproof silicone where necessary Something thats strong, resilient and long lasting. Also Remove existing setup and dispose. Pls share pictures of similar work that you have done. Installation must be perfect that water/dust does not leak inside the polycarbonate over time.

At my backyard, I need to install a fixed polycarbonate awning. Dimension: approx 3.5 metre wide x approx 2.1 metre depth. Might require only one post as the other 3 sides are existing wall. (pls check the picture) Ensure proper slope and alignment. Apply waterproof silicone where necessary Something thats strong, resilient and long lasting. Also Remove existing setup and dispose. Pls share pictures of similar work that you have done. Installation must be perfect that water/dust does not leak inside the polycarbonate over time.

Fabric rolling off roller. Need replacement part - awning post & end Awning not locking in when retracted, may be because post & end needs replacement.

Box awning with drainage. Have to comply with council.

Task Install outdoor awning (i will supply). This will require 2 people to hold it together. The awning does not have fasteners to hold the plastic in just a few seals etc. so you have to tie ropes or something to keep it together while you hold it up and drill the holes. Need you to put in 4 Dynabolts sleeve anchors to securely fasten fixtures to brick wall.

Fit awning above my solar battery. Awning is assembled and it comes with the fitting bolts.

Need a kings 270 xl awning installed. Have the heavy duty brackets there. To be fitted to roof rack cross bars.

I purchases two of these aluminium awnings which I need installed above my external solar battery in the side lane of my house. Size is 0.8m x 1.2 m https://www.carportsandoutdoors.com.au/products/aluminium-bracket-awning-white?variant=49021840064819

Need a handyman for two jobs: 1. Reattach top hinge on a timber-frame security screen door (without removing the whole door). 2. Repair small sections of timber rot on side brackets of window awnings - just patch or replace the damaged bits, not a full rebuild. Photos attached. Located in Milperra 2214.

In need of someone to come cut take down an takeaway my metal owning coming off my garage and shed

We’re looking to have someone (likely 2 people) hang an 3Mx2.5M awning outside. It weighs 300gs/m and will be going into our concrete wall.

Few minor jobs: Install 3 Small window owning, Patch and paint mutiple holes Small ceiling lining, paint 5 doors. It is a about a long day work. I can help if needed. Task price is hourly rate. If finishes in less than a day still will pay for a long day based at 10 hours work so 400 is minimum pay on the top of Airtasker payment. But need an invoice.

Kings side awning install 1. Adventure Kings 2.5m x 2.5m Side Awning • Dimensions: 2.5 m (vehicle side length) × 2.5 m (pull-out depth) • Rating: UPF50+ sun protection, waterproof canvas • Hardware included: 2x L-shaped steel mounting brackets, U-bolts, nuts, washers • Frame: Aluminium with telescopic poles & arms • Bag: Heavy-duty PVC cover • Accessories included: Guy ropes, steel pegs, telescopic legs (integrated into frame) ⸻ 2. Adventure Kings 2.5m Awning Side Wall • Dimensions: 2.5 m (length) × 2.5 m (height) • Material: Waterproof polyester with UV coating • Fixing system: Heavy-duty zippers and Velcro tabs (attaches directly to Kings awning) • Purpose: Provides shade, wind protection, and privacy on one side of awning ⸻ 3. Rola Drop & Turn Channel Bolts (M8 x 20 mm, 4-pack) • Thread: M8 (1.25 mm pitch) • Thread length: 20 mm • Base: Drop-and-turn style head designed for T-slot roof rack channels • Material: Stainless steel • Function: Secures Kings L-brackets into Thule WingBar Edge T-slot

Hi there, I'm looking for a professional or experienced handyman to refresh the awning of my third floor balcony. Dims of area: Approx 764cm long x 100cm at the widest part. Height around 2.5m She's looking a little tired with cracked old paint (attached photo of the worst part), assume it will need a good sanding down then a fresh coat of white paint. There is some rot (?) to the wood at the edges so I'm open to hear how you might tackle this. It doesn't have to be perfect, just tidy - so if i can get away with not replacing these parts of wood that would be great! We do have a small cat enclosure beneath part of the area, could remove the roof of this for access if needed. Must have insurances and safety equipment if necessary. I'm around Wednesdays - Fridays so if those days are convenient, I'm flexible on times :) PLEASE NOTE: My 'offer' is not in any way accurate. I have to put something in as per AirTaskers rules. I'm open to any quotes that are reasonable and in line with your pay expectations based on your skills, experience and current Sydney market rates. In your quote can you please specify the scope inc. works you see need completed and rough time estimate. Thank you!

Installation of a window awning.

I need an awning to be assembled and installed into a brick wall above my solar battery system. The battery system is installed down the side of my house as pictured and I have purchased a basic awning that is 1.5m wide and 1m deep. It needs to be installed as pictured (MARKED IN RED). Approx 2m high from the base metal platform pictured. Will require a basic tools (hammer drill, plugs and strong bolts to secure and a ladder). Awning is new in the box and needs to be unpacked and assembled and will look like as pictured.