Hire trusted appliance installation services in NSW

Remove the existing range hood exterior vent cap from the brick wall by cutting the old sealant, clean off the remaining adhesive. Then install a new vent cap using construction adhesive and exterior silicone sealant to ensure it is securely fixed and weatherproof. It is less than 3m high and I can provide the ladder. Attached images are the current cap and new cap to be installed.

Description: I need a licensed and qualified installer to remove existing SMEG 600mm undermount range hood and install a new SMEG 600mm SHU670X (supplied). Scope of Work: - Remove and dispose of the current range hood. - Install the new SMEG SHU670X - Modify existing joinery and melamine duct cover to fit the new unit, including a new melamine front panel. - Ensure safe connection, fully operational and compliant with safety standards. Requirements: - Licensed and insured - Experience with SMEG range hoods and kitchen joinery modifications. Notes: - Both the existing and new hoods are 600mm. Modifications are required due to the ducting and joinery. - Photos of the current setup are attached for reference.

I have a new 120cm outdoor rangehood I need installed in our undercover alfresco area.

Install rangehood with adjustments all inclusive, power point, remove old one. WRR604SB model

Need electric stove unplugged and new one installed

Everfit trace mill Need be installed

I need a licensed electrician or qualified installer to remove existing range hood and install a 600mm undermount kitchen range hood that I will supply. The job includes: - Removing and disposing the current range hood - Installing the supplied undermount range hood - Modification works required to fit new range hood to complete this job - Ensuring it is safely connected and fully operational Please provide your earliest availability.

I've fitted a new induction cooktop and I need an electrician to run a 32A dedicated circuit with an isolation switch please. Full brick, double storey house.

Need hose to be installed on a brick wall. It's a simple task, I have all required attachments, simply needs to be hung on brick wall.

Hi. I need an Omega 60cm Brushed Stainless Steel Slide-out Rangehood (model number ORT6WXA) fitting. Old rangehood removed. New rangehood purchased. 240v power supply available. Needs 6x 4mm holes drilling in the right place and the rangehood securing. Unable to do myself as recovering from surgery and cannot hold rangehood in place whilst drilling holes and setting up so it slides open etc. Am flexible on timing but would like the work done in the next few days if possible.

Please remove and take away old cracked induction cooktop. Install new cooktop: Linarie Rennes 60cm 3 Zone Induction Cooktop LS60I3Z

I have ordered a brand new stove top (MATMÄSSIG induction hob 59 IKEA 300 black AP) need to be installed, to replace the old one, which is exactly the same size.

We need a qualified electrician to install a new built in Bosch 60cm oven and remove and dispose our old 60cm oven. Located in Forestville - easy ground level access.

Our rangehood broke over the weekend. I ordered the exact same unit from Bing Lee, and it is due to be delivered by 3pm today. I'd like someone to come and remove the current one and install the new one. There is some grease as it is a range hood. Thanks!

The cabinets are installed need to install Oven and free standing hood.

Hi all, I need an oven installer and the old oven taken off. That's all

Installation of force usa c10 all in one

Remove old rangehood and install new one. Existing rangehood is a 90cm pullout Omega. New rangehood is a 90cm fixed Omega https://www.appliancecentral.com.au/orf90xl-omega-90-cm-stainless-steel-fixed-rangehood?language=en&currency=AUD&gad_source=1&gad_campaignid=11267016658&gclid=Cj0KCQiAprLLBhCMARIsAEDhdPe-OOj4ynlTxLLPbhMcawY6uVQIhYdzB2ua4L6w2I9vtTMfK2YIBDUaAiHCEALw_wcB

Oven Installation – Licensed Electrician Required Looking for a licensed electrician to install a new Westinghouse oven. Old oven has already been removed Existing power wires are taped and ready for connection Standard oven installation – nothing fancy Would like the job done Thursday if possible Please send through any questions or let me know what you need to quote accurately. Thanks!

I need an experienced installer to swap over a fully integrated dishwasher in an apartment. The Job: • Disconnect & Remove: Old Smeg fully integrated dishwasher • Cabinet Panel Swap (CRUCIAL STEP): Remove the matching wooden cabinet door from the old machine and install it onto the new Bosch Series 6 • Install: New Bosch machine (connect power/water/drain) • Disposal: Must take the old dishwasher away with you Site & Access Details: • Location: Rothschild Avenue, Rosebery, NSW 2018 • Parking: Street parking typically available directly outside during the day • Apartment is on Level 5 (Lift access available) • Machine is already inside the apartment Requirements: • Must have own tools to drill/mount the cabinet panel • Must have a trolley/dolly to remove the old machine via the lift