Find an experienced flooring expert in WA

Have the materials but need a quote for installation

Looking for an experienced installer to complete flooring at my cafe. The premises are approximately 102 m² overall; exact flooring areas can be confirmed from plans/site measurements. WORK REQUIRED - Commercial epoxy/resin in the kitchen, staff area behind the coffee counter, and exposed floor beneath the counter/equipment, including around the coffee machine and hand basin. - Laminate flooring in the dining/customer area, including underlay, trims and transitions. - Suitable floor preparation, edge finishing, sealed junctions/coving as required, and clean-up. Epoxy must be slip-resistant, impervious and easy to clean. Laminate must suit commercial cafe use. Please identify any major repairs or levelling before the work is agreed. MATERIALS We will go together to select and purchase the laminate and epoxy/resin, and I will pay for these separately. Please advise on products and quantities. Any additional materials or consumables, such as underlay, trims, primer or sealant, must be identified and agreed before purchase. TOOLS AND EQUIPMENT You must provide ALL tools, machinery and equipment needed, including floor preparation equipment, cutting and laminate fitting tools, and epoxy mixing/application equipment. Flooring materials are paid separately by me. Please include relevant experience, examples of similar work, earliest availability, estimated duration and curing time. Plans and photos can be provided.

Looking for someone experienced to supply and install approximately 70–72 m² of 5mm Tasmanian Oak hybrid flooring. The existing carpet has already been removed. We also need approximately 3-5 m² of kitchen tiles removed, including grinding and any necessary floor preparation or levelling. The job should include matching scotia and trims. Please provide a quote for the complete job, including materials and labour, and let me know your earliest availability. Looking to get this done ASAP. Thanks!

After a quote to replace or weld patio support pole, remove,provide & install ~33m2 new composite decking to existing patio and install soak well for down pipe on the rusted pole

Looking for an experienced vinyl flooring installer / floor layer to provide a quote for replacing the existing sheet vinyl flooring in my kitchen. The work would involve: * Removal and disposal of existing sheet vinyl flooring. * Inspection and preparation of the subfloor if required. * Supply and installation of new, good-quality sheet vinyl flooring (not vinyl planks or tiles). * Professional cutting, fitting and finishing around kitchen cabinets and edges. IMPORTANT: I am only requesting a quote at this stage, NOT booking the installation work yet. Ideally, I’d like someone who can inspect the kitchen, take accurate measurements and provide a detailed quote covering materials, labour, removal and disposal. Please let me know if you offer free, no-obligation quotes. Location: Stirling, WA. Photos of the existing kitchen flooring are attached.

Need an experienced handyman or builder to Install 3 rooms of vinyl flooring and the house for skirting,

I’m looking for someone to install decking in my front courtyard, approximately 14m². I’ve already removed the existing pavers, so the area just needs to be levelled and prepared for decking installation. Looking for a quote for the ground preparation and installation only. Located in West Perth. Please let me know your availability and estimated cost.

Need about 10-15 SPC floor boards installed.

I have the floor boards just need to have them installed.

Hello. I need a second quote on 74 sqm of hybrid flooring. Lightest shade of grey. Scratch proof, water proof & warranty. Currently quoted at $5,000. Not necessarily looking at cheaper but want to explore what’s out there. Licensed & insured business only please 🙏🏾

Lay floating floor boards in a small walk in robe

Lay Jarrah boards 130mm x 20mm in varying lengths, approx 56m2 to existing subframe. I will supply boards, oil and remove the existing boards

Looking to get three bedrooms new hybrid flooring supply and install

Looking for someone experienced in installing hybrid flooring in two rooms of my home in High Wycombe. Job details: * Approximately 33m² total * Master bedroom including wardrobe and theatre room * Hybrid flooring has already been purchased * Existing carpet will be removed prior to installation * Must have own tools and previous flooring installation experience Measurements: Theatre 3.5x3.5 Bedroom 4.2 x 4.2 Wardrobe 1 x 1.3

Supply install hybrid flooring

Installation hybrid flooring 10sqm in theatre

Installation of vinyl flooring

Floor boards broken, new boards need to be relayed I have spare floorboards, install only required

Need a quote for installation of laminate flooring in store/office space. It’s a small 1.6mx2.6m room. It currently has a stick on vinyl floor from Kmart just so we could use it in the meantime. That will come off easily, but will need an underlay as it’s just concrete underneath. All floorboards and scotia are already here ready to install.

