Find a local Tasker to set up your router modem near you

Connect 2 tills with routers and bar and kitchen printers

Looking to replace virgin router with Ubiquiti or similar and install access points in a few places. Might need to run another Ethernet / cat6 cable. Need advice and installation aupport

I have a new router which needs installing amd need need to reset all my devices to new password (tv doorbell etc)

Small wireless router with connection detached from jack

Provide and fix a cat 5e Ethernet cable from the openreach entry point and router at the front of the house through to the back office room. Options include going though cavity walls, into the loft and down, over the roof and down and into the house at the back etc. I don’t want lots of cable visible. Can be combined with other task posted on electric socket work Pics now attached… take cable from openreach box, follow ( go on top of) the picture rail , go thru external wall and renter house through preexisting hole with a cable in it that is now redundant, estimate 20-25m

I have a replacement router and I can'tplug it in

Linksys router WRT3200acm. Have had since 2021 and worked well. Provided second internet line using vpn. Need help figuring out why not working and then installing new one or fixing

go to argos to collect a 4g router + unlimited data sim. Then go set it up at the property.

2 Router Elu 96e and a 96 both need clean /service. Set of new brushes. Both are working. But have no been serviced for many years.( from new)

Swap virgin router mount back in same place in plant room ensure all cables connected and test all working

New router with SIM card slot. Insert working SIM card. When trying to configure APN the password box becomes auto filled with (dots). protected password. This box should be left blank. i have tried removing this but each time the new APN profile is saved the dots reappear and the APN is blocked. I have tried a different device logging into the router settings page but the result is the same

I'm in the process of upgrading my network switch and require assistance with installing the new unit. The primary challenge is that the screw placement on the new switch is different from the old one, preventing a direct swap. Would anyone be able to help me with this?

There is poor connection in our building. We need a router lifted out of the current room and moved to the office downstairs, to ensure that there is stronger connection. We need someone who is experienced in router positioning and improving connectivity.

Hi, we are trying to use our own router (TP-Link Archer) with our Plusnet full fibre connection, but can’t get it to work. We’ve spent hours on this and been on the phone with both Plusnet and TP-Link support but have not been successful so far. The Archer router is supposed to be easy to install … now we are looking for someone to come and get it up and running. We are in Weybridge.

Rebooking task between David and Rezwan

Go to a building a comercial building in E32TB, find your way to the data cabinet (I will share directions + access codes over phone), plug a SFP module into a router, wait for me to confirm it's come online and that's it. It should be done in 10 mins but allow up to 60 mins in case anything doesn't go to plan.

I need a router to be added to the end of a cst 5 cable to extend the range of my home wifi. I also want it configured as a guest network to give some control over what people can view through our connection.

Ex has modified router hardware. I want to restore to basic

Router/ WiFi details reset Wifi extender reset and connectivity (TP LINK)

As discussed, this would be task 1.