Find a local floor sanding profesional near you

We're looking for a professional to sand and finish a wooden staircase (15 stairs with a landing half way up) in our house. It's currently carpeted (timber underneath) but the carpet will be removed before the start of the job.

Description: Seeking an experienced painter/handyman for an all-inclusive job. Tasker must provide all equipment and materials (sander, oil, paint, rust treatment). Scope: Deck (5m x 2.5m): Sand back weathered timber to raw wood + 2-3 coats of quality oil/paint. Timber Screen (3m wide): Prep and paint both sides (2 coats each side). Metal Letterbox: Wire brush rust on top + repaint the entire letterbox (2 coats) to match existing color exactly. Use rust converter/primer where needed. Budget: $100 (Placeholder—please provide your total quote for labor + materials).

Looking for quotes for sanding and polishing timber floors with a water based clear finish Two bedrooms, narrow hallway and living area totaling 50 square meters

I removed some cupboards in my main living area and the floor that was under the cupboards / bookcase need to be sanded to match the rest of the floor as they have some lacquer that the rest of the floor already has removed.

Looking for somebody to sand and polish the existing Tasmanian Oak and Radiata Pine floors in a current project. Approximatly 105m2 m2 of floor which requires sanding and polishing and 14 stair treads. Requires waterbased polyurethane Matt finish on the floor and Anti slip coat will be final coat on the steps. Requires somebody that is experienced and has previous projects they can provide with references. The house is vacant and clear for the works. Looking for the task to be completed in around 2-3 weeks.

Sanding and polishing of timber floorboards 3 x living areas 4 x bedrooms 2 x small stair cases (16 steps total) Areas are circled in red on plan

I have raw timber stairs need to be sanded and stained mathing to the existing floorboards. 1. Approx 1mm sand top tread (stair nose) 2. Stain wholes risers and treads including stair noses

I have a timber fence that has been pressure washer cleaned in preparation for oiling/ staining. I need the fence sanded lightly to remove some of the furry timber that is a result of the pressure washing. I have sanding equipment on-site to use if required.

sand verandah floor (jarrah tung and groove) approx 80qm to assist in matching new flooring to existing then apply 2 coats of oil to approx 100qm

Need a deck sanded back Croydon north location

Require Sanding and Resoration of Solid Blackbutt Residential Timber Deck Total Area - 33m2 approx( including deck , sides , stairs and stringers ) Scope of Works - Sanding to remove existing finish / stains and restore timber back to original bare state - Surface preparation - Apply 2 coats of good quality decking oil - Provide protection to surrounding area as required and clean site upon completion as required Please provide quote including : - Type of Sanding / Preparation proposed ( including recessing screws etc as required ) - Type of Oil / Stain product to be used - Estimated time - Examples of previous work

Approximately 230m2 of engineered floor that needs sanding and water base sealant.

Sand and polished floor boards in a three bedroom hallway living dining room house single story Bedroom1 - 4.0x3.0 Bedroom2 - 4.2x3.2 Bedroom3- 4.0x4.3 Dining - 3.6x3.7 Lounge- 5.8x4.3 Hallway tba Location 3084 Rosanna

We are seeking an experienced professional to sand and varnish a timber floor as part of a commercial fit-out. The total floor area is approximately 35 square metres. The work will involve sanding the existing timber floor to prepare the surface, followed by the application of a suitable clear varnish finish to protect and enhance the timber. Due to noise restrictions from surrounding businesses, the sanding component of the work must be completed either on Saturday afternoon or anytime on Sunday. Scope of Work: • Sand timber flooring (approx. 35 m²) • Prepare the surface for finishing • Apply varnish or clear protective coating to the timber floor • Ensure a clean, smooth, and professional finish Please contact us if you have experience with commercial flooring projects and can complete the work within the required timeframe.

We need floor sanding and coating of our hardwood floors, needs to be done on Friday 30th January. 45-50 sqm .

Task Description: We’re looking for an experienced and reliable professional to clean, sand and stain our timber back deck. Scope of Works: • Thorough pressure clean / wash of the deck to remove dirt, mould and old residue • Light to medium sanding to prepare the surface for staining • Supply and apply a high-quality timber deck stain (or happy to discuss product options) • Even, professional finish with attention to edges and steps Deck Details: • Residential back deck • Approximate size: 28 square metres • Location: Bentleigh

I’ve got a merbeu deck which is 1205 x 3200 plus 2700 x 1350 which needs to be sanded and stained. I can supply the oil, but all other equipment will need to be by you.

I’m looking for someone professional to sand approximately 40 square meters of wooden flooring in Greenwich. • Area includes 2 bedrooms and a hallway • Wood type: European Oak / Oak flooring • Goal: Prepare for refinishing / oiling • Please include rough sanding; let me know if vacuuming after sanding is included Thank you!

Hi, looking for someone to sand and stain 3 small areas of floorboards. Roughly 4 sqm in total. Located in semaphore thanks.

For sunny to accept Jeidnjsdn