Easy to install. Just needs: -Install on upstairs landing -Install in 3 bedrooms There are: -clean levelled concrete floors -54sqm hybrid aqua flooring already here Only thing is you’ll need your own tools.

Looking for someone who can quote up and carry out floor sanding and polishing. 3 bedrooms and a hallway. Carpet has already been removed.

Quote to sand, polish, seal floor. Old 70’s extension, not sure how much aggregate is in cement floor. Need an honest appraisal. Room is approx 6m x 6 m

Looking for someone to do laminate timber marks cleaned and polished.. replace few damaged planks with spare ones around 300sqm

Solid timber floorboards needing a good polish/refresher in open plan area - unsure how to budget this as not familiar with pricing. See pics!

Hi, we're looking to get a quote for a property at Kenwick. We have approximately 100m2 across three small bedrooms and a living area. The existing flooring is carpet, which needs to be removed, and we would then like the existing concrete floor polished. Could you please provide a quote for the carpet removal and concrete polishing? We would appreciate an estimate today. Please see photos attached.

Scratched some floor tiles hoping to get them polished out

Need wooden floors sanded and polished please Less than 100m2 In Scarborough

Timber floor damaged due to wrong chemical . Need to fix it.

We are renovating the kitchen in our house currently there is a breakfast bar with an overhang on one side. We are looking to drop back the cabinetry on the end as well to make the overhang wrap around. In order to do so we must remove an in-built vacuum and patch and polish the wooden floor underneath.

Restore and polish old wooden jarrah floorboards - approximately 100 sqm. The floors have been covered in carpet/lino for some time (not glued down). See the pic of wood under the existing floor covering

need a floor varnish and polishing bit of rough

We are vacating our property and the Removalists have scuffed the dark timber boards in the lounge and dining room. I need someone to polish the floor on Monday- if possible. Just two rooms

We are selling the house Our floors boards have some paint and scratches ect I want them buffed back and re polished

Scratches on floor and polish wearing off. Need repolishing.

Typical small 1970s 2x1 house with jarrah floors that need polishing. How much would this cost and how long would it take? Could it be done on Friday the 17th of July from 12.30pm? Or Saturday 18th?

Looking for an experienced timber floor sanding professional to restore exposed Jarrah floorboards in my home in Orelia WA. Scope of works: Sand existing Jarrah timber floors Minor preparation as required (staples, nails, etc.) Apply clear protective varnish finish Leave floors clean and ready for use Areas to be completed: Living room Kitchen Master bedroom Bedroom 2 Bedroom 3 Approximate sizes from floor plan: Living: 4.5m x 3.4m Kitchen/Dining: 4.5m x 2.8m Master: 3.1m x 4.3m Bedroom 2: 2.6m x 3.7m Bedroom 3: 3.8m x 2.6m Total floor area approximately 50-55m². Additional information: Floors are currently exposed Jarrah. Previous floor coverings have been removed. Some glue residue remains and will need removal. Easy access to property. Please provide details of your experience with Jarrah floors and photos of previous work if available.

Have recently had a tenant move out. The floors are quite scratched and dirty. Need someone to clean and polish to the best of their ability. Ideally they need a sand but might do at a later date. There are 5 rooms, hall way and kitchen. Very small square meterage. Rooms are empty. May require cleaning fluid and polishing compound.

Timber floors need rejuvenation. One area needs minor repairs

135sqm floor needs sanding and polishing

Some damaged floorboards need to be replaced. After will need the dining/living/kitchen floorboards to be polished. There are some cracked bathroom tiles that need replacing. And lastly the pavers outside will need painting.

8 - 12 boards on wooden floor need sanding to remove small areas of scratches and then refinishing with polyurethane varnish.

Timber floor in loungeroom refinished.

Wooden floor sanding and refinishing

refinishing and coating of Jarrah Flooring approx 180 sq m - two storey townhouse. Will be vacant at time of job. Floor is worn from previous tenants. Want to get a long lasting coating to protect the floor. Prefer bona coating. - Due date: Needs to be done on Monday, 4 September 2023

Install 4.5m2 of engineered timber flooring in a study in Fremantle. The floor is freshly screeded flat. Installation includes application of moisture barrier.