Find a backsplash tile installation professional in Sydney

The job is to remove the stubborn cement layer left in the wall after the kitchen splash back mosaic tiles ware removed long time ago. Use power chisel/grinder, sandpaper to remove the cement layer and make it smooth enough to paint/stick a board flat. Area - 17 feet long x 2 feet height (expect to remove the cement in the entire area, and it is not easy removable cement. It's quite stuck hard) No complaints later please. You will need power tools to do the job efficiently I believe. Work to be done in a working day between 9 - 5 PM. Parking will be provided in the building basement. - Due date: Before Friday, 10th Dec 2021

Old kitchen splashback to be removed and new splashback to be installed. New splashback is ~2-3sqm and of 150x150 loose tiles. - Due date: Flexible

Acrylic sheet is 1220mm X 3050mm X 4mm and needs to be cut into 3 bits for the installation in my kitchen. 1 will need a power point cutout. Cut on-site down in the garage as the sheet is too big to fit into the lift. Power is available in the garage. You will need the following tools: Straight Edge Carpenters Square Caulking gun Circular Saw - see below for blade specs Trestle Table or work bench Wet and dry sand papers Double Sided tape. Circular Saw specs: Blade Diameter (mm) 255-305 Number of teeth 80-100 Tooth Thickness (mm) 3-3.5 Clearance Angle 15-20 degrees Cutting Angle (Rake) -5 degrees Cutting Angle of Setting Band 2-3 degrees Blade Speed 3k-5k Surface Speed 3k-4k I can supply the following: Marker Tape Measure Drill Sanding Block Neutral Cure translucent silicone (x3 cartridges) Tile Spacers Full instructions for installation are available at: http://www.bellessi.com.au/download/Bellessi-InstallationInstructions-LR.pdf Please have a look at the installation instructions before making an offer on the job, Please see pictures of where it's to be installed below. Note; the sink tap is easily moved. I'll also be able to give you a hand on the day.

Tiler required for tiling white 15x15cm tiles to create a splashback for a laundry. Also 3 tiles required to be added/ replaced as per photos. We will provide tiles and grouting. See markups in red in photos to see job requirements.

Tile European laundry x 2 walls measuring: 550mm x 1250mm (0.7sqm) 550mm x 750mm (0.4sqm) Total 1.1sqm See photos. White subway tiles measuring 200mmx 100mm (beveled edges) supplied. Tile adhesive, charcoal grout and white tile trim required but not provided - we can purchase prior if you don't have this. Remove existing tiles (0.4sqm) and make good wall for new subway tiles.

5sqm of subway tiles for kitchen splashback

Looking for someone experienced and neat to tile a small kitchenette splashback wall. Area is ~1sqm (1620x620mm), plain gyprock wall behind. We will supply the tiles (see photo) - finger style on a sheet 295x294mm. Only one row (at the top) will require cutting. Quote should include adhesive, grout (Mapei Manhattan Grey or similar) and matching silicone. Job is 3 flights of stairs up from street level. No shoes or boots inside please.

splash back tiles either side of a galley kitchen with a small area filled in with villa board and the tiles are placed over that section as well - Due date: Before Sunday, 12th Dec 2021

Quote to replace the current kitchen splash-back. Remove and install new, open to options for material to be used. Need to be a licensed trade person. - Due date: Flexible

Need kitchen splashback tiled ASAP Trade must have all equipment and supply white colour grout, silicone etc. Already have tiles

Scope of works: Tiling of 2 kitchen walls (1600x560mm and 2300x580mm) between the benchtops and the cabinets in place. The walls have had the previous tiles removed, with some adhesive left on the drywall and some drywall damage (as per the photos). One wall has 2 double sockets and the other wall has a switch for the oven. The white ceramic tiles supplied are 600 X 300mm (we have 18 pieces). Start tiling from the benchtop up in a grid pattern (so that full tiles are at the bottom and the top row tiles are the ones cut). The rangehood is exactly 600mm wide and above the cooktop; one vertical row of tiles needs to align to both the rangehood and the cooktop, this row will determine the rest of the cuts required. Tasks to be performed: ♣ Protect kitchen benchtops and work area before you start ♣ Prepare the drywall (previous tiles have been removed, there’s some damage to the drywall and adhesive residue) ♣ Laying out tiles using adhesive ♣ Cutting tiles with special tools (There are 3 existing wall sockets that will require tile cutting) ♣ Ensuring that tiles are correctly spaced at 1.5mm and levelled ♣ Remove excess adhesive ♣ Peepare, apply and clean excess grout ♣ Clean and polish the tiles ♣ Apply the caulk/silicone ♣ Clean the work area. We will provide the tiles and pay for labour and parts (grout mix, tile adhesive, caulk/silicone, tile spacers). ♣ All quotes must indicate whether the price is GST exclusive or inclusive. ♣ Please list any exclusions in your quote.

Looking for a tiler to lay 50 x 200 size subway tiles (supplied by me) in a herringbone pattern for kitchen splash back - approximately 2730 x 650 mm rectangular space. First attachment is an example of what I'm after. Second attachment is my kitchen. I'm only looking to tile the back wall above the stove.

U shaped kitchen. 3 walls about 500 mm in height. I have bought kit kat mosaic tiles in 300x300mm sheets to be tiled vertically. Splashback area approximately 4 sq. m

Hello, we have a 3 sqm size splashback that needs tiling. The work also includes a bit of windowsills around the sink. We’ve got the tiles ready.

The gyprock behind splashback got removed and needs replacement/ repair. - Due date: Before Thursday, 25th Nov 2021

I have a small flatpack kitchen from Bunnings that needs to be installed. Benchtop is 1.5 meters. Teo cabinets underneath, sink and hotwater connected. The splashback will also need to be tiled. Area 2 meters squared. The wall still has so old plaster from the old tiles and may need a repair before tiling because some of the render has chipped away during removal of the old tiles. I will supply the tiles, adhesive and grout. Not sure what the wall repair will need. Possibly some render?

Looking for an experienced tiler to replace exisiting tile splash back with new tiles. Tiles are ceramic we have the grout already also. Located in Beacon Hill on Sydneys Northern beaches.

I have an alcove in a cabinet that I would like to put smoky mirror backsplash around on all sides (5 in total). Also need a marble or stone shelf on the base of the alcove. Can be marble look if suitable. Can measure and quote anytime, I'd ideally like this done next week Specific Job Details: Schedule: Complete before April 13 Site Visit: Anytime

Supply and install glass splash back with cutouts for 2 sockets and stove switch and window. These are roughly the measurements 1st section 573 x 2060; 2nd section 573 x 1360; 3rd section 573 x 647. Panel around the window should be one piece. No cut seams under the window.

We would like help to prep, grout and seal a small kitchen splashback in white subway tiles? Remove a small mirror in one section of the area but remaining area is freshly painted. The area is around 2sqm and we would supply white ceramic subway tiles 200x100.