Find a professional awning contractor in Inner West Sydney

I need to get a non motorised bunning awning fixed https://www.bunnings.com.au/windoware-3-x-2m-charcoal-easy-fit-awning_p1262181?store=7316&gclsrc=aw.ds&gad_source=1&gad_campaignid=22214611398&gbraid=0AAAAADtbEB_8sKObGkLWJpvBbSWmaRCw7&gclid=Cj0KCQjw54nRBhDCARIsAMcY_SD_r1eyy4PX_0Ur-iU-Z6EP-wlO8RUKAnxZiwlvGNwWJ3xbM3u-lEYaApT2EALw_wcB

I have a sign that needs to be fit on to a light board for both sides and a sign for the awning on top of the shop to display for the public

Temp awning above external laundry. Currently roof sheet is held in place by bricks but this is a safety risk. Need to secure roof sheet by connecting it to the existing metal truss or some other means.

I require assistance to install a pivot arm awning on my balcony apartment. Requires technical expertise to drill into apartment building brick safely. I dont have the awning yet but would like to consult with you first on installation options before purchasing the awning.

Needing to uninstall old car awning and reinstall new Kings 270° awning to vehicle roof. Tools and equipment available, just lacking the experience and willpower to execute ;)

Need someone to help fit and awning to camper. Awning weighs 36kg and will need to be supported overhead so you need to be relatively strong. Should only take between 1 and 2 hours but will pay extra if it takes longer.

Luxaflex Somfy outdoor awning not responsive to remote. Need help with resetting the motor

Awning fell off the wall during strong wind. The top mount has broken and two mounting screws missing. Need help re-attaching it to the wall. Requires multiple people to install it - it's not too heavy but it is awkward to handle.

I would like someone to construct a small awning / pergola down the narrow side of my house to store my bikes out of the rain. The structure would need to attach to the side of the house. The long side of the awning would be attaching to a modern Hardie plank weatherboard clad wall, whereas the short side would need to attach to double brick. In the diagram below, the res depicts the structure I'm requesting to be built. Dimensions would be 5.2m by 0.9m. It would need to attach to the house at about 1.9m above the ground with a gentle slope so the rain could run off (no need for a gutter). So likely to need brackets and some support frames to then hold up something like a Suntuf polycarbonate clear plastic roofing. Please see photos of the area in question and aerial sketch. I would be keen for someone to inspect the site so we can discuss best design & materials before purchasing the materials. The main discussion points is probably whether it would require a support post at the near end. Im happy to either purchased myself or you can, but either way I will fund the materials so please don't include those in your quote.

‘To attach 8 fibreglass sheets under a first floor deck, to provide a cover for downstairs area. Frame for them to be attached to is already in place. Fibreglass sheets and timber roofing screws provided. Will need to bring a long ladder. “

Replace current awning (black and white stripes) with similar to the pictures( pink)

I’m looking for a professional awning fitter to install a Zip awning for a client. The awning is approximately 7 m wide and 3 m high. The fitter will install the brackets, and you will likely need 2–3 additional people to assist with lifting the awning onto the brackets. This is a 2–3 hour job max. Total payment is $900 for the job, which you may split among your team as you see fit.

The arm on our awning has been detached from the canvas in a high wind. It needs a nut to hold it back on so we can wind in the awning

Outdoor awning needs to have a canvas patch applied to tears being caused by the rollers. I will supply adhesive canvas patch. The awning rollers will need to be unbolted & repositioned as well. Need someone who is familiar with awning repairs

We will have about 4-5 inflatables to be installed on top of an awning. It needs to be fastened

Mount a 3 x2.5 m motorised awning to the wall of a granny flat above the slide door. The awning has been mostly assembled but needs some assembly. Mounting will be onto a metal framed clad wall. Willing to pay for additional material if reinforcement is advised. Willing to pay extra if power for the motor can be connected directly to the mains instead of plugged in.

The electrical motor does not work

In the last windstorm the awning sensor did not retract and so it was brought down in the storm and snapped from the bolts. the canvas retracted separately to the extendable arms . the motor moving the canvas is all still working . If the pieces that attach to the arms that hold the canvas can be replaces it can be remounted .We are seeking assessment for parts and repairs. this site will not accept our images

measure and quote on a reskin for a folding arm awning

5 metre approx … replace canvas