Find a professional awning contractor in Sydney

second storey awning window has suffered water ingress and the sash at the bottom needs to be replaced.

Small section of the timber awning on front porch damaged. Needs to be removed and new timber panels added. Then paint. Materials can be supplied or supply your own for extra charge. See pics. 2nd job. 2 sides of the trim around front door glass fell off and needs to be refitted. Temporarily in place with nails. Will likely need new pieces but seeking advice. Can supply wood in need.

Awning crank gear box has snapped off and need replacing.

Install the polycarbonate material provided to you to replace the one you see. Frame is solid and stays put.

I’ve got 2 Instahut 2.5m Manual retracting awnings I need installed on the wall. It’s a concrete wall I believe. See image and ai of how I want it to look

One of my awnings got blown off by wind and I had to throw it away. The bars are still attached and in place, so I’m guessing a new shade is required that can be fixed on the existing bar. Would be great if the shade could be matched to the existing print I have or be similar. Thanks. Measurements are width: 3650mm Height:1100mm Depth: 1100mm Shade length: 1550mm (approx)

Install 4x awnings above door and windows on second story of terrace house

I have an awning on a small balcony on the sixth (and top) floor. The awning extends over the water. The canvas is badly torn, but the folded arm mechanism is fine. I am looking for someone to take on the job of replacing the canvas - to find a supplier, obtain a quote, once approved, to manage the job.

New double doors leading into courtyard and new timber awning needs painting

one part broke (new part arrived ) just needs to be put back together

Install a 2m x 3m vehicle awning on existing roofracks on a Mazda CX-5. Must be a professional installer who can guarantee their work

I have an 'Instahut' brand polycarbonate awning, measuring 3m x 1.5m, that needs to be assembled and installed into concrete above the door on our rear terrace. I have product and fixings, just require someone to do the installation. Strata approval already obtained.

Mount my kings 270 awning to my prado. It will be mounted to 3x rhinorack sportz bars mounted onto a rhinorack backbone. I have some m6 t bolts ready to use.

Build or source and install awning for rear courtyard similar to the attached photo. Size should be roughly 360 cm wide x 65 cm deep. Roofing material should be clear polycarbonate and frame should be aluminium in grey monument colour if available.

Remove retractable arm motorised awning from side of house. - 5.4m x 2m

Scope of Works Level 3 Structural Installation and Roofing Extension Project Installation of pre-fabricated steel structure Location Level 3 Commercial Terms Fixed price contract capped at fifty thousand dollars No variations or cost overruns will be accepted Required Qualification Builder must hold a valid Class 2 Builders Licence and provide certification at completion Project Overview The steel structure has already been fabricated and is currently stored in the garage. The builder is not responsible for fabrication. The builder is responsible for transport within the building, installation, fixing, roofing extension, drainage, finishing, compliance and handover.

A bit of an unconventional task. I’m a renter, so I can’t have a proper AC set up. My only solution is a portable AC. I’m not a crafty or handy person, but I also don’t want flimsy cardboard boxes or pieces of cloth against my window. I need help executing the idea attached in the photos. Likely need a custom solution to perfectly fit the measurements of the awning windows. The job will involve closing off part of a large awning window with a suitable board/panel and cutting a hole to suit the exhaust hose, ensuring a neat look. I also want the light to still come in. The sides of the awning window will also need to be sealed. Along with the bottom part. (I only have the hose). You must supply all tools, materials and fittings required and be confident working with non-standard window setups. If the installation is successful and the unit runs well, we will be purchasing an additional unit and will require a second installation — and will book you again! De'Longhi PACA100 Portable Air Conditioner Also attaching measurements as photos HAHA since I’m not confident regarding precision, so I’d rather you see how I emailed them 🤣

We have a small 1m awning and wall hung bike rack that needs to be hung on an exterior brick wall. Also a mirror to be hung in a bedroom. Needs someone professional as we don’t want the walls damaged. Thank you.

Awning installation Side of house 5 metres x3 meters Alongside with outer door rubber water shield ( to be installed)

Need an existing motorised awning cleaned and re-secured to shade the courtyard