Hire a trusted appliance repair service in Surrey

My speed dial on my running machine is staying on 0mph which is making the running machine think it’s not going anywhere which means the mileage isn’t going up

Sage coffee machine needs a service, water is not running because of limescale build up.

broken washing machine door seal so machine leaks when in use

Our Roborock hoover goes back to the dock and always pops out again so the dust bag or mops dont get cleaned.

The side door that slides out on my machine is jammed shut, in the picture it’s the black part on the right with the card reader on it, it normally slides towards you but is jammed

Lawn mower repair lawn mower starts but cuts out

Steam want and water dispenser are completely blocked. I have tried descaling but that has not fixed the issue.

Drive motor issue and potentially control board. Overheats on driver clicking noise and when doing like 8kph with me on it or any weight on it the control board starts to smell like burning but previously also seen smoke on driver side.

Norfolk Track s25i treadmill. Issues with speed. It increases to high speeds when I don’t want it to.

The steam wand or hot water outlet is not getting any flow, all the water is coming from the main outlet irrespective of the dial position.

Sage Barista Express broken - no water pressure in either wand or main compartment

Disherwasher has stopped working, unsure if can be fixed?

De’longhi electra coffee machine won’t deliver water to the cup

Water doesn't come out of the group head

Drainage issue with Bosch washing machine

Indesit washing machine not working and blinking. It’s PCB might be problem. Also we have integrated fridge whose door is getting broken. 2 out of 3 hinges are broken and needs replacement.

The curved treadmill is not working properly. The belt feels like it is on a very high resistance. It is turning but with a lot of effort

The elliptical is a home elliptical and 2 things are an issue. 1) loose glide on one side of foot pedal 2) clunking sound one the rotation

The cable was slightly wrapped round the whisk. The power button was pushed lightly for a split second which has pulled the wire somewhere. It was plugged into a 110 box, I'm not sure if the cable can be changed so it can be plugged into the mains instead or if it has to be like for like. I've opened up the plug end and couldn't see the problem but I'm absolutely useless with electrics.

We have a Nordictrack 2950 treadmill where the drive motor has stopped working. We have purchased the following replacement parts from the manufacturer. Drive motor: 405537 Controller: 431637 Walking belt: 351356 We are looking for someone to replace these and service the machine at the same time.