Find an experienced flooring expert in Sydney Eastern Suburbs

Please can you quote to repair concrete and install about 600x 2000mm flooring. See attached

Remove old boards and lay new decking. Approximately 6m sq. Timber has been cut to size but will need to be trimmed to match. Timber on site. Old boards to be cut in half and I will dispose. Joists are solid. Budget $600

Pull up a carpet and underlay and remove nails and dispose of carpet about 12 square metres. Carpet will need to be bagged for removal as is on top floor of apartment building and you will need to comply with the rules of the building

I would like someone to lay Floor boards down. Floor Select 8mm 2.13m² Elysian Oak Bevel Edge Supr Laminate on loungeroom floor please. 6.82m x 3.8m is the area of the loungeroom..

Hi, I am looking at installing engineered floorboards (240widthx2200length) 115sqm total + waste. Existing floor is a combination of existing pine floorboards and concrete. Rectify floor to make it level will be required at certain locations+ glue boards. No skirting required. Please let me know cost per square metre. Please add pictures of similar works. Thanks

Install approx 50m hybrid flooring. Click lock system (no glue). Existing stone floors are level and will be clear and clean. Skirting board removal and replacement should be included (not finished or painted just replaced).

Fix the flooring of a pickleball court, needs to be rolled up, pulled together, new adhesive laid and unrolled.

I need someone who has experience laying hybrid floors to help me lay them in two rooms. No edging required just the floorboards in two rectangular rooms

I need a contractor to lay cement sheet and then self level a hallway with concrete so that I can lay floorboards on top. Area approx 1m x 2m

We need someone to lay laminate timber flooring at our venue in the Entertainment Quarter Moore Park. The space is 6sqm and we already have the flooring.

We have recently moved back into our house and need help cutting and laying floor tiles in our garage. The garage / store room is located beneath our main house and is 16sqm (see photograph) The tiles are a hard wearing plastic suitable for garage locations with a simple click system for installation - see website - https://connectflooring.com.au/collections/connecttile/products/connecttile-garage-floor-tile-slate-grey The tiles are 40cm x 40cm (see photograph of example installation) For a professional finish, the chosen Contractor will need the tools to accurately cut the tiles to fit around the edges of the room and to size accordingly. I am available to support this task but do not have the tools to support the accurate cutting of plastic tiles.

Install 35-40sqm of click-lock hybrid flooring into 1 open plan room

1. Project Overview Seeking a qualified flooring installer (licensed and insured) to supply and install engineered timber flooring (floating method) across approximately 75 square metres in a commercial strata office in Sydney CBD. Removal and disposal existing carpet. 2. Flooring Product - Product Type: Engineered European Oak Timber - Brand: e.g. Plank Floors – Auber - https://plankfloors.com.au/wp-content/uploads/2022/11/auber-spec-sheet_2022.pdf - Dimensions: 1900mm (L) x 190mm (W) x 15mm (T) - Wear Layer: 4mm - Installation Method: Floating (tongue & groove) over underlay. 3. Site Details - Location: Sydney CBD - Total Area: 75 sqm (across open plan area and boardroom) - Subfloor Type: Concrete slab - Access: Lift access - Furniture/Prep: Site will be cleared prior to install 4. Installation Requirements - Underlay: Provide and install suitable acoustic underlay such as REGUPOL 3mm: https://acoustics.regupol.com.au/products/range/regupol-sonus-multi/regupol-sonus-multi-3/ - Expansion Gap: Leave appropriate expansion gaps along walls/skirting - Trims/Scotia: Include supply and installation of matching trims/scotia as needed - Doors: Undercut doors and jambs as required for clean finish (only 2 doors) - Direction: Lay boards lengthwise down the main axis of the space (unless otherwise advised) 5. Other - Removal and disposal of of existing carpet required All boards and underlay at owners cost.

Lay wooden floors in my apartment

Lay a large mat on top of an existing carpet and stick it down with tape, which I have. Moving light furniture involved.

Install 2 x vinyl stickers. They are in a square format (2m x 2m). Temporary sticker, applied from the outside.

