Find a fence installation professional in NSW

Supply and install a colourbond fence gate with a lock. Remove the existing colourbond fence and reuse materials from it to match colour. Make sure its functional, stable and doesnt sag over time.

Supply and install approximately 34.535 linear metres of 1800mm high Colorbond panel fencing along the left-hand boundary, starting from the back corner and continuing to align with the front of the building. Fence posts are to be installed with longer posts to allow for a 200mm x 50mm treated pine sleeper underneath the fence panels. Supply and fit treated pine sleepers underneath the fence line. Note: Fence length shown on sketch: approximately 34.525m / 34.535m along the boundary. Send me an estimated cost via message. Please note, it is completely flat land and straight boundary line with no slope.

Instal same colour bokorbond gate from where the down pipe is to the left side

Remove and replace 20m of existing timber boundary fence plus 3.3m side fence including doors. Scope: * Approx. 20m boundary fence * Additional 3.3m side section/gate area * Removal/disposal of existing timber fence * Supply and install new 1.8m high Colorbond fence * Flat block with easy access Photos attached.

Hi there, I’m looking to install a fence extension similar to the one shown in the photo. Before placing an order, I’d appreciate some guidance to make sure everything is suitable for our space so a site visit will most likely be required :)

Fencing installer Required – Colorbond Fence (Burnished Copper / 2.1m Pool Compliant height) Looking for an experienced fencer/installer to supply and install a section of Colorbond fencing in Burnished Copper colour for a pool boundary upgrade. Remove and dispose of old and replace with the 4 new panels and posts Job details: Replace approx. 4 existing Colorbond panels Install 2.1m high Colorbond panels (pool compliant) Colour: Burnished Copper Boundary fence forms part of NSW pool barrier Existing fence height approx. 1.75m Location: Revesby / South West Sydney Requirements: Must have experience with pool compliance fencing Knowledge of NSW pool safety regulations (1.8m minimum barrier height) Must ensure no climbable features on pool side Neat, straight finish required Looking for: Supply and install Licensed/experienced people only To quote, please include: Price Availability Images of similar work

Looking to have a glass pool fence professionally removed and re-installed to pool standards after decking completed.

Remove the brick and replace with colorbond fence. roughly 10 meters

Need a professional to remove the old fencing and install a new power coated metal fencing Roughly 15 metres and colour of the metal requires as “monument”

See photos. Need handyman’s help installing fence pickets for around 11 meter length. 1st photo showing where and 2nd photo showing which type I will provide all material, just quote for labour. Need to get it done before Fri 1st May at the latest

Fense gate with post ti install

The bottom of the panel in our gate has corroded through and will need replaced. It looks like the gate frame needs to be taken apart for the new panel to be put in, then welded back in place. Likely a quick job if you have the necessary equipment.

Attache two gates on both sides of house as colour bond 1.5 green colors. Thanks as shown in the photo graphs. Supply and instal thanks please. Sorry i am not sure about the cost or prices help me great. VJ

Need a retractable mesh baby gate (Sulishang, 86cm tall, extends to 140cm) wall-mounted in my home. Walls are gyprock with timber studs and brick behind. Baby gate and assembly set supplied - just bring your drill and tools. Link to baby gate: https://www.amazon.com.au/dp/B0B2NV656K?ref_=pe_64690442_581645102_t_fed_asin_title&th=1

We’re looking for a handyman to install an outdoor side access gate on one side of our house, to match the existing gate setup on the other side (see photos). We already have the gate and metal post supplied. The job will involve: Installing and securing the post to the concrete Hanging and aligning the gate Fitting hinges and latch to ensure smooth operation Matching the positioning and finish of the existing gate as closely as possible Access is a narrow side walkway between the house and fence. Looking for someone experienced with gate installation who can ensure it is level, secure and functional. Please bring any required tools and fixings.

I’ve purchased a retractable dog gate and need someone to install it please. Let me know if you can help.

Need a pool gate and fence installed in a commercial warehouse around a door

I need some lap and cap fencing installed. There is no current fence, just some bamboo (see photos). There’s a colourbond fence that lines the property boundary which is to stay where it is. The fence size is to be 7m and 3m.

Looking for someone to install snake/mouse-proof wire mesh along approximately 40-45 metres of Colorbond fence perimeter in our backyard. All materials will be provided. Open to advice, but initial plan is: - Mouse/Snake Mesh (6.5mm aperture, 90cm wide) (https://www.bunnings.com.au/jack-90cm-x-30m-x-6-5-x-6-5mm-mouse-mesh_p3068782) - Star pickets with zip ties for securing The job involves: - Hammering star pickets into the ground along the fence line - Digging a narrow trench along the fence base - Bending the bottom of the mesh into an L-shape and burying it as a footer to prevent digging under - Attaching the mesh to the star pickets with zip ties - Backfilling the trench The fence is Colorbond (shared fence) so no screws or attachments to the fence itself - again, open to recommendations if you see a better way to implement.

We require a carpenter to build and install and paint (we have the paint) 3100 x 1100 fence in our entry area. Sketch of what we are after is attached as well as photos of the area where the fence will go (on the grey border tiles). There are already chemset bolts in place which were used to secure the previous timber fence. Picture attached of where the idea came from.