Find experienced local roofers in Castle Hill NSW

Gutter is rusted out in places. Strip shown in video needs to be replaced.

Need help with installing drip edge/flashing. Supply and install aprox 6 meters of custom parapet capping/flashing with 50mm drip edge to throw the water clear of the walls

We have a large shrub/tree growing directly against the front verandah of our home. The shrub is currently: • Touching the gutter and roofline • Touching verandah posts and beams • Very dense internally We need it professionally pruned back to: • Create 300–500mm clearance from roof, gutters and verandah • Remove all branches touching the house • Thin out internal density for airflow • Lift the lower canopy off the ground • Remove all green waste This is primarily for pest prevention (reduce cockroaches/lizards accessing the house). Access is straightforward at the front of the property. Please bring: • Ladder suitable for single-storey roofline • Hedge trimmer / pruning equipment • Green waste removal capability Not looking for full tree removal — just proper pruning and clearance.

Removal for heating system for the pool from the roof

Cleaning single level house gutters and make sure downpipes are not blocked. Clean leaves, dirts and debris from gutter and roof valley. Flush gutter and downpipes to ensure drainage. Easy access. All gutters and lengths shown in photo.

Require someone experienced in installing and removing Christmas lights. Need existing lights removed from our roof and a quote on reinstalling them (plus other lights) when next needed in Christmas 2026.

We have had a possum fall from the ceiling in the outdoor passage area. The possum then reentered the hole. We have been hearing possum activity in the ceiling for a few months now but this is the first time we have seen it. Can we please get someone to come and remove the possum and then proof/seal the areas.

Clean out gutters on two storey house

Need roof and gutter cleaning

Where the gutter joins together there is a small gap and will require replacing

My roof whirlybird is making noise due to a loose mount / vibration (suspect). I need an experienced handyman or roofer to: • Inspect the whirlybird base and flashing • Tighten or replace mounting screws • Secure the unit firmly to the roof structure • Add rubber/neoprene washers if needed to reduce vibration • Reseal screw points and flashing edges (without blocking airflow) • Test to ensure no rattling or movement Outcome expected: Whirlybird is firmly mounted, no rattling or vibration noise in wind. Experience required: Roofing or whirlybird installation/repair experience preferred.

Rotting in timber needs to be replaced in 2 spots as pictured. Scaffolding will be supplied. Please quote for labour and materials only.

I have 62 solar panels on 2 storey house and 30 glass pool panels to clean

3m x 3m Gable Roof Shed Install Garden shed in back yard. I have purchased the shed. Need a price to install and also a price to help level out the pavers i have laid. 3.2M by 3.2M each paver is 400MM by 400MM, I have all the materials, sand, rocks, cement to fill the gaps, just need them to sit perfectly level prior to assembling the shed on top.

I need help with gutter cleaning of a single storey house.

Inspect roof area above the eaves to identify source of leak Check tiles/metal sheets, flashing, capping, and gutters for cracks, gaps, or damage Seal any visible gaps or entry points causing the leak Replace broken/loose tiles or damaged sections (if required) Apply waterproof sealant around affected eaves area Ensure gutters/downpipes are clear for proper water flow Provide photos before and after the repair

Gutter construction has come loose Needs to be reconnected

2 story house bush setting with 2 small sheds

Note: I am updating this task, the tree branch does not have to be disposed, only cut down. cut tree branch overhanging on the roof. castle hill

I have purchased a 4-pack security camera system which is wireless and has its own solar panels for each one. I need someone with long enough ladder to install these in 1 to 2 trees and eave locations around perimeter of my house so that I can get full view of what is happening around my place. I will handle the technical programming side of things. Just need someone handy to go up tall ladder, I have small electrician's style V ladder that is not tall enough for trees.