Find a professional privacy screen installer in NSW

Attaching a shade cloth to glass balustrade balcony. Currently has bamboo slat screening from Bunnings. This needs to be removed, then shade cloth attached and then bamboo re attached on top. Bamboo to be cut shorter height and attach it slightly off the ground. I have the shade cloth, cable ties and metal wiring. It is a street level apartment with its own street entrance so easy access and parking right outside. Shade cloth is 5m long per piece and bamboo is 3 metres long and has two rows together. Balustrade is 15m long all together in separate sections and a 1m high. Bamboo is 1.5m and want it cutting to 1.3. Thanks!

Looking for budget friendly privacy for pergola. Need screen or blinds for two sides and a small one on the fence side. Supply and install or I can buy from Bunnings.

A 4m wide / 1.8m privacy screen to be erected. Needs assembly and drilling (anchored) into top of the concrete wall firmly. Parts all provided.

Sand and Paint Timber Deck and both privacy screens in courtyard . Deck to be painted a light grey colour and privacy screen a beige crème colour . Privacy Screen approx 2m high. For courtyard dimensions see photos attached .

The wooden privacy screen is about the level of a second story home. Task, to secure the battens that have come loose on the top, as per picture. It needs the use of high ladders and probably nail gun to secure the one loose batten as per picture. Also, any others that need securing once up there. It is near a pool area.

Install and secure 3 x Privacy Screens around Wheelie Bins. It's on grass, I'm guessing you may need to cement them in and get levels right. Slight slope on grass. Each screen is approx 1m wide x 1.5m high. Pic attached.

Install privacy screen in master bedroom Install privacy screen on front balcony

I need a privacy screen installed on my small front porch it's 180cm-120cm. Easy job for a handy person, 1 level story brick home,I also need my ring doorbell frame put up into brick, no wires or electronics just handyman work, and need a security camera installed no wires or setting up just need it screwed into the outside roof single story home .. handyman to supply own tools and small hardware that would be needed screws,a few metal brackets for decor/privacy screen. Easy job probably 2 hours maximum

need to put privacy screen on one side of balcony. 170cm height. See diagram for details. We already have glass right now. Open to suggestions in terms of material. Goal is to be compliment with council

We have 2 privacy screens, attached to floor and wall outside our gym and also attached together to hide our bins. they need to be replaced. the current screens we have are: https://www.bunnings.com.au/latticemakers-1800-x-900mm-louvre-timber-screen_p0576669 but we would like to replace with these https://www.bunnings.com.au/jack-matrix-1800-x-900mm-charcoal-lush-screen-panel_p0627806 as the wood is falling apart after only 12 months of weathering. would need to purchase screens + collect, install with own tools + dispose of the old screens. please include all costs in quote inclding supplies, collection + disposal etc

I need a privacy screen installed on a fenceline between my property and my neighbour's property. The frame is already installed with bamboo screening but it needs replacing with lattice or timber slats.

I want 5 privacy screens erected into concrete pavers as seen in pictures.

Cut fixture to size and secure to the black privacy screens, fixing it to the brick wall starting from the right brick post and working downward. Use a hammer drill with appropriate drill bits and fasteners/bolts/screws.

Looking for an experienced handyman/tradie to install 4 outdoor privacy screens in my backyard/deck area. The privacy screens ( each 2400 by 1200 mm) have already been delivered to site. The job includes: - Purchasing required materials from nearest Bunnings Warehouse (Do not include cost of material in quote) - Transporting materials to site - Installing suitable posts into the ground securely - Attaching and aligning 4 privacy screens to the posts - Ensuring installation is sturdy, level, and neat Materials likely required include: Aluminum Posts suitable for outdoor installation Concrete/post mix Brackets, screws, and fixing hardware and Any other required installation materials.

Need to install aluminium batten privacy screen in balcony of a newly build duplex ( both side ). Each side will have around 20-25 battens. The bottom part can be screwed to brick and top to frame. All battens are available at the site including accessories needed to install. Sample photo of balcony attached I have highlighted where i want the battens. I am putting 50$ as a nominal amount. But please mentioned your estimate in the comment section. I would prefer if you can do this task this week or in the week after.

Need an IKEA Storage box chest and privacy screen built, all in box and instructions supplied please. https://www.ikea.com/au/en/p/naemmaroe-storage-box-and-privacy-screen-outdoor-light-brown-stained-s69492745/

Install a retractable privacy screen needs to be bolted into cement and brick wall , attached a photos

I have 2 hoselink hoses that need mounting on a brick wall. I also need 3 privacy screens to be mounted onto the deck. All fixtures available for both jobs.

I moved into a new apartment (rental) and there is a shared balcony between the 2 bedrooms. I want to put a freestanding outdoor privacy screen in the middle of the balcony to split it into 2 and isolate the bedrooms that way for privacy. I am looking for someone to get and install this. As it is a rental, I do not want any drilling into the wall, hence why choosing a simple freestanding outdoor privacy screen Width from wall to balcony rail is 65-66 cm Height of balcony rail is 107 cm Ideally I want the freestanding outdoor privacy screen to go to around 170 cm So height 150-170 cm, width around balcony width It can be purchased or made, i dont mind. Whatever is easier

Looking for a handyperson to supply and install privacy screens. To receive our full occupational certificate and as per compliance guidelines, we require privacy screens installed on our rear brick balcony. The total height from floor to screen to be 1.7metres so screens to be installed just on top of the brick balcony on both sides. See attached photos. Approximate Measurements: North facing side 398cm total width East facing side 296cm total width