Book a professional espresso machine repair service in London

De'Longhi Authentica ETAM 29.510.SB is 'dead'. With main power on, the 'standby' button can't be turned on. The 'water drip' and traingular 'warning' red sign is on on the panel. The water tank is full and the float can bob up and down freely. I'm not sure if it's the power board failure.

The inside console that drops used grounds into the ground deposit has become stuck. I need someone with experience repairing smeg coffee machines to take a look.

Machine trips electrical circuit when pressing the button to pull a coffee. Have read this is likely internal leak affecting O rings and/or solenoid replacement.

My coffee machine is not working - it very slowly pours coffee, but the wand and boiling water are fully broken. I think it might be a motor/pump issue. It probably needs a full clean inside too.

My rocket appartamento coffee machine leaks water from the pressure overload valve and the boiler pressure when you brew espresso goes up to 3 bar. The steam pressure from the wand fluctuates a lot and drips water.

Service for commercial coffee machine with service report, and disconnect the machine from water and power supply after the service.

We have a sage barista touch machine in good condition. Problem is we have a water tank that has algae in it that's difficult to clean, and it keeps coming back, despite there being no sunlight. It might require a deep clean as algae might be in the pipes.

Barrista Express Coffee Machine - pressure isn't engaging properly to filter the coffee through (comes through quite watery) -milk frother doesn't work at all, it's not producing any pressure when you turn it on

My beloved coffee machine (Delonghi Magnifica S bean-to-cup, ECAM22.110.B) has developed a problem. The grinder collects beans but I can then hear it struggle to grind. It strains to a halt and then gives up, with the error lights flashing. It does not dispense any coffee. Please can someone quote me for a repair? Delonghi want a ridiculous amount to service it but might as well just buy a new one at that price! Would rather see if someone can repair it.

My coffee machine won’t start. It’s a bodum espresso machine

Looking for an experienced coffee machine technician to service and repair my malfunctioning Jura Ena 8 domestic coffee machine. The machine is currently not functioning properly and likely needs the brewing unit repaired or replaced. What I need: - Full diagnostic assessment of the machine - Professional servicing and cleaning - Repair or replacement of the brewing unit (if required) - Testing to ensure proper functionality - Brief explanation of work completed Machine Details: - Model: Jura Ena 8 - Age: 3 years - Issue: Malfunctioning, unusual grinding noises, not pouring coffee, occasional Error 8, suspected brewing unit problems Location & Collection: - Greenwich, SE10 - Collection and return only from/to my address - Machine will be ready for pickup at agreed time - Please bring any necessary tools/equipment Budget: £150 all-inclusive Ideal Tasker: - Experience with Jura coffee machines preferred - Professional coffee machine repair background - Can provide references or previous work examples - Available within the next 1-2 weeks Please include your experience with Jura machines and estimated timeframe when applying.

Coffee Machine: Simonelli Musica Water was spilled into the machine when refilling the water tank. It caused the RCD tripping. And after 48 hours, when the machine is turned on, Rcd is tripped again.

my e1 prima coffee machine flashes a5 when turned on and I'm not sure how to fix it.

My sage oracle touch bean to cup is not heating to temperature. It gets to around 70 degrees and stops

My machine is making a chugging sound and no water is coming out of the group head. I think there is a blockage due to hard water in the area.

Coffe machine is tripping the main board. It appears to have an electrical fault.

We recently bought a second hand Breville coffee machine online. Unfortunately the water is not pulling through to the group head or the steam wand. The machine turns on and will heat up, but makes a low whirring noise when the cup button is pressed. We have tried to descale the machine but this does not work either. Please help!

Our coffee machine turns on but appears stuck with no pour.

Our Sage Barista Pro has stopped working. First the water was only coming through for a few seconds at a time from the main head, now it has stopped coming through at all. ?problem with the pump, ?blockage.

Machine keeps pausing itself, potential issue with pump. Sage barista touch