Find experienced local fencing contractors near you

Building a fence around a carport. This needs to include an access gate and the ability to support climber plants Type of gardening: Other Size of garden: 50m²-150m² Has green waste bin: No

Looking for an experienced handyman/fencer to install aluminium garden fence panels and a gate ( material wil be provided) approximately 15m. Scope: •Install fence posts, panels and gate All materials will be supplied by owner (or quote separately if preferred)

Need just a very basic fence to keep chickens in one area. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

I have two garden gates that are currently wooden and damaged, and I need them removed and replaced with new Colorbond garden gates. The approximate dimensions are 194 cm high by 86 cm wide. Because I am not a professional, there might be about a 5% margin of error in my measurements, so I would need you to come out to do a precise measurement after accepting the job before proceeding with the installation. Could you please provide a total quote covering both gates, including materials and labor? I am hoping to get this installed as soon as possible.

Fence on Front garden. I am happy to provide the material or if you can organise that will be great. The amount offered is only for installation. The area to be covered is only 14.8 metres, needs low fence probable 900m height just to avoid leaves and litter coming to my front yard/garden. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

I haven’t purchased any materials, looking to put a small gate in to block dogs from getting to rest of garden while I’m doing some work on rest of it.

Wanting to fence off my garden patch so the dog can’t access. Needs to have a gate mechanism.

We are putting in a sliding gate at the front of our property and need to remove the existing fence and brickwork. Also build back the garden with a wall so sliding gate can fit along side the fence. Would prefer wall to be built with volcanic rock on site already / steel posts and timber or bricks but open to recommendations. Include tip fees in quote to remove. Please let me know if you have any questions or want more photos

I have a wooden fence in my back garden. Id like to have it taken down and a new fence in its place. Preferably steel instead of wood this time.

Repair to aluminium powder coated slat fence car gate. 8 slats need rewelding.

The door seems to be shifting away from the door frame. As a result, the latch is becoming more and more misaligned with the strike plate, making it difficult to lock properly.

Two wooden gates swollen in the rain, need repairing and re-hanging. May need to lower paving immediately under the gates

Garden gate has come off both top and bottom hinges. Hinges and screws need to be re-attached

I need a simple single swing gate (roughly 85 x 115cm) installed in the chain-link/wire fence in the garden that matches the existing fence style. This may include installing a new fence post as well. For the quote please include the costs for the fence post (if needed), the gate (basic galvanised gate, no automation or fancy ironwork) + labour. Thank you.

The gate doesn’t latch shut anymore and will need fixing

I have an existing garden fence panel that needs to be moved circa 400 mm back to its original location. Accidentally moved during a renovation and bow blocks the electrical meter. Holes from original location already there, fence just needs to be taken down then moved back Can be done any day before 29/06/26. Probably 1 hours work. Back gate will be unlocked, no one will be home

Frontyard fencing and garden gates replacement. Please see attached.

Hi. We need to get 2 swing style garden gates fixed to make them close properly again. I've attached photos. The screws holding the latch on one of the gates have come out so need bigger metal screws to re-attach the latch securely. The other gate I think just needs readjustment so that the latch clicks into place properly. Thanks, Wes

repair falling garden barrier see pic

Clear garden then carry out minor repairs to fence, paint fence, turn over topsoil, remove besser blocks and concrete pavers, move soil mound into bin

Looking for an experienced fencing contractor to supply and install a black chain-link / cyclone mesh fence for a dog area at my property in Narre Warren North. I would like the fence to look similar to the attached photos: • Black chain-link / cyclone mesh • Black posts and top rail • Approx. 40 metres or more in total • Preferably around 1.8m high • Strong and secure enough for dogs • Approximately 1–2 gates required • Neat, professional finish Please quote for supply + installation, including posts, mesh, top/bottom rails or wire, concrete and gates. The ground is mainly grass/soil. Please let me know: 1. Your approximate price per metre or total price 2. What materials/specifications you recommend 3. When you are available 4. Photos of similar fencing you have completed I can arrange an onsite inspection if required. Location: Narre Warren North VIC

Pool safety cert required plus repairs to pool gates. One won’t self close and the other won’t latch to the magnet

Hi, I’d like someone to cut one of the vertical bars on this pet gate so that my cat can get through, but my dog can’t. * Bar diameter: 13 mm * Cut the bar at the top and bottom * Sand/grind the cut ends so the frame is flat and smooth Preferably someone in the northern suburbs. I’m happy to drop the gate off and pick it up. Please let me know if you have the tools and can do this. Thanks!

See attached pics. Our sliding gate leaves a gap our dogs can slip by. We want to construct a simple hip high mesh fence around the gate to block any dogs escaping

Need 140m of dog barrier wire installed and set up. This will go around my fence line, need to go 1-2 inches in ground (grass) and pebbles along minority of the way.

