Find trusted local electricians in Berwick

To check the two power points

Electric break system installing to trailer Trailer plug replacement in tipper Existing Reverse camera need to fix in tipper Landcruser 80 series after market central locking system need to fix

Need to replace 20 old down lights with adapter

I need to get 3 things installed- 1. 3 pendant lights on bulkhead in kitchen. Already wiring done by builder. 2. TV 55 inches mount on wall, electrical point already there. 3. 2 pillar lights outside, point provisioned already.

Seem to have a leak on the water heater inlet pipe.

We have a 240 volt caravan that we were wanting to get the lights (roughly 10) changed to 12volt and leave the rest of the caravan 240volt

16x old downlight replacement to LED downlights. 2x new pendant installations including switches

I have 2 switches that are faulty, one is the switch to turn on the hotplate ( picture attached) and another switch can’t be turned off.

How much to install power point a power point need 1 in powder room and 1 in kitchen ?

I have a few jobs for an electrition I have saved up: See attached images for further details. 1. Three outdoor lights to be replaced. I have purchased the replacement lights. 2. Remove wiring from sound system, and reduce from 4 double plugs to two. Also need to explore options for relocating the router/internet port. 3. Add PowerPoint to cupboard. 4. Check and fix 360 sensor, has issue were lights only flash on with motion, they don't stay on. Please note, any work must be carried out by a licenced election and a certificate provided on completion of works. Any questions or additional photos please let me know. Thanks!

Currently DSL port for internet at front of house. ISP plan is FTTN. No NBN box installed. Would like cabling and wall connection re routed to different room in house as all my devices will be hardwired to the modem in a single room.

Looking for a Sparky (Electrician) for removing light fittings in 3 rooms and from Alfresco and then putting new downlights from bunnings. Total 11 downlights to be installed (and existing ones to be removed, you can see image of existing lights). I will buy these downlights from bunnings - https://www.bunnings.com.au/mirabella-9w-750lm-rgbw-ip44-1-2m-flex-plug-genio-smart-wi-fi-dimmable-downlight-4-pack_p0361945?store=6437&gad_source=1&gclid=CjwKCAjw5qC2BhB8EiwAvqa41nJWmMolgSods4OrXdauuYJ1bcqDHTPUnxFoj2RNrgesgPBQqzVodBoCdNwQAvD_BwE&gclsrc=aw.ds But require your help to uninstall, install and do any wiring that may be needed, including anything else needed to make these work with existing connections. Plus 2 switchboards have some loose wiring. Just need to check and tighten those wires. That will require opening the switch board, fixing loose wiring and replug the switchboard.

I require a 32amp 3pin plug supplied and installed. Must come with electrical certificate. It is to be installed close to power box

We require a licensed electrician to remove a speed controller and just bypass into a single switch. Fan will just stay on full. Require this done today if possible. (4.5amp fan )

Install power point in wall for tv. Able to access from roof space. No current power point on that wall but at other end of bedroom and also in the adjoining ensuite there is power.

Need an electrician to change the exhaust fan and bulb combo in bathroom

Need 10 down light installation. Down light provided. 90 mm cutout. Single story

Need 1 X GPO connected. Cable has been run, just needs location moved up for the new microwave location. Need another gpo moved from its current location into the cupboard next to it. Photos show both areas. Ideally need done Wednesday the 10th or Friday the 12th.

Two broken smoke alarms. Would like to get them replaced ! Located in Berwick. Flexible timeframe.

Need a handy electrician to disconnect, dismantle, transport to a new address, reconnect and put back together. It's only a short distance. Berwick to Berwick