Find a reliable appliance technician in Nunawading

Coffee Machine Service – Breville Barista Pro Looking for someone experienced with servicing/repairing Breville Barista Pro coffee machines. I purchased the machine in June 2023 and it is currently experiencing a couple of issues: * The steam wand appears to be leaking water / not functioning correctly. * Coffee has developed a very bitter taste, even after descaling and regular cleaning. Kindly be advised that initial assessment is offered for free by businesses so I would expect a free initial assessment and based on cost would decide if I want to go with the repair. Please let me know your experience with Breville Barista Pro machines and what your service would include.

Water leaking from hose to connections Can’t get the right o ring to fit

Replacing my current ~53–54 cm freestanding oven/cooker with a 60 cm model. Need the left benchtop and its base cabinets moved left and the benchtop trimmed so there’s a 600 mm clear gap for the new cooker. Location: Nunawading What needs to be done 1. Remove base cabinets on the left side of the current freestanding oven. 2. Remove the left section of benchtop above those cabinets. 3. Reposition that benchtop further left along the wall (towards the door frame) to create space for the 60 cm cooker. 4. Reinstall base cabinets under the benchtop, starting from the new left edge. 5. Cut the benchtop at the end near the cooker so that, once reinstalled, there is a 600 mm gap between: • right edge of left benchtop, and • left edge of right benchtop (where the new 60 cm freestanding oven will sit). 6. Apply silicone sealant along the top edge of the benchtop where it meets the splashback. Assumptions / exclusions • Carpentry/benchtop and cabinet work only. • No plumbing or electrical work. • Freestanding oven will be disconnected/moved by me (or via a separate task); tasker doesn’t need to handle the appliance unless agreed. • Existing cabinets and benchtop are reused, not replaced • Small adjustments to align doors/drawers after reinstallation included. • Clean‑up of offcuts and reasonable job‑site tidy expected. What I’ll provide • Clear access to kitchen and cabinets. • Exact new oven model/dimensions before work starts (so the 600 mm gap is correct). Please include in your offer • cutting my benchtop type: • Estimated time to complete. • Tools you’ll bring (e.g. circular saw, jigsaw, clamps). • Photos of similar benchtop/cabinet relocation work if available.

LG dishwasher stuck in error code “nE”. Serial number/model number in photos, need this fixing asap, located in our childcare centre. Current WWCC preferred but not essential.

The knobs on my Technika gas stove get stuck and occasionally don't turn. Needs to be repaired and all 4 knobs need to be replaced. I do not have replacement knobs so, happy to pay additional cost replacement knobs. Stove top has not been serviced or repaired since I moved into this property in 2019. *6/7/26 - Update: 4 knobs now do not turn at all. Even removing the plastic knob cover, the metal rod (?) underneath also doesn't turn when using a wrench. It appears to be an issue with the cook top itself. I have broken one of the plastic knobs trying to turn it, so ideally want to replace all 4 now.

Wanting to change my current electric stove to a new induction stove. The induction stove will be wider so my wooden bench top will need to be cut. There’s a power source going to the electric stove so I’m not sure what needs to be done to make it usable for the induction. Let me know what details you need for the quote. I’ve just put in the $100 budget to get the post going but I know it’ll cost more than that. The model of the new stove is a Westinghouse WHI942BE. I’ve attached photos of the old cooktop and the switchboard

Licensed gas fitter required to replace existing Bosch gas cooktop with a new one. The dimension of the new Bosch gas cooktop I bought from The Good Guys (Height:51.8 mm, Width:580 mm, Depth: 510mm) is practically the same as the existing Bosch gas cooktop in the kitchen except the depth of existing Bosch gas cooktop is 500 mm instead of 510 mm so the replacement should be fairly straight forward. You must hold a current gas fitting license (Type A). Please supply quote which includes issuing a Certificate of Compliance/Certificate of Safety after pressure-test the gas line, check for leaks and verify flame quality.

I need to pull out the old oven to fit in the new electric oven

Old Vulcan gas heater. I’d like to replace it with a new mounted electric fireplace heater

My electric standing desk has an issue where the drive rod/adjustment knob is completely jammed. It is a plastic knob that should move anticlockwise/clockwise with bare hands, but somehow it is jammed. Need someone to loosen that up.

Nordic track s45i treadmill. Power connected but screen blacked out and won’t turn on. Tried reset technique but still not working. Also tried tightening track belt.

Only 1 hot water service and 2 heaters. Need certificate confirming gas compliance for rental property Gas Safety and Carbon Monoxide Testing  All gas appliances, fittings and flues must be inspected and tested by a licensed gas fitter every two years to confirm they are operating safely.

I have an Impulse ECE5 elliptical cross trainer located in a small personal training studio in Reservoir, Melbourne. The machine powers on and the resistance works normally, but the display screen is blank and does not show any information. The buttons respond and the console beeps, but the screen does not illuminate. Looking for someone experienced with gym equipment or elliptical repairs to diagnose and fix the issue. It may be related to the console display, backlight, or internal wiring. Photos can be provided if needed.

My GHD Straightener flashes red and beeps. Seems like the heating element is not working. Please help me fix it. Thanks.

To install a brand new LG washing machine to my laundry

I need someone to install 2xsmall chandelier which I bought it recently.

We have got a Bellissimo oven that has recently started to behave inconsistently. No matter what temperature or oven setting we do, the oven burns with a very high temperature and burns the food. We would need an Oven-technician to diagnose the issue and suggest how to fix this.

we are looking for an experienced garment screenprinter familiar with automatic screenprinting machine

One of the burners on my gas stove is not working with the ignition button. Gas is flowing fine, and the burner works when I use a matchstick, but the built-in igniter doesn’t spark.

I need someone to remove the kitchen cabinetry next to my sink so a dishwasher can be installed. I also need them to patch up the cabinet so it doesn't look unsightly. The base board and toe kick area of the cabinets to be removed appear to be shared with the adjacent sink cabinet. The resulting dishwasher cubby hole will be 61cm across, 59cm deep, and 86cm from floor to bottom of countertop.