Description I need a handyman to fix the alignment of the latch on outdoor gate. As shown in the photos, the latch and catch are currently not lining up correctly. I would like a small wooden piece/block added behind the catch/keeper to raise it and bring it into the correct position and alignment with the sliding latch. The existing latch can be reused if possible. The main requirement is to: * Add a suitable wooden piece behind the catch. * Raise and reposition the catch so it lines up with the sliding bolt. * Secure the wooden piece and catch firmly. * Make sure the latch slides in and out smoothly and holds the gate securely when closed. I require a valid invoice to be issued immediately upon completion of the job Please bring suitable timber and tools to complete the job.

There is two access points to our clothes line. One is behind a pool feature and the other is from behind the garage. There was gates there before. Solid anchor point. Height 1.5 x 1 meter wide approx. supply and install

Need dog mesh fixed to back of existing timber posts. Front fenceline will be this product. With a total of 65m. (https://www.aluminiumscreening.com.au/Dog-Mesh-1200h-Delivered?srsltid=AfmBOopehKLWntXZTkPZGazK4jql5LiFTGYUFTDSFlEfPZJ_vuk_s30b) Back fence has a total of ~130m of existing timber round posts. Dog mesh to be fixed over the top of this. Product of similar type but not PVC coated. Back fenceline will be cleared on our boundary prior to install. Mesh is already on site ready to install.

Looking for someone experienced with Colorbond fencing/gates to: Adjust/repair side gate so it closes and latches properly. Dog-proof gaps underneath existing Colorbond fencing for a very small Chihuahua. Fence is approximately 16 panels × 2.3 m (37 m total). Around 10 panels have gaps roughly 8–12 cm underneath that need blocking. The remaining ~6 panels have smaller/occasional gaps (under ~8 cm) that should only need minor patching. I was thinking treated timber slats/plinths along the bottom, but I'm open to other neat, durable and reasonably priced options. Please include materials and labour in your offer. Wallsend

This task is for a quote only for the following task: I have budgeted about $4000 for the completion of this but want a quote before assigning * Replace existing pool glass with frameless glass * Repair/adjust the pool gate/s so it complies with current pool safety requirements. * Complete any work required to help obtain a pool safety certificate.

Hi there, I am looking for an experienced tradesperson/contractor to design and install a custom indoor wooden dog fence. Project Details: * Type: Indoor wooden dog safety fence / enclosure * Height: 1.2 meters * Length: 7.6 meters * Material: Solid wood. * Fixing Method: The wooden fence should be installed with posts securely anchored directly into the floor (not freestanding). The floor has an epoxy quartz coating, and drilling into the floor is permitted. * Design: Similar to the attached picture, with a walk-through gate and a secure latch. Quote Request: Please provide your rate per meter (including materials and labor), or a rough estimate based on these dimensions.

My balcony has a fence of about 9metres in length. I need to install a Perspex barrier of about 50cm high to prevent my dog from falling off. Job includes purchasing the Perspex and full installation

Gate is catching, making it a little difficult to open the pedestrian gate.

Quote for dog fence with gate. 1 metre height and 3.4 metre wide.

Looking for someone to install a Sureguard Pingg-String cat containment system on the timber paling fence at my property in Augustine Heights. Total fence perimeter is approximately 58 metres. All components have been purchased and will be provided on the day. This includes insulated cable, extension kits, end post kits and energiser included. The job involves mounting bracket arms and insulators along the top of the fence, running and tensioning the wire angled inward toward the yard and rigging the gate loop over the single gate. The energiser position will need to be assessed and decided on the day based on what works best for the setup. It needs to be installed in a north-facing position with access to full sun. There is one fold-down clothesline mounted to the fence that will need the wire routed carefully around it with extra insulators either side to avoid contact with the metal frame. No drilling into structures required as all fixing is into timber palings. Happy to be home on the day to show you around the property before you start.

Need someone to put up a temporary mesh fence along my back boundary approx 30 m

Two gaps tightly filled in the fence line

I need a dog gate for my side yard. House is hebel and fence is timber. We had one done for inside the house and if you can do something similar for the side yard that would be amazing

Roughly 10 metres of fencing to put up just 5 star pickets and wire not a big job at all. Just supply all materials (will cover cost plus job cost)

Long swinging gate on the side of my house. I need the slope pictured underneath the gate covered to prevent dog from escaping, but still able to swing open.

I have 35 metres of colour bond fencing to be done, 1800 mm high - white. There is a 16 metre run and a 19 metre run, no gates.

