Hire trusted appliance installation services in NSW

I have a heavy electric reclining chair with a flat aluminium/steel star base (no existing wheels, no screw holes). I want to make it mobile on tiled floors, using proper wheels with locks, while not drilling or damaging the aluminium base. Scope of work: Inspect the chair base (flat aluminium star legs) Supply suitable wheels + mounting solution (e.g. clamp-on adapters, brackets, or another safe non-drill method) Install lockable caster wheels (minimum 2 with brakes) Ensure the chair is stable and safe when locked, including when reclining Test movement and locking before completion Important notes: Chair is very heavy (electric motors inside) No drilling into the aluminium star base Wheels must be rated for high load and suitable for indoor tiled floors Low-profile solution preferred (minimal height increase)

We have purchased a new rangehood. The existing one needs to come down. There's already a live power point and ventilation in the wall. New holes may be required.

Under cupboard rangehood needs a ducting installed to connect it to send air outside It is a simple flat tin roof Task Supply ducting, flue, roof mount fittings and sealants. Everything needed Kit $200 from bunnings. Install from rangehood. Cut shelf and top of cupboard for ducting to pass through. Cut ceiling (gyprock) and colour bond roof to feed ducting through. Install roof mount vent with waterproofing and protection needed. Install a cover around visible ducting above cupboard. Something simple. Matt White colour. Looking for a simple solution and install. OPen to suggestions Thanks! Photo included of roof space as a guide. Not taken in the same spot

My push/start throttle has been damaged and needs to be replaced with new throttle. I have the new one. You will need to remove old throttle . Prefer someone who has experience completing this task.

Install 60 CM rangehood in my kitchen It is a recirculating range hood, so all that is required is the installation itself. Old one already uninstalled Easy parking available

Need 3 handheld bidets installed

I am needing my stove top replaced as it has smashed. I believe it is a standard sized 60cm replacement. Measurements are included but not exact due to the steel framing. I will purchase the stove top once I know which one is appropriate.

Swap out my old slide out rangehood (60cm) to a new one (Bosch DFM064W54A). Range hood purchased.

Installation of force usa c10 all in one

Remove old rangehood and install new one. Existing rangehood is a 90cm pullout Omega. New rangehood is a 90cm fixed Omega https://www.appliancecentral.com.au/orf90xl-omega-90-cm-stainless-steel-fixed-rangehood?language=en&currency=AUD&gad_source=1&gad_campaignid=11267016658&gclid=Cj0KCQiAprLLBhCMARIsAEDhdPe-OOj4ynlTxLLPbhMcawY6uVQIhYdzB2ua4L6w2I9vtTMfK2YIBDUaAiHCEALw_wcB

Oven Installation – Licensed Electrician Required Looking for a licensed electrician to install a new Westinghouse oven. Old oven has already been removed Existing power wires are taped and ready for connection Standard oven installation – nothing fancy Would like the job done Thursday if possible Please send through any questions or let me know what you need to quote accurately. Thanks!

I need an experienced installer to swap over a fully integrated dishwasher in an apartment. The Job: • Disconnect & Remove: Old Smeg fully integrated dishwasher • Cabinet Panel Swap (CRUCIAL STEP): Remove the matching wooden cabinet door from the old machine and install it onto the new Bosch Series 6 • Install: New Bosch machine (connect power/water/drain) • Disposal: Must take the old dishwasher away with you Site & Access Details: • Location: Rothschild Avenue, Rosebery, NSW 2018 • Parking: Street parking typically available directly outside during the day • Apartment is on Level 5 (Lift access available) • Machine is already inside the apartment Requirements: • Must have own tools to drill/mount the cabinet panel • Must have a trolley/dolly to remove the old machine via the lift

Install transfer fan between two rooms in roof cavity. Needs to be wired up to switch in room. Have all the gear for the job.

Uninstall and remove existing integrated dishwasher drawer and install new integrated dishwasher drawer (I already own the dishwasher, it just needs to be installed)

We just moved and need our dryer wall mounted onto the brick wall above our washing machine. 4.5kg front load dryer with wall bracket.

Install wall mounted vented dryer. Existing plugs in laundry wall currently from previous owner. Wall brackets included in dryer box. Will require reversing the control panel due to dryer needing to be hung upside down. Dryer model capable of doing so.

I’m looking for a licensed and insured electrician to disconnect and remove an old Miele 60cm oven and replace it with a new Miele 60 cm electric oven. Must be qualified as this work required safe and experienced installation please, and I will need proof of license for our insurance purposes

Westinghouse dishwasher needs to be installed

Replace old Bellini 60cm Slideout rangehood with new Westinghouse 60cm Slideout Recirculating with charcoal filter.

Require a licenced electrician to remove and install like for like Smeg oven and rangehood