Find an experienced flooring expert in Brisbane

Quick step floorboard installation (tongue and groove) and skirting board installation for a 2.5 x2.5m room.

Looking for an experienced flooring installer to install engineered timber flooring in a small apartment (approx. 24m² total). Existing carpet and underlay will be removed and disposed of prior to installation. Subfloor is a concrete slab, which will be exposed before installation. The slab is expected to be ready for install, however if minor preparation or levelling is required, this can be assessed on site and agreed as an additional cost. Scope of work includes installation of engineered timber flooring (visible in the photos)in the living room and bedroom. The floor boards are to run lengthwise toward balcony (long direction of space), continuously between the rooms with no transition strip and in a straight lay pattern. Please ensure random staggered joints (no repeating patterns), maintaining appropriate expansion gaps and a clean finish. No scotia or skirting required. The sliding door visible in the photos will be removed prior to the works commencing. Materials (supplied): - Engineered timber flooring (already purchased), plank size: 1900mm x 190mm; 26sqm - Acoustic underlay (high-performance, apartment compliant) - Transition trims (for doorway and tiles) - If any other materials are required, I will be happy to provide them. Apartment is located on second floor with lift access. On- street parking only. The following details are required from contractor by the Body Corporate: - Trade/s license/registration (must be current) - Trade/s insurance (must be current) - Contractor contract Exact timing is flexible within a few days after 20 April. Looking for installer with experience in engineered timber flooring and ability to provide contractor details for Body Corporate approval. Photos of previous work will be much appreciated.

Hi need labour to help with Lay vinyl flooring just for living room in one day. I will provide material. Need experience person do the proper job.

20 sqm needs install of hybrid flooring of which 1.5sqm of tiles needs to be removed and leveled - I just need someone who can do the leveling (use their own equipment) and then install I will purchase the materials

Removal , prep and install hybrid flooring , 20m squared

New hybrid flooring is being installed, we need supply & installation of white scotia for approx 30meters .

Cut and lay loose vinyl tile squares. No glue down required. Just cutting with Stanley knife. 10sqm

I'm looking to change the flooring of my apartment. Only living room and dinning area. I'm thinking either engineer timber or hybrid. I'll provide the material, just need help with installation. Thanks!

Hi! I need someone to install some vinyl floor planks on top of the tiling in this unit. It’s quite a small space- toilet, living and kitchen areas. I will purchase planks, all you need to do is do the proper install. Please tell me how much you’d like to charge as I frankly have no idea. Cheers!

Need a handy person to install sheet vinyl (already sourced) on top of existing vinyl in bathroom/toilet and seal around sides. 2.5 x2m room. Small area but lots of precise cutting around pipes, skirting, toilets, etc. BYO tools.

Need someone to supply and install lino to kitchen, laundry and toilet area of house. Alternatively floor sanding is an option Please see approx measurements. Ideally timber plank lino. Please note that budget just put in there as something had to be entered. thanks for considering

Lay lino in two small offices each 2.3 x 2.137

Need hybrid flooring installed and skirting board replaced in a living room/kitchen, approximately 5.5x6m. Hybrid flooring has been purchased and is located in the unit. Skirting board material has not been purchased. Property will be vacated for the task.

Approximately 15 square metres of 25 year old water damaged floating floor boards are to be pulled up and replaced with matching recycled timber floor boards (on hand). A workstation is to be moved before and after the reflooring (I can offer assistance in that part of the task). The replacement floor boards are to be cut (scored and snapped) to measure by supplied (brand new) Stanley knife and steel square / straight edge. Warped boards to be moved (via supplied trolley) to waste bins on site - one trip only will be required and can be done when the job is complete and when exiting the apartment building.

Need assistance who can install a floating flooring. (Materials not provided) Please see attached image for the measurement

We have a our floor covered with interlocking rubber tiles at the moment, however we would like to install a wood look floating floor (eg. vinyl tiles or similar). Is approximately 40m2. The space already has existing underlay in the green section of the attached floor plan. The yellow section is timber, and would need underlay (which we could supply). Purple section includes a small bathroom (no shower), which has an existing vinyl floor, that scoops up the wall for waterproofing. See additional photos for some of the office space too. Happy to discuss price further. We would likely supply the tiles ourselves.

