Find a professional awning contractor in Blacktown

1. Prepare plasterboard surface (approximately 4.5m x 1.2m) (currently painted white and showing small amounts of mould) for painting. 2. Paint 2 coats of anti- mould WHITE paint. 3. Clean up, remove items. No equipment, ladders, sheeting can be provided- all paint, equipment and supplies to do the job must be supplied and all cleaned up. Job will be done without supervision and no access inside the house.

Install plastic awning into hebel wall and install plastic awning into metal gutter

Hi there, I need an experienced handyman to help remove an old metal awning and install a new one above my laundry door. What needs to be done: Removal: Detach and remove the existing old corrugated metal awning (as shown in the first picture). It is fixed to the exterior wall with support arms. Installation: Install the new polycarbonate awning (already fully assembled by me, shown in the second picture) onto the same exterior wall. Important Details: Wall Type: Rendered brick/masonry wall. You will need a proper hammer drill . Height: The awning is located just above the standard door frame. You will need to bring your own ladder. Tools: Please bring all necessary tools for removal and installation (ladder, drill, masonry bits, etc.).

Looking for a handyman or carpenter to: • Repair wall holes from old awning removal (1 larger hole + multiple small holes) • Apply sealing/ waterproofing • Install timber battens (decorative) to cover the horizontal line • Optional: repaint for a clean finish 9 Location: Stanhope Gardens NSW No structur ork required Photos attacned

I have a flat pack fixed awning to assemble and install in a small courtyard. It looks like a straightforward job for someone handy.

Looking for an experienced handyman or roofer to install a polycarbonate (PC) awning above the balcony of my study room. Measurements: Approx spans 4.4m x 0.9m Photos attached. Requirements: •Must supply materials (Flat Polycarbonate UV diffused sheets preferred) •Use the exisiting structure •Ensure proper fixings •Install required flashings and ensure roof is wind-safe and weatherproof •Experience with awnings, pergolas, or similar installations preferred Please specify sheet thickness and quote for labour + materials. Happy to arrange site inspection before quoting

I have an awning that I need screwed on to an external brick wall. I have the materials but not the tools.

Install of a door awning into brick wall. 1.5m x 0.9m. Product on hand, just requiring the install. https://www.landera.com.au/door-awning/door-awning-nancy-15m-x-09m-4-larger-sizes/

Require awning Installation 3x total - different sizes Awning already assembled, just needs installation. Photo for brand reference

install a 2mx 1m awning onto a rendered brick wall.

Looking for an experienced handyman or roofer to install a polycarbonate (PC) awning above my backyard pergola to provide rain and sun protection. Measurements: Approx spans 4.2m x 3m. Photos attached. Requirements: •Must supply materials (Flat Polycarbonate UV diffused sheets preferred) •Use the exisiting structure •Ensure proper fixings •Install required flashings and ensure roof is wind-safe and weatherproof •Experience with awnings, pergolas, or similar installations preferred Please specify sheet thickness, warranty and quote for labour + materials. Happy to arrange site inspection before quoting

Started to build a bike shed but no time to finish. Also, want to put up small awning over an outside garage roller door to cover gap and protect the door.

Require a 360 degrees awning install in the hilux from Kings

Outdoor Pergola Required 2.5 x 2.9 Must be totally water proof and have a downpipe running into the garden off the gutter Rouse Hill NSW

Looking for quotes for a pergola with gutter done about 3×3.3 concrete base size. There was a storm damage to the existing one.

We need automatic blinds/awning installed around the pergola

Hi, I need someone to repair the damaged timber shade/awning at the front of my house (see photo). The top section of the awning has rotted/damaged wood, and part of the covering is coming apart. I need: • Inspection of the damaged timber • Removal of rotten/broken sections • Replacement with new timber/boards • Sealing + repainting to match the existing colour • Ensuring the structure is sturdy and weather-resistant The area is easily accessible from ground level. Location: Glendenning NSW 2761 Photo attached. Budget: $250 – $300

- Install a 2m x 1m awning above an outdoor solar battery unit. - Relocate an existing brick-wall-mounted clothesline to a nearby position. - Patch and repair the brick wall as required after relocation.

Fit awning above my solar battery. Awning is assembled and it comes with the fitting bolts.

If possible provide and mount awning to the wall to cover Tesla Powerball 3 battery.