Install approx 50 square metres laminate. 2 bedrooms 1 living room/kitchen Including removal of old laminate (we can use the building’s skip bin as there is currently remedial works on the facade)

We need someone to rip up the carpet (and dispose of it) and install floor boards from Carpet Court in the living area of the apartment. Not the bedrooms, kitchen or bathroom. Please provide a quote.

45sqr area wood laying for granny flat.The wood does not require underlay and thr place is new & flar. Materials are extra. Ready to start any time and we can provide one supporting person ( dimention 1545 x 182 x x5 mm + 1.5EVA Hendrik. It is one bed room with bathroom and dining kitchen combined. One room studio !

Hybrid flooring installation for hall way area (5sqm), 1 door shaving required. Materials including scotia and trims all provided

I need floor boards sanded back and polished. The room is approx 10m by 5m

Sanding ,polishing,seal of 75m2 floorboards with satin water-based finish. This is the hallway/living and bedrooms. And 11m2 pull up vinyl tiles and refit with hybrid floorboards. The 11mr is over 2 area- the sunroom and small kitchen. Preferred start next week.

Need someone to clean a timber floor in a small restaurant

Sand and fix floorboards. Then polish. Minimum dust

Wooden floor polished and refurbished.

Real Timber Floorboards sanding and polish.

Approx 35sqm. See photos

Hi All, I’m looking to get some old carpet torn up and removed with floorboards polished to match the living room.

Need to sand back wooden floorboards and repolish as a result of dog urine stains

Sanding and polishing parquet flooring 1 bedroom apartment

Need a floor polishing in Matraville. Flexible on dates but needs to be before the 4th of December. Please send pictures of previous jobs you have done.

Remove carpet Stain floorboard underneath Polish 2 bedrooms of 6x4m and 3x4m Floorboards are in good condition - photo of room prior to carpet being laid included Also photo of floorboards on level below to show desired look to match

Sand and polish hardwood floors Level 5 apartment access by lift Floorplan attached for sq m size. Floorboards are only in lounge/kitchen and bedroom, not bathroom.

Sand back and then polish these floorboards . Wanting to lighten them as much as possible. May need a few coats of polish. Sanding must be done on a weekend and polishing must be done on the following weekend. You must have your own supplies and tools.

I’d need help with polishing a 280 x 35 cm area of my wooden floor to match with the rest of the floor (per picture).

Hi there, we need a small area of flooring to be sanded and polished to get rid of circular mark scuffing from a desk chair on the flooring. Thanks, Dev.

Sand and polish floor boards (90sqm in total

Polish the hardwood floor

Sand and polish wooden floor boards One room 3.4m by 4m

Wax and polish wood floorboards main living space and corridor

Two adjoining rooms have hardwood floors. We have taken up the carpet and tiles that were covering it and we now want to bring the floors up to the same as the rest of the house. Please quote for one square meter on AirTasker and then we can come to an agreement on the final amount (approx 30 sm) First picture shows the floors in the rest of the house. Second and third pictures are the floors that need to be finished.

Remove wall-to-wall carpet and sand, finish, varnish wooden floors underneath. Two rooms (connected)

We have old lino floors in our kitchen which we want to remove and get back to the wood floor underneath. There is a rubber underlay under the lino which is stuck down. We aren’t removing our kitchen cabinets etc, so it’s really only a 12-15m2 space that needs to be completed. The floor will need to be sanded and refinished. I’ve also included a picture of another room where we had the floor refinished. The wood in the kitchen is the same as this.

We are re-doing our kitchen and have removed the floor tiles. There is original timber flooring through most of the kitchen, with some protruding nails. There is a small area (2sqm) with no existing flooring, but there are structural beam supports. Total kitchen area is approx 2mx4m. Looking for someone to sand and refinish the existing timber floors, and patch the existing hole in the floor. Open to suggestions around materials for the patch - could be laminate or timber - to match existing floor as much as possible. - Due date: Before Tuesday, 8 November 2022