Hire a reliable appliance service in Berkshire

I have the night storage heaters (3) , none of them are working. Please advise. Thank you

Life Fitness T3 home treadmill not working - tried cleaning, lubrication but fails to work at high speeds. Fine below 4kmph

Kitchen Hob model Whirlpool General 2000+ model. Ignition switch is stuck.

None of my room heaters are working. . They are night storage heaters .

I removed this bidet attachment to clear the limescale since then I cannot get it back on

replace primeline exhauster fan PEF4020

Gas burner keeps lighting even after turned on

Hi, I’ve got a DFS electric corner recliner sofa, approximately 3 years old, with one recliner completely inoperative. It’s fitted with a Kaidi HK5002 28V actuator and side-mounted controls with USB charging. I’ve tested the power supply against the working recliner, checked and reseated the main wiring connector, and inspected the visible wiring. There is no movement, motor noise or USB power. Do you offer home visits to Arborfield Green, Reading, to diagnose and repair this type of electrical recliner fault? Could you advise your call-out and diagnostic charges?

Tumble dryer not working and has an error message

Treadmill is running faster than the speed indicates

The moment the washing machine is switched on, it makes a brief hum noise and then the drum doesn't spin/rotate. I have already checked the drain filter and all looks good there.

Recliner sofa not working - 2 motors

4 Mower and power tool battery packs need standard rechargeable batteries replaced

I have an electrical socket for 1 plug that also turns the hob top on/off that is making a crackling noise

Repair 4 battery packs for lawnmower and power tools. ALSO optional repair of escooter.

Hi, I’m in Egham and have a Schwinn treadmill showing an E6 error. It won’t start. Do you repair Schwinn treadmills, and could you give me an estimate for the call-out and diagnosis before booking? Thank you.

Speed fluctuates when it shouldn’t, the running machine is relatively new and well maintained. After 30 min the speed on the display drops even though the actual speed is maintained. It then comes to a sudden stop. It could be a speed sensor issue.

Need qualified electrician to connect a new electric cooker to the existing cooker circuit. The kitchen already has a red cooker isolation switch and a connection point behind the cooker. The new cooker is rated at approximately 12.9 kW, so I need someone to: * check the existing cooker circuit, cable and breaker are suitable * fit the correct cooker cable if required * hard-wire the cooker safely to the existing connection point * test the cooker is working correctly Please bring any cable/fittings needed.

Hi, I have a NordicTrack X22i treadmill that needs repair. I am based in Maidenhead. A repairer came about 2½ years ago and diagnosed a faulty control board. I purchased the replacement board, but he removed the old board and never returned to fit the new one. I now have both the old and new boards, with the old one already removed. I’m looking for someone to inspect the treadmill, fit the new board, and check whether there are any other faults. Could you please give me a quotation?

New free standing cooker, requires fixing into wall no plugs