Find experienced local carpenters in Newport Beach

I need a new Vuly Ultra trampoline constructed straight out of the box. The location is a groundlevel wooden deck space (no railing around it) that is slightly bigger than the footprint of the tramp. The boxes are stored in easy access also on the ground level.

I’m looking for a builder to build a custom a microwave box in our kitchen cabinets and a shelf beneath it.

Nice old pool table needs replacement of the felt as its tired and worn. Separate top over the timber base is very heavy. 7foot table. Felt is not supplied. Medium quality and speed is required. Please quote felt to be supplied separately. - Due date: Flexible

I need to install 5 new timber doors and handles in an aluminium door frame with hinges (hinges are welded to the jamb). Doors will need to be trimmed slightly bottom and top to fit. And approximately 50 l/m of skirting boards. It is labour only, material will be supplied. Of course you need the tools :) - Due date: Flexible

I am looking for someone to supply & install high quality lifeline netting to my boat. The vessel is 45ft long. More images can be provided upon request. - Due date: Flexible

Build the Lifespan Spring garden playcentre from flat pack and attach anchor points. Garden is on slope and so there may need to be some digging to sink a few of the poles into the ground to ensure the Playcentre is level. Below is an image of the Playcentre finished. And link to website is here: https://www.lifespankids.com.au/collections/swing-sets-play-centres/products/springlake-play-centre-green-slide - Due date: Flexible

I have had a commercial freezer delivered to my dog grooming salon that wont fit through the door properly. I need someone to take the front door off and help us get the freezer into the salon. The door will then need to be put back on - Due date: Flexible

some timber cladding on side of house some timber decking and tiber post replacement on side of outside timber steps - Due date: Flexible

Dinner plate sized stain on carpet. Need to get removed. - Due date: Needs to be done on Sunday, 11 June 2023

Re apply stain to backyard decking. - Due date: Before Wednesday, 25 January 2023

I need a new kitchen pull out bin installed into a kitchen cabinet. Screwing in will be needed. - Due date: Flexible

Have a new shed purchased from bunnings still in boxes - Due date: Flexible

Needing someone to source and install additional cabinets in my apartment Second photo is my kitchen, the bench with stools. The other photo is what I am after, installing cupboards under bench - Due date: Flexible - Due date: Flexible

Please see all details listed with pics on images attached. We will buy all materials listed by tasker but don't have any tools. Job is for: 1)Waterproof in deck box for pool cleaner storage. - Due date: Flexible

I have a new fridge coming and unfortunately it is a couple of centimetres too tall for the current space so I need to reduce the size of the cabinet over the top of it.... Or replace it with a smaller cabinet. I am flexible with timing but the sooner the better.

Carpenter or very experienced handyman. Can be undertaken most days 1.These two internal sliding doors aren’t moving smoothly. One only needs slight adjustment, the other needs to be lifted and slid into place so needs more agjystment. We need them to run smoothly as they once did. These doors are recessed into the wall and have runners. 2. Our free range bunnies have nibbled the bottom of these same doors. File the bottom and putty into nice square edge ready for repainting (we will do the painting). The nibbled section is about 20 cm high and only a couple of cms wide

I need a measure and ikea kitchen installation. On strict budget Small kitchen Also need extra quote on a breakfast bar under the kitchen window. Handyman or carpenter locally would be spot on! - Due date: Before Sunday, 15 May 2022

Art project- Handyman or carpenter to help with simple design. Need a 1.2m diameter circular plywood piece cut out to sit on top of and extend an existing turntable - must also have an adjoining ramp (suitable for a wheelchair). The total turntable height will be 66mm, so the ramp needs to reach this smoothly. Castors may be required to steady the turntable overhang. Materials supplied and studio space in Newport to work out of.

We are looking to add new kitchen cupboard doors and a benchtop using Kaboodle.

Looking for someone who can remove the cupboard above the fridge space to make room for a taller fridge, then patch up paint (white). Don’t have access to post a pic - it’s a small cupboard, needs cutting out then patching up and small paint job.