Find professional window and door services in Melbourne Eastern Suburbs

Double front door not completely fixed when closed. It is probably due to the fixed side upper and lower latches a bit loose (not fully secured due to poor workmanship). Need to make it completely solid so the opening side doesn't make any noise when the door handle is shaken.

Door Hinges Repair - See photo

Door on outdoor yurt currently sticks part way shut, needs either frame to be re aligned, hinges reset or frame and door sanded. Also attach new lock we will supply.

Replace the door with the secondhand door with handle and deadbolt. The old door is 203x81.5x3.5cm The new door (second hand door) is 201*805*40 mm I will supply door and handle and hinges.

Hi, I need two small holes repaired in two internal wooden doors. I’m looking for a simple, tidy repair. It doesn’t need to be perfect, but the holes should be filled and the finish should blend reasonably well with the existing doors.

Outdoor grout repair and caulking

Have the door replaced with a new one and install the handle and digital lock. I will supply the material. The old door size 203x81.5x3.5cm The new door size 2040*820*40 mm

Brand new bedroom door installation

Replace (supply & install) my torn sliding door flyscreen mesh (around 200 X 112)

Hi , we need small removal of 3-4 pillows bagged , a sheet . See pics . Need 4 front windows hosed , dry naturally, light globe installed . Don't have ladder . Have globe and hose . Not a lot to do . Please no ridiculous offers .

need someone to repair/realign a pivot glass shower door. The door has gone slightly out of alignment, causing the two glass edges to rub against each other from about halfway down. There is no noticeable vertical movement in the pivots.

Remove small sign (60x20cm) above doorway on King Street, Melbourne via ladder and drop off to either Collins Street or St Kilda when available.

Doors need trimming and or buffing due to new flooring done

I have an internal painted door that previously had a hole in it. The hole was repaired using wood filler/wood dust, but the repair was not finished properly and the patched area is still visible. I’m looking for an experienced handyman/painter to professionally redo/finish the repair so that the surface is smooth, level and blends with the rest of the door as closely as possible, with no obvious patch marks. The existing repair may need to be sanded back, levelled/re-filled as required, primed and painted. I’m happy for the whole face of the door to be repainted if that will give a cleaner and more consistent finish, rather than just touching up the repaired area. Please include all materials, filler, primer and paint required in your offer. Photos attached showing the current condition. The main priority is the quality of the finish. I want the repaired area to be difficult to identify once completed. Please let me know whether you recommend repairing/refinishing the existing patch or another approach to achieve the best result.

My apartment's timber entry door is rubbing against the metal door frame at the top corner, leaving scuff marks on the frame. I'd like it diagnosed and fixed so the door swings and closes freely without contact. What I need: Inspect why the door is rubbing (loose or sagging hinges, door closer adjustment, frame out of square, or door swelling) Fix the cause, e.g. tighten or shim the hinges, adjust the door closer, or adjust the door/frame as needed. Only plane or trim the door if there's no better fix. Make sure the door latches and closes properly afterwards

This morning tried to open garage door and didn’t open and saw the springs on floor Need a professional/ expert to secure the springs and get it relyable working Springs only came off on one side - other side still connected

Just need a servicing on garage door

Garage door will not close. Gets 1/3 of the way down, beeps then opens up again. It cannot be locked. We manually close it, place a pot plant to hold the door in the down position. Looking for someone to repair it.