Find experienced local carpenters in Thornbury

There is a leak underneath our sink that happens to be right above where the dishwasher is going. We need to get it fixed (leak proofed) before our dishwasher is installed. The water has damaged some of the wood and the screw clamp has come away which is allowing water to come through. Needs to be done asap. See pics

Make cabinet smaller by approx 200mm

Make cabinet shallow $10

Here’s a polished Airtasker post: Built-in cupboard modification – reduce depth by approximately 20 cm We’re looking for someone to modify an existing built-in cupboard to make it approximately 20 cm shallower, as it’s currently too deep and narrows the walkway into the room. The job would involve: • Cutting approximately 20 cm off the depth of both side panels. • Shortening the top panel. • Shortening each internal shelf from the back by the same amount. • Reassembling/refitting the cupboard so it looks neat and functions as intended. Ideally, we’d like the cupboard to be modified in place without removing it, if possible. However, if you think it would be easier or result in a better finish to remove the cupboard, modify it, and then reinstall it, we’re happy to consider that approach. Please let us know if you’ve completed similar cabinetry modifications before. Thanks!

Furniture assembly and weatherboard replacement

I need an original built in wardrobe removed/disposed of and skirting boards and cornices replaced. I can't see the ceiling or wall behind the wardrobe. They may require plastering/rendering. 70's style brick build. Doesn't need to be painted. Prefer someone who can do the entire job. Image attached. I need this done ASAP. Thornbury location. Flexible times.

I’m looking to add an extra cabinet to the left side of my existing cabinet. Exact same layout some colour and hardware. I also want the door reversed on the left cabinet so that they open together. Exactly like the right side

Details: Outer dimensions: 120mm x 120mm Internal opening: 100mm x 100mm Frame thickness: approx. 12–15mm Total height: approx. 25–30mm Internal cavity depth: ~15mm Key requirements: A small internal ledge (approx. 3–4mm wide) for a 3mm acrylic panel to sit on Clean internal walls (for LED strip mounting) Smooth finish suitable for light sanding/painting Small hole in the back or underside for a power cable Material: Open to MDF or plywood for initial prototypes (cost-effective preferred) Quantity: Initial prototype: 2–3 units Ongoing: likely batch production (20–100 units depending on demand)

The deck that came with our house was poorly finished. It needs the old finish stripped and a new finnish applied.

Period window needs to be replaced, the frame has rotted

I have a wooden sliding door between kitchen and laundry that needs to be trimmed at the bottom so it won’t scratch the new floors

- Need approximately 9 lineal metres of FJP skirting supplied and installed to plasterboard in garage - Need short staircase built in garage, threshold and stairs to be fully clad in engineered timber flooring supplied by myself. Would like cuts mitred if possible. Need the task completed between 28/01 and 30/01

I’ve got a merbeu deck which is 1205 x 3200 plus 2700 x 1350 which needs to be sanded and stained. I can supply the oil, but all other equipment will need to be by you.

Hi, I’m looking for a carpenter / handyman to build a simple timber bar-front on my deck to hide gas bottles under an existing stainless steel BBQ table. Scope of work: • Construct a front-only timber façade (no sides, no doors) • Fix to a small timber sub-frame (sub-frame can be fixed to deck or table legs) • Clad with vertical slats to match existing decking • Purpose is to hide gas bottles from front view while keeping sides and back open for ventilation and hose access Materials: • Use Ekodeck Leatherwood composite decking (same as existing deck) • Vertical slats approx 45mm wide with 8–10mm gaps • Colour-matched screws or neat concealed fixings • Treated pine or similar for hidden sub-frame Dimensions: • Front width: 1530mm • Height to cover: approx 620mm (deck to underside of stainless bench) • Leave small shadow gaps top and bottom (approx 5–10mm) Important notes: • No full cabinetry or enclosure • No doors • Sides must remain open for gas hose access • Clean, minimal, modern finish Happy to supply reference images. I will order the materials but these will need to please be collected from Bunnings (5mins from my House) Please include labour cost and estimated time to complete. Thanks!

Build and Install a shelf 20cm x 4.5m supported on white metal brackets - shelf white as well as per photo attached

I need all the materials measured out properly And make some like shelves in the shed and some ramps so it’s not steep for the rabbits to run up and down

3x 2.5m dense hardwood sleepers (very heavy) need 4 cuts each. 1x at a specific length, the rest just cut into manageable sizes to lift. I have crowbar/extra wood for lifting to height. I can also assist if times match.

Supply and fit Hume timber external door 1020*2040 door. Already an existing door in place that needs to be removed. New door needs to be trimmed to fit. If you are able to also fit a single action lever (single barrel) please quote on that also. Fitted to existing timber frame.

Two cat urine stains…only new stains have soaked into the floorboards rather quickly. Need assistance removing professionally. Flexible in price, not sure what this would cost. Just need it fixed

Measure, design, qoute & install 4 wardrobes to be functional with hanging & shelve space