Find a reliable appliance technician in Bondi Junction

My fridge has been leaking every once in a while since we moved house and reinstalled it. I never bothered to fix it but will need to. Can someone please come and check the issue out?

My Westinghouse house oven, stovetop gas ignitor will not stop clicking. I believe one of the four ignitors (far back on the left) needs to be replaced. But it may potentially be worth replacing all four just to be safe. I've tried cleaning the surrounding area and re-positioning the gas stove tops on each one, which has fixed it for a short period. But it occasionally gets set off when the stove top gets hot or I rest something heavy on the gas top. This would would require a licensed electrician to complete. Although I know this is probably a five minute job to fix (assuming you have the spare parts as I do not). Ideally please come to the job with the required spare parts to complete it. Have provided oven details in the images in case this is helpful. Not bothered about when this is done -ideally in the next 2 weeks on a Mon, Wed or Fri would be great.

Sometimes stocked inside the drainage of dishwasher Maybe food or only need cleaning the pipes It shows the error code EC Brand name is ILVE

My Miele washing machine showed an error, and now it keeps tripping the electrical circuit and won’t work.

washing machine leaked need someone to take a look

Our washing machine leaked the other day. We're now worried to turn it on again. I think the pipes need securing. Can someone come round and have a look?

After small stovetop fire, the integrated range hood is irreparably damaged, needs replacement, some of the external cabinet doors need repaired and tiles needs a clean.

Washing machine has been left at our new apartment in the communal washing area but the machine is not connected. It seems the pipe/pipes we have are too short.

Hi I require an experienced dishwasher repairer to come out and replace the buttons on my dishwasher and they need realigning. I have to stick my fingers in the dishwasher hole area to get the dishwasher working. Please see pictures. The dishwasher works perfectly. I still have three of the buttons, but I’m aware that you can buy the panel itself. The offer is just for the labour not the parts. If you can come out and do the job Monday or Tuesday at 3 pm that would be perfect.

Machine turns on and when put mix inside it says error and low mix - won’t freeze and won’t work need someone who has experience to work on it Machine https://www.newsaier.com/Soft-Ice-Cream-Vending-Machine-pd48246066.html

We recently moved into a house. The dishwasher appears to be connected but when we run it, no water comes into it. I suspect it’s a very easy fix but keen to have it sorted.

The repair is for my built-in Bosch oven (HBA13B150A/01). The oven function stopped working 2 weeks ago, while the other functions, including the grill, remained working. When I switch on the oven, I hear a humming noise but my fan doesn’t spin. When I try to turn the fan by hand it spins freely, which leads me to believe that an electrical component has failed, and that the repair could involve removing the oven.

The machine is a Bosch Series 8 front-loader heavily leaking a steady stream of water from the middle-back floor pan. The rear inspection panel has been removed and verified that the heating element seal, main tub casing, rear drum bearing hub, and upper water inlet valves are completely bone dry. The water is escaping rapidly from a hidden component completely underneath the tub shell structure, likely the lower tub-to-pump interface or an air pressure chamber seal.

My clothes dryer is making a loud grinding noise when turned on, model number below. I need a service please The Simpson 39P400M-V1

The globe needs to be replaced but is situated behind the thermostat controll box so I have not been able to remove the globe. The refrigerator is a Fisher and Paykel 260litre that I purchased second hand so I have no instruction manuals

My washing machine is not draining and it needs to be repaired. I believe it might be a clogged hose as the machine is only 2 years old. The machine sits under a dryer so the dryer will have to be lifted off to access the machine. It is for my airbnb property and the guest is arriving today so ideally today or tomorrow would be great.

I’m looking for a licensed electrician to complete the electrical installation of a large AOKE cardboard cutting plotter. The machine has two Redbo regenerative vacuum pumps (2.2kW each, 220–240V single phase) that connect through the supplied electrical control box. The control box needs to be hardwired into the building’s electrical supply and the system tested to ensure everything operates correctly. Scope of work: * Inspect the supplied equipment. * Hardwire the supplied electrical control box. * Connect and commission the two vacuum pumps. * Verify correct operation of the machine. * Ensure installation complies with Australian electrical standards. * Advise if any additional circuit protection or electrical work is required. Equipment details: * AOKE cardboard cutting plotter * 2 × Redbo regenerative vacuum pumps * Single phase 220–240V * 2.2kW (13.7A) per pump * Electrical control box supplied I’ve attached photos of: * The vacuum pumps * The pump specification plate * The supplied electrical control box Please only respond if you’re a licensed electrician with experience installing commercial or industrial equipment. If you’ve worked with CNC machines, routers, laser cutters, vacuum pumps or similar machinery, please mention that in your offer.

My Bosch Series 4 washing machine is having a draining error. E18. I’ve tried cleaning the pump filter but the error is still happening. Are you able to assist? See the photos of washing machine and then the pipe set up.

Just moved into a new unit and need the washing machine connected properly. I’ve tried myself but a error message appears on the machine for poor drainage

I have a 3 group Faena coffee machine to plumb in.