Hi there, I am about to move into an apartment I have bought and looking to replace carpet. I’m looking for an experienced flooring installer to: 1. Remove and dispose of existing carpet and underlay, and 1. Install wooden planks in a 54m² (minus the planks in the kitchen) unit (bedroom and living area). Details: • Apartment located at 347 Ann St, Brisbane CBD • Hybrid flooring will be supplied • Please include in your quote: • Carpet removal & disposal • Subfloor cleaning/prep (concrete slab) • Installation of new planks • Scotia/trims if required (happy to cover material cost) • Flexible with timing — settlement isn’t until end of NOV but would like it to be done in 2 weeks if possible

Preparing of subfloor, installation of hybrid planks , remove and l reinstall skirting.

I’m an installer myself I need an experienced flooring installer to do some work for me this week prices on negotiation. I have a 50sqm with scotia and 125sqm lay all hybrid flooring.

Removal and install carpet

match existing pine flooring. kitchen cabinets removed, couple of pipe holes also require filling. thx.

We need our desk sanded and polished. It’s approx 25 sqm

Minor scruff marks on the timber floor wax, i'd like to have this covered and repaired.

Commercial space needing cement floor levelled and polished- roughly 100sqm

Looking for a quote to remove old carpet which is laid over chipboard secured to old timber floor. We will then need the timber floor sanded & polished. There may be a couple of broken planks to be replaced or patching required. The area is roughly 55sqm (3 bedrooms, hallway, lounge room).

Approx 112m2 mix of hardwood and hoop pipe timber floor. Job required: - Floor leveling - Gaps filling - Sanding and Polishing - Waterbase poly Budget is $3000

Polish /buff small pet scratches on timber stairs and some other spot throughout house Please reply if you have any tricks or suggestions to get rid of these small scratches a total too bad until you look up close. They’re hard to see in the photos.

Sand and polish timber kitchen and laundry floorboards. The kitchen is 5.0m x 3.65m and the laundry is 3.5m x 1.75m. Both rooms are completely empty. The kitchen floorboards are wider hardwood and the laundry floorboards are narrower.

Old wooden floor needs to be sanded back and polished.

I did a scratch on the floor , just need someone to do it .

Removing the carpet, sanding and polishing the timber floor.

Sand, tint and polish pine floorboards for approx 100sqm

Need someone to fix one floorboard that is loose and sand/polish all of them. Area is kitchen, dining and living area. Photos os floor plan attached. Unit is unfinished and the job can be done from 15th March to 18th March.

there is patch on the floor in which the polish is peeling off and I would like it to be sanded and polished

Clean off these rubber marks and scratches from floor and polish. I am not sure what the method would be but please let me know what you suggest! Space is approx. 10 x 20m however not all of the floor is damaged. I can provide a video or you are welcome to inspect. Thank you

Sand and polish timber floors in three bedrooms (30m2). Nails and staples already removed and edges sanded w. edge sander. Ran out of time for drum sander and polish. Should be quick and easy for someone who knows what they’re doing.

Wooden Floors to be Polished approx 50 square metres. Job needs to be completed ASAP.

Light sand and polish timber floor with water based system.

Looking to pull up the carpet in 2 bedrooms of our new home and polish and varnish the timber floors underneath.

Sand and polish floors in five rooms

Hi there, We have Merbau decks that need to be machine sanded back ( we will hire sander from Bunnings for you) but first the nails need punching in a bit to allow sander over. Then it needs restraining. At Toowong. Thanks!

Looking for someone to sand back and refinish my outdoor timber bench seat, then seal it with a durable natural matte finish. Bench seat is removable and can be taken away to complete off site. I would like pickup and return included. Size Approx 3.0m long x 0.4m wide. Finish required Natural matte, low sheen. Prefer the most durable option for outdoor use. Happy to follow your recommendation, but I am leaning toward a quality exterior decking oil in a natural matte finish for longevity and easy maintenance. Scope of work: - Transport off site - Sand back to an even finish (top and edges, tidy up the ends, bottom if needed) - Prep and clean properly before coating - Apply stain if needed to even out colour, otherwise, clear natural is fine - Apply exterior grade protective finish in natural matte (2 to 3 coats as required, coat all faces including: top, edges, and ends and bottom if recommended) - Return Please include in your offer • Total price including materials and pickup and return • Product system you will use (brand and type if possible) • Estimated turnaround time • Photos of similar outdoor timber refinishing work Timing Flexible, ideally within 7 to 14 days.

Kitchen is being renovated and section of floor needs to be removed and replaced to suit new design. We have the material ready to go - Due date: Before Thursday, 29 February 2024