We are looking to have nine sheets of paperbark colourbond fencing replaced. There are three panels and associated rails, posts and footings as per the photo in the advert. The old fencing is to be removed and disposed of as part of the job.

Colourbond fence topper 7 panels to be installed. Just getting a quote for now to see if feasible

Remove and dispose timber fence approx 23m Supply and install variant of colourbond / aluminium fence 23m x1.8m high and x1 gate 900mmx1800mm with posts, railings and fixings. Also remove small wired fence and supply and install variant of colourbond / aluminium fence approx 5.5m x 900mm

Title: Install 16m Colorbond Fence – 1.8m Monument Sawtooth (Calamvale) Need approx. 16m of new Colorbond fencing installed at a residential property in Calamvale 4116. • 1.8m high, Monument colour, Sawtooth profile • Supply + install • Must be straight, plumb, solidly footed and neatly finished • Site inspection encouraged before quoting — confirm access, ground conditions Your offer should include: a fixed all-inclusive price (materials, labour, delivery, disposal, GST), timeframe and earliest start Happy to arrange a site inspection at a convenient time.

4m X 6ft timber or colorbond fence Access available Remove existing timber fence

We moved to this place and the side gate is too heavy and doesn’t open. Wooden post is broken We would like someone to replace it with a colorbond steel one with proper latch and lock

You are quoting to install 8 x extension panels on top of colour bond fence My fence is the cottage green one. Photo of extension panels from Screenline pic attached. I already have the 8 x extension panel kits from Screenline.

Hi guys, I need someone professional to build and install a colorbond gate to replace an existing one. Dimensions are 880w x 1820h Im currently completing work on a property which gate needs to be replaced. I would like an all inclusive price. Existing lock to be reinstated. Colour is mission brown Rear lane access to drop off materials however parking would be in front of property so access is very good. Let me know what you need to know I would like it completed this week.

Colorbond fence as discussed

One Colorbond fence panel has come loose and is leaning after a storm (see photo). I’m looking for someone experienced with Colorbond fencing who can inspect it and reinstall/repair the existing panel if possible. I believe the panel may just need to be re-secured, but I’m happy for you to assess the best repair. * Located in Aveley WA 6069. * Easy side access. * Flexible with days and times. * Please bring any tools and fixings required. * If additional materials are needed, let me know before completing the work. Please provide your experience with Colorbond fencing and your total price to complete the repair.

Remove existing sqaure panel fence and install a colourbond fence kit from Oxworks. I am happy to remove existing fence on the day if easier. 2 x 2400mm wide x 1800mm high sections which fill in between Linestone pillars. Can secure into Linestone Wall so no digging required.

Post has come away from concrete footing , needs digging out and a new footing and post installed

Supply and install 15 meter colour bond fence

I need to build new colourbond fence on the boundary between mine and my neighbor. It is 14.4metres in length . 2 metres in height. Holes for posts and build dug. You need to set up posts and install new fences. I can ordered all the materials from OXwork. Offer me your labour cost please.

Need someone to assist in securing my yard. Need 1.8m colourbond gate to left hand side of house. (Photo with the monument colour colourbond fence) space is about 1-1.5m wide. Down side of garage need colourbond fence to block from fence to garage (about 1.8m high and 1m wide) needs to be able to be removed. Between house and garage (about 3m wide. 1.8m high) needs to be able to be removed. To do renovations. The corner fence between the new colourbond fence and older style fence I need piece of corner metal drilled into it temporarily until I replace fence (I have done it to the opposite side)

Chapel Hill, QLD 4069 Need a fence installer for about 42m of fencing. Rough split: - 18m Colorbond - 18m lapped and capped timber fence - 6m stepped timber corner - 2m timber to match neighbour fence I have Colorbond sheets and rails on site. I likely need you to supply posts, caps, screws, concrete, timber, paint and other bits. Fence goes in front of a sandstone retaining wall, close to the boundary. Ground is clay and sloped in parts. Wanted: - Around 2m high, or highest simple/legal height - Solid posts, set deep enough for clay soil - Lapped and Capped Timber Fence painted Monument - Small 2m neighbour match section left unpainted - Colorbond does not need paint - Simple, neat, strong finish - Clean up after Budget is indicative but limited - please provide detailed quotes and when you can start and how long it would take. Site ready for work to start today. Photos/sketch attached.

Require a colour-bond side gate to be installed. Dimensions are approximately 1200mm W by 1600-1800mm H

We need a section of this timber fence removed at the back of our property, which faced onto a laneway. Gate must open inwards. Looking for a secure, lockable privacy gate in monument grey colorbond with steel frame, concreted in. Just a pedestrian gate, just next to the shed we are modifying in the photos. . Gate to be 1800 x 1200 wide Access is easy from the laneway. this is both to supply and install.