Find experienced local fencing contractors near you

Job detail: 1: dig two holes 0.6m deep 2:Concrete 2 posts in ground 3: attache the 1.8 m high gate on the post with hinges . 4: Install the handle. All the posts , gate, hinge , handle are on site.

I have a wood garden gate with a latch on inside and a lever on the outside to open when not Locked. I need to have groove cut so that I can open the gate from the outside with the key when the gate is locked with a padlock

Put up wood fence............

Garden Fencing in front of home. I will purchase the materials. Just installation. approximately 20 meters

Remove existing dilapidated brushwood fence and replace with 1200 h green coated metal tubular fencing similar to other existing fencing on property. Main run is approx 10m with 3m return. Return section from boundary to house to include a pedestrian gate. Access is available from both sides. Task includes removal and clearing away of existing fence, installation of new posts with concrete footing. 2 photos show existing brushwood fencing and other fencing on property 2 photos are examples of fencing type required, - current fence has ‘fleur de lis’ tops but these are not prefered for new section

Replace 2 sections of fencing similar to existing fence. • horizontal treated pine slats 65mm/12mm gaps • remove and recycle existing fence • painting not required • photos attached with details and measurements Please include cost of labour and materials in your offer

We have a 1.8 x 0.6M wooden garden fence panel on our balcony that needs to be securely attached to the concrete wall, probably with 4, maybe 5 anchor points. A photo of the panel and wall piece is attached.

Latch on garden gate needs to be replaced. I have bought new latch so its just the labour

Need to replace the lock of backyard garden gate. Pics see below.

W'e're looking for an experienced handyman/carpenter to relocate a garden gate. * Remove existing gate and fence section from current position (photo) * Re-install the same gate a short distance away (see photo of plan) * Re-hang and level the gate so it swings and latches properly * Re-install or adjust hinges/latch as needed * If required: install new fence section and/or set posts in new position (happy to cover cost of concrete and materials)

Looking for someone to attach our garden gate. The fencing people attached the hinges to the hollow post without a timber sleeve or anything for the screws to grip into. The screws came loose in the wind over time until the gate fell off. You will need to provide the wood.

Build a basic fence around my veggie garden to prevent deers and wild life eating the produce

We have three 1x1m fake garden walls that need to be attached to a wooden fence. There is also a potted hanging plant that we’d like moved. Will need own tools.

One of my timber retaining wall posts has failed and needs to be replaced. I’ve already removed the old rotten post (see photos) and taken measurements to assist with quoting. Please: Supply and install 1 new treated post Secure post to support the upper sleeper beam and stop further collapse Must be structurally sound and weather-resistant Preference for someone with landscaping or carpentry experience

Erect colorbond fence around my new home

Hi guys, One piece of my raised garden retaining wall timber is rotten, and need replaced! Need you to source and replace for me. Timber size is 2310mm * 200 mm * 55mm Please see pictures

Pour concret slab ( or a mix of slab and pavers ) to consolidate garden fence. As per the picture, the concrete around the fence’s posts is now above ground. I’m open to any other ideas. Please supply all materials.

My small garden has a wooden fence and several of the planks are falling off. I reckon I need less than 1 hour of a handyman's time to nail the planks back where they should be. Have received a quote for a colorbond replacement but WOW that's expensive! So looking for a cheap quick fix.

My dog is trying to dig under the fence to escape - wanting to somehow secure it.

Hi there, We have just rendered and painted our external wall and had to remove our garden gate in the process. We have restored the gate and now want to reinstall. The brackets are very old so we may need to buy new hardware and a lockable latch. We are away and have Airbnb guests coming Sunday. We would love for you to go and look at the gate to see what hardware is needed, then go to Bunnings to purchase, the come back to install. We will of course pay for the required hardware. Would love for you to install tomorrow :-)

Relocation/replacement of garden tap, shifting it approx 500mm away and up against a new fence post. The existing pipe is shallow and currently runs right past the post

Just moving into.a flat and I need 2 basic dog fence/gate at each end to keep him in and safe. Nothing to expensive or fancy as im on a pension.

Fabricate / Weld custom site access frame and gate as per attached design. Supply all materials. Steel to be HDG Please discuss with me suitable steel thickness before build. Gate to swing both ways

Build an area for my dogs to play while being protected by snakes

We have a partially built dog fence, star pickets are in place and the first role of dog fencing is attached but two roles to go. Also we have a gate that needs to be fixed.

I need to build pet enclosure in backyard - timber frame - wire on side (i have it) - colorbond roof (i have it) I need it done soon

I’m looking for someone to put together a fence around the side of the house. Roughly 3m long. Made from star pickets and mesh dog wire.

(Negotiatiable on price) I need a section of my backyard fully fenced and snake-proofed for my two miniature dachshunds. The area is a narrow strip beside my house (see attached photos) — the ground is mostly dirt with a few uneven spots, rocks, and existing partial fencing that may need reinforcement or replacement. Requirements: • Install secure fencing around the section to keep dogs safely contained. • Reinforce or replace existing mesh where needed. • Make the area snake-proof (fine mesh or barrier along the base, sealed gaps, etc.). • Ensure the fence is dig-proof and escape-proof for small dogs. • supply materials (at my cost) Bonus if you can: • Level out the ground slightly • Add a small gate for access. Location: Laughtondale, NSW Access: Easy vehicle access, on rural property. Photos attached for reference.

