Hire a trusted appliance repair service in Surrey

Norfolk Track s25i treadmill. Issues with speed. It increases to high speeds when I don’t want it to.

The steam wand or hot water outlet is not getting any flow, all the water is coming from the main outlet irrespective of the dial position.

Sage Barista Express broken - no water pressure in either wand or main compartment

Disherwasher has stopped working, unsure if can be fixed?

De’longhi electra coffee machine won’t deliver water to the cup

Water doesn't come out of the group head

Drainage issue with Bosch washing machine

Indesit washing machine not working and blinking. It’s PCB might be problem. Also we have integrated fridge whose door is getting broken. 2 out of 3 hinges are broken and needs replacement.

The curved treadmill is not working properly. The belt feels like it is on a very high resistance. It is turning but with a lot of effort

The elliptical is a home elliptical and 2 things are an issue. 1) loose glide on one side of foot pedal 2) clunking sound one the rotation

The cable was slightly wrapped round the whisk. The power button was pushed lightly for a split second which has pulled the wire somewhere. It was plugged into a 110 box, I'm not sure if the cable can be changed so it can be plugged into the mains instead or if it has to be like for like. I've opened up the plug end and couldn't see the problem but I'm absolutely useless with electrics.

We have a Nordictrack 2950 treadmill where the drive motor has stopped working. We have purchased the following replacement parts from the manufacturer. Drive motor: 405537 Controller: 431637 Walking belt: 351356 We are looking for someone to replace these and service the machine at the same time.

Jammed bobbin with every use

Every time I try to use the milk jug it triggers a general alarm on my coffee machine

Proform endurance m7 treadmill trips power when switching on. Belt moves slightly before power trips. Board problem?

I have blead my radiators but three still don’t work so need someone to check and fix them

Repair dosmetic coffee machine . 2 years old . New £575 Can drop off or come to home

The treadmill is reducing speed on its own to zero - looks like a sensor issue.

NordicTrack treadmill isn’t working, when the button to switch it on is pressed it turns over before tripping.

Coffee machine: De’Longhi Magnifica EVO (ECAM series) Age: approx. 3 years Problem description The coffee machine has developed multiple internal water leaks. Water mixed with coffee residues is accumulating inside the machine and in the coffee grounds container, which should normally remain almost dry. There are visible water traces and leakage marks under and around the brew unit, indicating that water is not being correctly channelled to the drip tray and is instead leaking inside the machine. The issue appeared gradually and has become worse over time. Observed symptoms Water and coffee sludge collecting in the used coffee grounds container Water leaking inside the machine body Moisture and residue around the brew unit area No external leaks from the water tank itself Suspected causes Based on the symptoms, the most likely causes are: Worn or hardened seals (O-rings) on the brew unit piston Possible leakage from the drain valve / upper piston assembly Potential deterioration or loose connection of internal silicone hoses Given the age of the machine, seal degradation is considered the primary cause.