Find professional kitchen drawer repair in NSW

Need help fixing a kitchen drawer with runners. See pics.

Our carcasses are mostly already built but the door/drawer fronts plus the microwave box arrived separately so we need them installed. It is a single run of cabinets (approx 2.3m long) with a mix of drawers and cupboard doors. Image attached for reference.

Kitchen drawer base to be repaired or added (2 drawers) + 1 drawer front to be sealed.

Need someone to make one of my missing kitchen drawers. Multitech brand No original draw front. But got the other one from my friend same size but white colour. If you can change to the same colour will be perfect.

Few of my front drawer panels have cracked so need them replaced for the entire column of drawers (see image below)

Fix three kitchen drawers 2 have the cupboard face come off, one is misaligned.

Title: Fix Kitchen Drawers & Sliding Wardrobe Doors Looking for an experienced handyman to repair a few issues at my home. Jobs required: * Repair 2–3 large kitchen drawers that are not operating properly (likely an issue with the drawer runners/slides or alignment). Please bring your own tools and any common hardware that may be required. If replacement parts are needed, I’m happy to reimburse the cost with a receipt. Ideally looking for someone with experience in cabinetry Please include: * Your experience with similar repairs. * Your availability. * A quote (or estimated labour cost, including parts if required)

Need handyman or woman to help fix kitchen drawer. The drawer has refused to close

Hello, We are looking to have a small utensil drawer installed in our kitchen in Meadowbank (Ryde area). The drawer would sit directly above our small microwave oven, inside the current microwave enclosure. The new drawer cutlery drawer would be done in the style to match the existing drawers. As part of the job, the facia around the microwave oven enclosure would need to be removed as it clashes. Additionally, the power point inside the microwave enclosure, may need to be moved downwards by about 150mm. I have supplied photos, and a concept sketch of the proposed cutlery drawer. We would like to have someone come out and visit us on site, and measure and quote for the design. We are looking to have the job done in the next few months. We have in mind a budget of somewhere in the order of $1, 000 to $1,500 for this task. Regards, John Drake.

Looking for an experienced handyman to help with a few household maintenance jobs: Bathroom: * Remove and reinstall/replace 2 towel rails and 3 toilet roll holders (may need repositioning or securing properly) * Realign and adjust shelves inside an under-sink cabinet so they sit properly and function well Kitchen: * Repair or reattach 1 kitchen drawer that has come off its runners/rails

fix the kitchen sliding drawer, kitchen sink & need silicone around our bathroom vanity

Repair wood kitchen drawer

2 worn hardwood runners need replacing inside the carcass of the kitchen cabinet drawers

Kitchen drawer rails loose

I have some sliding drawers that have broken attachments (to their slides) and a couple of cupboard doors that also have broken or missing spring attachments. I am not sure what these things cost, so budget is a guess.

Need a fix for my 3 kitchen drawers. They are bit misaligned and loose. I tried to apply a fix but that did not help. 1 photo is with the fix that I applied & the other photo is a good part. Any materials will be paid seperately

My kitchen door seems to have sprung out in the middle. I suspect that’s a very simple fix but it might require dismantling the drawer and putting the front back on

The current gap open at 410mm so I can not upgrade the drawer slide to soft closing due to I need to narrow the drawer to allow thicker tracking system. Can you build new kitchen drawer to be narrower, re-use drawer face and install soft closing track. You can quote to do one drawer. If works, I have another 7 x drawer for you. Given: Cabinet internal opening: 410 mm 
Drawer slides from Bunnings warehouse Goliath Soft Close Drawer Slide Pair - 450mm is 45 mm per side. Total space taken by slides = 45 × 2 = 90 mm Drawer outer width required = 410 − 90 = 320 mm So the drawer box should be 320 mm wide (external width). Practical note: 
Most installers will reduce this by another 2–3 mm total for smooth operation, so a real‑world target is often around 317–318 mm. The answer was provided by me but I need comment from experienced installer as I never build a drawer myself before . Also if you choose different brand of the drawer slide the width will be different as well.

The front facia has come away from a Blum kitchen drawer. It looks as though the screws have pulled out of the facia. The drawer looks to require disassembly to fix this. After someone who is familiar with this type of drawer system. I also have others that need to be realigned too if possible. Not sure if the cost to fix it. Happy to discuss if it’s a bigger job than it looks.

My kitchen drawers are push to open, spring loaded. There are 3 altogether and the lesser used drawer is OK. However the 2 frequently used drawers are becoming hard to open. Rather than a gentle push you actually need to hit really hard to make them open. Added to that one side of the larger drawer often doesn't catch properly so it sits lopsided. Its getting pretty annoying as you virtually have to smash the knife and fork drawer really hard with your fist to open it. They are branded KROME fittings (see image). I would like either to adjust or fix the current fittings OR replace with some other type of fitting that works. Naturally will pay for materials used. It is not an urgent job but would like to get it sorted over the next few weeks. Not sure what to put as cost as have no idea the time it would take so feel free to quote and explain. Cheers Cathy.