Find trusted local electricians in South East Melbourne

Kings 2kVA Inverter Generator (https://www.4wdsupacentre.com.au/adventure-kings-2-0kva-inverter-generator-2000w-continuous-power-rating-2200w-peak-power-rating-2yr-warranty.html?srsltid=AfmBOorQVdSz8CEkauK5VQUbmrZX6LGfMEtWJsND6d0hbtx5IeoN-I5b). Not starting and looks like fuel primer bulb issue but maybe something else. I will strip the outer panels down for faster repair time

I need a power point added to ceiling near a light .roof is cluttered with ducts but I believe the nearest power line around 2-3 meters away. I have the slimline power point and 2.5 mm power cable , also junction box

Solar water heater panel leakage from under the solar panel

Hi, I need electrician to install 3x power points, 1x 3 gang data point and get it connected to 2 other devices, single story house

The pipe for the pressure release is slowly trickling water. Releasing pressure valve does not stop the water discharging after. Likely valve needs replacing, refer to image of current valve.

I’m setting up a home gym in my garage in Wheelers Hill and looking for a licensed electrician to assess and organise the electrical setup. The job includes: * Checking the existing electrical supply can safely handle the planned air conditioning, gym equipment and lighting * Adding enough conveniently positioned powerpoints so I’m not relying on extension leads * Installing suitable gym lighting and switches * Installing a split-system air conditioner, including any required electrical circuit * Testing everything and providing the relevant completion certificates I’m after a practical, cost-effective setup. The garage walls will be panelled, so I’d like the wiring and outlet locations planned before the panels are installed. Please state whether you can complete both the electrical work and split-system installation with the appropriate qualifications, or arrange a qualified air-conditioning installer. I’m currently gathering quotes. Please itemise the air-conditioning installation, powerpoints and lighting separately, and state whether the air-conditioning unit is included or needs to be supplied by me. A site inspection can be arranged.

I would like 2 internal wall lights installed. 5 wall switches relocated. The relocation won’t need additional cabling. Just move back the wall switches about 10cm allowing space for my renovation job

I’m looking for a licensed air-conditioning installer to supply and install 2 split-system air conditioners at my home in Cranbourne East. ❄️ Air conditioners required 1. Large open-plan living + dining area Approx. 7 kW capacity Large area, so happy to take your professional recommendation on the exact size/model. 2. Master bedroom Approx. 2 kW capacity 💰 Looking for a competitive package I’m looking for the best overall supply + installation price

need a qualified electrician to install a ceiling fan. i will provide the fan. there is an existing ceiling fan in the room that will need to be removed first. i will need a certificate of compliance, do not apply if you are not a licensed electrician. this is the fan and i have connected the blades to the motor: https://www.bunnings.com.au/brilliant-132cm-white-matt-grace-4-blade-dc-ceiling-fan-with-remote_p0332326

install 10 downlights on eaves on two side sides of the house. Existing switch and one existing light outside can be used as the source of power. Replace two internal switches with dimmer switches. dimmer switches available only need the installation. Will need to widen the hole in the door trim to fit the dimmer switch. small house so not a lot of wire will be required. Look into the attached plan to see where these new downlights will go to estimate your wire cost.

Looking for a licensed electrician experienced with EV/Tesla charger installations to install a Tesla Wall Connector at my home. I’ve attached photos showing: * Existing switchboard * The brick wall where I would like the Tesla Wall Connector installed. The charger will be mounted externally on the brick wall shown in the second photo. The switchboard/meter is located outside the front door, as shown in the first photo. Job includes: * Install the Tesla Wall Connector on the wall * Connect it to the existing switchboard * Supply any necessary materials * Test the charger and make sure it is working safely * Provide Certificate of Electrical Safety (COES) upon completion I will supply the Tesla Wall Connector.

Licensed electrician required for a rental property in Narre Warren South. Work required: - Install/replace 2 hardwired smoke alarms - Replace 2 light switches - Remove the faulty existing patio light near the garage and install 1 Arlec LED batten light on the patio beam - Test completed electrical work I will supply: - Clipsal 755PSMA4 smoke alarms - Tesla light switches (1 gang into Kitchen, 2 gang into Laundry) - Arlec LED batten light Need a Certificate of Electrical Safety (CoES) as its a rental Please only offer if you are a licensed electrician and can complete the work on or by Thursday 10 September 2026.

Change 3 old dimmer switch to normal switch. Change 1 old fluorescent tube light fitting with a standard LED light fitting. We will provide all switches and light. Everything install on same location

Install pendant light in dining room

Hi, I’m looking for a licensed electrician to install hanging/pendant lights(total 3 numbers) above my dining table. The lights are already purchased — I just need them installed and connected to the existing electrical supply. Thanks!

“A power plug and power point are required for the cooktop.”

Wall switch does not press down to turn on

Looking for a licensed electrician to replace a broken Clipsal light fitting/batten holder. The existing fitting is shown in the photos, along with the replacement fitting. This should hopefully be a straightforward swap using the existing wiring, followed by testing to make sure everything is working safely. Job: * Remove existing broken light fitting * Install replacement fitting (provided) * Connect to existing wiring * Test and confirm light is working correctly * Replacement fitting is already available/pictured Timing: ASAP preferred. Available today/tomorrow if possible, otherwise Monday–Friday next week (24–28 August) works well. Please bring any tools/equipment required and be appropriately licensed for electrical work.

Urgent – Electrical Works for Study & Built-In Bar Looking for an electrician to complete the following works: Photo 1 – Study - Wire/provision 3 x double GPOs now - Return after the study cabinetry is installed to finish/install them - Remove and cap off 1 existing GPO in the corner, as this area will be enclosed by the new cabinetry Photo 2 – Built-In Bar - Install 1 x surface socket at the top - Install a switch at the marked position to turn the surface socket on/off - Finish off 1 x double GPO where wiring has already been completed Photo 3 – Separate Room A new backboard will be installed Bring the existing GPO shown in the photo through the new backboard and finish it off Backboard cut-out will be done by the cabinet maker Other details - Single-storey house with roof access - I will provide 4 x double GPOs and switch - Please allow to supply 1 x standard double GPO - Ideally looking to get the initial works completed this Friday, or over the weekend if that suits Please advise availability and quote.

Looking for a licensed electrician to remove an outdoor ceiling fan from my verandah/pergola. The verandah is currently being dismantled, so I need the ceiling fan removed and the electrical wiring safely disconnected/terminated so the remaining frame can be removed. Would ideally like this done as soon as possible.