Find experienced local fencing contractors in Collingwood

Hi fencers I need a qualified fencer to build a 2400m fence which is 3.5m long, plus an additional separate post for existing horizontals to fit into. Needs to be completed on a morning completed before 12:30. Title points/lines have been mapped out by land surveyor. I will be supplying the materials. Fencer will need to provide their own tools.

Need a peice of colour bond fence repaced 1 panel as soon as soon possible - Due date: Flexible

Side fence between 2 properties in Cambridge St Collingwood. Good access from front (direct passage) and rear laneway. I can remove the old fence and posts so the space will be cleared. Measures 8.7 metres in length, normal post & rail timber paling construction will do. There are some plants which need protecting and a water retic which needs to be kept / replaced after the works are done. - Due date: 7 - 14 days (if possible)

Need the old fence taken down and new colorbond fence put up. the fence is approximately 3.7 m wide and 2.4 m high and require a sliding gate approximately 1.4 m wide. The tree will be removed prior to job being done. - Due date: Flexible

Side fence between 2 properties; good access from front (external passage) and rear laneway. I can remove the old fence and posts so the space will be cleared. Approximately 8-10 metres in length, normal post & rail timber paling construction will do. - Due date: Flexible

Hello, I need a few panels repainted and the bumper repaired.

Replace existing boundary fence with 2.1mtr fence - Due date: Flexible

Installation of shade cloth to a chain metal fence of a building site in Collingwood. Zip ties for the installation will be provided. Shade cloth to be erected on 3 fences of widths: 40.7m x 2 fences 17.96m x 1 fence - Due date: Before Saturday, 12th Feb 2022

Remove and dispose of post. Hand excavate for footing. Supply and install the following; 1x Concrete footing. 1x New 100mm rough sawn post. 1x New Post Capitol (turned top). Sand and paint side gate, including new post (approx. 1m by 2m)

Require 2x 6.9m long retaining walls with 1.9m fence on top. Sloping property, with retaining wall required to be about 600mm at its highest. Job needed to be completed when bulk excavation occurs (approx 4 weeks away). Have attached site, and example of fence and retaining type we would like. Fences will run down either side of property

In need of my front fence to be cut and re-installed as a fat. Have attached current fence and example of what we would like done. Property is being subdivided. Potential other work for a contractor that can supply and install matching fencing

I have a side gate needing repair. It is currently two steel posts, one with a gate hung on it, the other with the latch. Because of seasonal ground movement, the posts often move, putting the latch out of alignment and making it unusable. The repair i would like done is to brace the posts with a new top beam to keep them square. The full job is: - remove gate and latch from posts - ensure posts are cut to equal height - supply and weld new top strut to ensure posts are square - re-hang hinges and gate (it will need to be slightly lower to allow for the new strut. - reinstall catch aligned to lock. - fill any old holes with filler and sand back - paint to finish ( paint will be supplied)

Hello. I need someone to please remove current wire fence and build new picket fence with two gates/entry ways. Approx 7.3m wide and 1.2m tall. Pictures include current condition and a pic of what I would like it to look like except with an extra entryway. This person would need to buy the materials as well. Please post offers. Would like it done before Christmas. Thanks

Need a gate supplied and installed. Brick wall on both sides to fix to. Gate needs to be 1.7+m high. Needs a latch so it can be locked. Need job done ASAP, width to be supplied tonight, but is approx 1.4m. Fixed panel and pre-fab gate would be perfect.

Needing to make way for a new fence and needing these bricks and part fence removed and taken away. Bricks are embedded into ground and need to be removed forcefully (ie crowbar / hammer). Also want pre existing posts and concrete removed.

Put wooden gate door on side of fence. 1 meter length gate door . Using existing wood from dense o ly will need a stump concrete and hinges etc.

Hi A’tasker A Team, Looking for an experienced fence contractor with ability to guarantee work to install a steel fence with sliding gate. Fence is already purchased we just need someone to erect it. Thanks! (Hoping to have it done before June 30. Please be in contact ASAP!) See photo attached.

I have hardwood screens that need to be installed on a 4500mm X 2400mm fence a frame needs to be built I have the necessary wood. Then I have another smaller fence that just needs the screens drilled onto them. This is for a very small courtyard and two of the three fences. All wood available, screws etc required for installation. This could be done over the next two weeks but at one sitting

Currently have a gate at the back of my property (see photo), want to replace it with a fence that fences in my entire property. New fence will be 1.5m on one side, and 4.14m on the other side, and 2.1 m high. If you want to use the timber from the gate I'm happy for you to do so. I will paint the fence myself.