Hi! We need help reinstating part of our back boundary fence and making the property secure for our small dogs. Photos included. What’s needed: 🔧 1. Reinstall approx. 7 metres of corrugated fencing sheets These were removed by the previous owners. All 7m of metal sheets are on-site and ready to reattach. 🔨 2. Supply & install 1 metre of new metal sheeting To complete the full span. Standard corrugated sheet is fine. 📏 3. Replace or install posts if needed One or two posts may need replacing or resetting for support. 🐶 4. Dog-proof the reinstated fence Secure sheets and close gaps so small dogs cannot squeeze through. 🚪 5. Install a barrier under the front gate (urgent) Simple attachment required so our small dogs can’t get underneath. We provide: - The 7 metres of existing metal fence sheets - Clear access to the yard You provide: - Tools - 1 metre of metal sheeting (can inspect the fence first if needed) - Any posts/fixings - Material for the gate-bottom barrier (timber/metal/mesh — whatever you recommend)

I’m looking for someone who can supply and install a temporary dog fence for my outdoor area. The space is 228cm wide, and I’d like the fence to be around 1 metre high (or slightly higher if possible) to stop my dog from getting through. Just something sturdy, safe, and suitable for short-term use. Please let me know your quote, availability, and what type of fencing you can provide or that I would need to purchase (Inspiration photos attached)

Would like to dog proof the fence. Just moved into a new house

Install dog boundary invisible fence to stop my dog digging out under the fences . After someone who specialises in these installs. Flexible budget

We have fire fencing/ poles that are needed. Just need people with tools, and time to do it

Small back yard with three fences

Finish putting together steel Dog kennel. Needs an impact driver.

Need new cattle fencing installed - 100m on one side and 200m on another place of the property. Need someone to do it all.

My dog is trying to dig under the fence to escape - wanting to somehow secure it.

I will need to have a wire barrier installed underneath the house, to keep the dogs from getting out. I have two metal gates which might be good option, they will need to cut to size. It will need to be secured to the piers.

I have the fence and most of the materials including the gate. I just need it all put up. I’m happy to go get any more materials needed. There’s also a wooden gate one the other side that I want to ensure is secure. This is all to keep dogs secure. I need to not damage the garage though in any way.

Make a proper door for dogs between 2 unit .

3 metres width Colourbond gate needs to be replaced with something less expensive. The gates are damaged. This area is prone to high wind.

Replace panels of colourbond fence - View all the details of this offer: https://www.airtasker.com/offers/01KCAQSX8WKQFJ4M4SA6F6FP8E

Need to erect 30 meters long color bond fence in my backyard Type of gardening: Other Size of garden: 150m²-300m² Has green waste bin: Yes

Install a decorative / Privacy fence topper on top of an existing Colorbond fence, similar to the reference image provided. The existing fence is already installed and in good condition; this job is for a top extension only, not a new fence. Total length is approximately 15.6 metres, with a preferred extension height of 300–600 mm. Panels are to be aluminium or steel, powder-coated for outdoor use, and securely fixed to the existing steel posts or an appropriate mounting frame, with a neat, straight finish and colour to match or complement the existing dark grey/Monument fence. Supply and installation preferred (open to discussion). Site has level ground, clear access, flexible timing, and the contractor is to provide a complete quote covering materials and labour.

Colourbond fence post has rusted though at the base, cashing fence to swing in the wind, repair required asap

I have two panels of colorbond fencing which are 2400mm in length each. I need an extension fitted to each of them to increase the height of each by approx 400mm. The extension is to be of slat type colorbond material of the same color. I have included photos of the fence panels and an example of the slat extension.

I need 3 colorbond fence panels replaced (supplied & installed). They are a standard colorbond colour although I'm unsure which. Located in Killarney Vale (Central Coast)

I am replacing an old timber fence. I require a quote for a replacement fence in colourbond. The fence is 31 metres in length and is 2.1 metres in height

I require both gates renewed, push down rods on both and a lock that is simple & works

Close gap in fence with colourbond sheeting (already have). About 50cm x 100cm space

2.1 metre high Colourbond fence - 4 metres section , damaged by fallen gum tree ( tree now removed ) . Have purchased new Colourbond fence panels with sheets rails posts and screws . Just require installation only . Must have fencing experience

One fence panel needs fixing

Need 8 l/m fencing installed at my gravatt. 3 holes dug all materials onsite incl rapid set 2-3 hours work

The sheet of colourbond has come away from the frame and need it either fixed or replaced asap . Happy to negotiate

One colourbond panel needs to be removed and replaced with new one. Panel will be provided. Labour only

We have an existing 17m wooden fence which is falling down. I need someone to remove (and dispose of) that fence and install a new Colourbond fence (also 17m). I've bought the fence already, but will need you to supply concrete etc for the posts

Will need to carefully remove existing post footings which were cemented in after the Travertine tiles and brick fence behind (see red arrows in picture attached on posts to replace) - may need small jack hammer or hammer drill. Then install both new posts and re-attach fence.

I have a matrix fence extension and the legs for assembly. I need someone to attach it to the fence top. Length is only 2400mm

The Colorbond side gate needs to be narrowed or replaced as it does not close properly. The existing gate is 180 x 88 cm. It needs to be slightly narrower so it can close. The new gate needs to be lockable. The colour needs to match the fence.

TO REPAIR FENCE AND RETAINING WALL BY DIGGING OUT ONE composite SLEEPER BAY AND Put new BRACKET TO POST REMOVING FENCE FIRST AND REASSEMBLING AFTER BACKFILLING AS ABOVE As attached photo