Find trusted local electricians in Hornsby

Need an approved electrician to change a switch. The middle switch in picture has stopped working and need it to be replaced.

I’m looking for a licensed electrician to securely refit one loose double power point to the wall. There is a visible gap above it and some damage/cracking around the wall opening. Please see the attached photos. The job includes: - Inspecting the mounting and fixings, and securing the power point properly. - Supplying and fitting a slightly larger compatible cover plate or backing plate if needed. - Repairing and sealing the surrounding wall gaps with suitable materials, including acoustic sealing where appropriate. Noise from downstairs seems to be coming through this area, so I’d like to reduce sound leakage. - Checking and testing the power point after the repair. Please confirm that you hold a current NSW electrical contractor licence and can also complete the minor wall repairs and sealing. Please include labour, materials and any call-out fee in your quote, and let me know your availability.

Hi, I need a double power point with silver facing installed on a gyprock wall that has power points on the other side of the wall.

We’re looking for a licensed electrician to diagnose and hopefully repair an electrical issue with our older-style electric cooktop (not induction). The issue: * The dedicated cooktop circuit breaker keeps tripping immediately whenever we try to switch it back on. * The main safety switch (RCD) isn’t tripping, just the cooktop circuit breaker. * We’re unsure whether the fault is with the cooktop, wiring or circuit breaker. We’re hoping someone can investigate the issue and ideally fix it during the same visit, assuming it’s a relatively straightforward repair. Please provide your availability, call-out/diagnostic fee and hourly rate or estimated repair cost. Thanks!

I need a Power Point installed in my 'office' wardrobe by an electrician Refer to pictures

we are running out of hot water because the new tenants in granny flat. currently 9ppl live under same roof and all depends on an old 315L electric hot water tank. My preferred model is Haier 330L because of its good reputation and value. Current HWS just next to the smart meter box so it's a very easy replace & installation. after price match online and double rebate I think its doable.

Install an exhaust fan in our toilet. We do not have a fan currently in our bathroom, we need help with installing a fan and ducting would also be required. I believe we would need an additional switch too.

My Rheem water heater has some issues. It starts heating when hot water side of tap is turned on but in few seconds it gets disconnected and shows an error of 65.

I require a Level 2 electrician to upgrade my existing meter board from single-phase to three-phase. I'm happy to arrange inspection if required. 1. Ausgrid Application & Compliance * Lodgement of Ausgrid paperwork for three-phase upgrade. * Final certification. * NOSW (Notice of Service Work). * CCEW (Certificate of Compliance for Electrical Work) paperwork. 2. Three-Phase Service Connection * Install new three-phase aerial service from the Ausgrid pole to the private pole on the client property. * Insulated piercing connectors for the live Ausgrid service. * IHouse service connectors on the private pole. * All work to be carried out in accordance with Ausgrid rules and regulations. 3. Consumer Mains Upgrade * Install **two additional 16 mm² XLPE copper consumer mains cables** from the private pole to the switchboard enclosure. * Route the cables through the existing underground conduit beneath the driveway. * Remove one existing cable. * Install a draw rope. * Pull the two new cables through the underground conduit. * Connect the new **B and C phases** to the meter protection fuses. * Install **2 × 80A HRC fuse wedges**. 4. Switchboard Upgrade * Upgrade the existing main switch to an **80A three-phase thermally protected main switch**. * Install a new **12-pole switchboard enclosure**. * Provide spare capacity for future solar installation. * Install provision cabling inside the new enclosure to support future solar connection. 5. Circuit Reconfiguration * Reconfigure the existing electrical circuits across the new three-phase supply. * Upgrade **7 existing circuits** to **RCBO safety switch protection* * All work to comply with **AS/NZS 3000 Wiring Rules**. 6. Meter Coordination * Liaise with the electricity metering provider to arrange a same-day three-phase meter replacement * If a same-day meter swap is not possible * Remove the existing meter * Leave the installation ready for the following day's meter installation by the electricity retailer

I have a Rhino Rack roof rack and want the kings 300w folding solar installed, I have the brackets just dont have the time to install it. https://www.4wdsupacentre.com.au/300w-folding-solar-panel.html

Repair LED TUBE LIGHT for kitchen

I want 6.5 KWh Solar Panels insllaed at my place in Hornsby

Looking for a licensed electrician to install lighting in our back garden and install a new pool light. We currently have one outdoor power source located approx. 1.5m from the pool edge, and would like power run from this point to install around 5 outdoor garden lights. We also need a new pool light installed. We are unsure if the existing wiring to the pool light is working, so this will need to be checked and made operational if required. The pool is currently drained, so access is easy. Location: Hornsby Flexible with timing over the next few weeks. Please include license details and a rough quote.

We have a single pool light that currently is not working. We need an electrician to come and change the light fixture and get it working again. It looks like it might not have been working for a while. Our pool is currently drained for access. The wiring will need to be investigated.

Move PowerPoint inside the acoustic box. ASAP Address: 18 ethel street, hornsby

Disconnect oven(hardwired) , switch off power for demo and create a Power point switch where the light switch is. Oven is already isolated as per the board

Licensed electrician needed – underground cable + power points + lighting (Hornsby) Looking for a licensed electrician to help complete electrical setup for a new shed. Location: Hornsby, NSW Scope of work: - Run two underground conduit cables (~15 metres each) from the house electricity box to a new shed - Trench is already dug for most of the run (may require a small amount of additional trenching depending on your advice - labour available onsite if needed) - Install 2 internal power points inside the shed - Install 1 external power point - Install 1 internal shed light with switch - Install 1 external shed light with switch - Set up wiring so the external shed light can also be switched from the house (reason for the second conduit run) Materials: - Conduit, cables, power points, lights and switches will be supplied. - If additional materials are required, we are happy to reimburse. Access: - Easy access to the site - Happy to assist with labour if helpful Timing: - Ideally this weekend - Otherwise early next week during the week Please confirm: - You are a licensed electrician - Your availability - Approximate quote or hourly rate Happy to send photos of the trench and shed if helpful.

Looking for a licensed electrician to replace 4 light switches: • Replace 2 existing dimmers with new dimmers • Replace 2 existing 1-gang switches with new switch + dimmer units All wiring already in place. No new circuits required. I will supply all new dimmers and switches. Licensed electrician only. Please include licence number in your offer.

Building a 4m high wall to wall off a loft that overlooks the living room. Have a quote for someone to build a wall with a door. Want a quote for installation of a light switch on the door and two power points. There's currently a light in the room with a switch near where the new switch will be but it's outside where the room will be. Attached photos are the loft where the wall will go.

No scammers please. I need L2 Mains/meterbox upgrade and electricals done as described in the image by licenced electrician for the entire house. I need electrical done by licenced electrician for a house getting renovated in Hornsby. I had already hired one electrician from facebook marketplace. He started work and cabling was done but now he is blocking my calls after getting most of the money. I need this done asap.