Book a professional espresso machine repair service in London

I need someone to diagnose and repair a Sage Bambino Plus coffee machine at my home in N1 2QE. The machine powers on normally and all the lights appear normal, but when I press either the single or double espresso button, absolutely nothing happens — no pump, no water and no sound. I suspect there may be an issue with the water tank connection/sensor, but I'm not certain. Home visit required. Ideally someone with experience repairing Sage/Breville espresso machines. Please quote for labour/call-out separately from any parts, and let me know your experience with Sage machines.

I think my machine (sage oracle) has a faulty solenoid valve - I have conducted an extensive descale but am still having issues with no success. Coffee extraction is limited / poor and there is a loud noise being produced. Is this something you can help with?

I think my machine (sage oracle) has a faulty solenoid valve - I have conducted an extensive descale but am still having issues with no success. Coffee extraction is limited / poor and there is a loud noise being produced. Is this something you can help with?

Loud rattling sound of sage coffee machine barista touch impress

the steam isn’t working. I am assuming the pump is somehow compromised because of the kind of noise it sometimes makes.

My safe coffee machine is broke I did not use a water filter so it’s got clogged with scale and even a deep descale does not clear it, I’ve tried using stronger descales and after a few uses it goes back to not working By not working it means it only ever pours for 9 seconds

Our coffee machine's steam wand's power was slowly slowly decreasing and it got harder to steam the milk. Thinking it might come from scaling inside the machine, I performed a descale cycle. After that, the machine stopped working at all. It turns on and off, the buttons are working, but no water comes out when pressing the coffee button. It does not work neither when trying the hot water or the steam wand. The machine makes the same noise than usual when doing those actions, with the pump also working, but still no water , or very little water comes out. We have waited weeks as we thought it might come from an 'air lock' but it still does not work.

The machine was working immediately before the cleaning/descaling (“clear”) process. A cleaning process was then carried out. Following that process, the machine lost pressure. The loss of pressure affects both coffee extraction and milk frothing, suggesting the issue may be with a shared pressure/steam/water system, rather than simply a problem with the coffee side. The machine is now effectively unusable for its intended purpose. The timing suggests a possible connection to the cleaning process, although that doesn't by itself establish the exact cause.

Smeg coffee machine isn’t working

Job Description: Seeking an experienced commercial espresso machine engineer/technician to service a 2-group espresso machine and repair/replace the group head shower plates. Machine Specification: Brand & Model: Astoria Perla (Mod. SAE/2-AI) Type: 2-Group Automatic Commercial Espresso Machine Year: 2016 Power Rating: 240V / 2700W Scope of Work: Shower Plate Repair/Replacement: Inspect, clean, and fix/replace the group head shower screens/plates and mounting screws across both group heads. Group Head Maintenance: Inspect and replace group gaskets/rubber seals as needed to prevent leaking around the portafilters. General Health Check: Test boiler pressure, steam wands, hot water delivery, and volumetric keypad functionality. Leak Inspection: Check internal/external hoses and drainage for blockages or leaks. Requirements: Proven experience servicing commercial espresso machines (familiarity with Astoria / CMA machines preferred). Must bring standard diagnostic tools and common replacement parts (shower screens, gaskets, group screws).

Infuser stuck of my bean to cup machine. And no drain is performed.

The grinder isn't grinding properly, as well as the espresso head of the machine where the water comes out. There's not enough pressure that pours through the coffee.

Fix my DeLonghi Magnifica Evo Next Bean-To-Cup Coffee Machine ECAM310.80 SB Problem - Soap may have got into the system and created bubbles inside stuck somewhere, could be the flow meter, water pump etc. Currently stuck in the descaling cycle when I start the machine Situation I used dishwashing soap to clean the water tank. It was ok for a day after that when I start the machine, it makes a noise when it pumps water and it says something is wrong refer to manual. After that I took the water filter out, it somehow was able to start without issue. Then I used the rinse function twice and was ok. After that I thought it's best to descale it just in case it was limescale built up. I got to step 6 of the descaling. It was interrupted by the message "im doing a little cleaning". Then it pauses for a few seconds and then it says something is wrong refer to manual. Now when I start the machine, it says the last descaling cycle was interrupted so I can only click ok to let it do descaling from step 6. It Then says the same thing "im doing a little cleaning", then pause, then it says something is wrong. So stuck in descaling cycle now. I tried purging water out from the water tank but didnt solve the problem Task - Will likely need to open the hot water and let it flow till the circuit inside fills up. If this doesn’t work then may need to take the unit apart and find the blockage and release it.

My Sage coffee machine is not brewing the coffee anymore. The milk froth pump is working, but the water is not pumped for the coffee.

Sage barista express coffee machine is broken & needs fixing. Turns on but doesn’t make the usual sound and water doesn’t come out

The coffee machine switches on and grinds beans with no issue. When you try to pull a shot by pressing either the one cup or two cup buttons the machine causes the fuse to trip (in the main fuse box).

repair for coffee machine - Barista sage - not in warranty - ER05

This coffee machine needs repairing. I believe the heating element has failed, so I’m looking for someone who can diagnose and repair it and, ideally, bring the required spare part with them.

The water isn’t being pulled through so making coffee cuts out after 5 secs. Trying to do a ‘flush’ and tried this several times, keeps cutting out after 5 secs. Removed the water filter and still not taking water do the tank.