Find experienced local carpenters in Mulgrave

Install a 3m x 2.25m Gable Roof Garden Shed Zinc / Tall - 2.35m- shed to be installed on non-concrete land scraping.

Make a display cabinet similiar to the example pics shown and then install it in a rectangular opening of the wall as shown in 3rd picture. The dimensions of the section is 2.2m length × 1.3m height. The width is 250mm. The design will be flexible, just an example shown on pics.

Absco 3x3 garden shed was a bit damaged during the last storm. Back an one side panel have been dislocated, I need to get them connected back and fit them as they were. Thanks. Pls see photos

Restain deck

I have a shed in my garden that I want dismantled and removed. Dimensions: 2200mm (width) x 1550mm (length) x 1800mm (height). The shed is perfectly fine (no damage) but we want to upgrade to a bigger (and different colour) shed. The shed is simply held together by Phillips screws. I want someone to disassemble the shed and dispose of it. We are in a townhouse and there is no access from the garden to the front so the shed will have to be dismantled and taken through our townhouse. Located in Mulgrave, Victoria.

Supply and install cabinets in kitchen and living room. Phots attached. Budget is guesstimate

Existing walk in robe is in need of x 2 wardrobe rails for hanging clothes. The Existing style which includes drawers in the middle and shelves on the side need to be taken out .

I recently had to replace an under bench oven and went from a 700mm to a 600 mm oven for my investment property - need the left hand side gap covered with an aesthetic stainless steel finish to complement the look of what’s there. In addition, I have a 2 glove IXL bathroom light that has a cover that appears to fall and needs to be fitted back on fixture with extra support & a fan cover which falls also - if we could that fixed back on with extra support so it doesn’t continue to drop - Due date: Before Friday, 2 February 2024

l Bought Bunning Shed - need assemble my backyard width is 3,0m. height is 2,0m - Due date: Flexible

I need a small decking completed. The subfloor has been done but the decking needs to be finished. The area is 2.1 x 3.3. All material will be supplied. It is Modeck with clips also supplied. There is a step to complete in the same material with subfloor already completed. - Due date: Flexible

IKEA Benchtop Installation (laminate) It is a U shaped kitchen, looking to have IKEA laminate benchtops installed along with sink and cooktop cutouts. Please note: The benchtop is running underneath some cabinetry in the corner, possibly need to remove that cabinet to be able to fit the benchtop in place.  - Due date: Flexible

I need a 900mm oven cleaned and the rangehood, it isn't too dirty. - Due date: Needs to be done on Monday, 16 October 2023

Hi there, I have this middle bench. I need to get all three legs trim down by 2-3 cm. The job is the shopping centre and has to be between 7:30-8:30am during weekdays. - Due date: Flexible

Hi, I need to repair a soft-close bathroom vanity drawer, which absorbed a lot of water and swelled a little. It is scraping on the sides and not closing properly now. 875mm x 370 vanity unit draw and face. - Due date: Before Friday, 8 September 2023

Merbau deck needing deck cleaner/sanding and then staining (oil based) Approx 5x7 metres - Due date: Flexible

I am planning to get a backyard deck built. Please let me know your quotes-also comment if you need more details. budget is only an indication value Deck area 3 m x 3m Type of decking I need shown in last two pics Update: Left of my deck is closer to easeman. So I need the builder to arrange council approval too.. - Due date: Flexible

Wardrobe timber came apart. Railing collapsed. - Due date: Flexible

I’m a handyman looking for someone who can help me demolish and remove an existing treated pine deck incl sub-floor followed by build/install new sub-floor with new eko-deck. Pic shows existing decking to be demo. You need to know what your doing and be able to work unsupervised if need be. All materials are to be purchased by the client and would like to pay you either a day rate or hourly rate. You must have your own tools preferably and be punctual and reliable. - Due date: Needs to be done on Monday, 7 August 2023

Inviting quotes for custom wardrobe installation in 2 bedrooms. Master bed has two sliding doors wardrobes facing each other. Need to remove the sliding doors and create open shelving to create a more spacious walk-in closet. The master robe walk-in will need installation of a sliding entry door to separate it from the rest of the bedroom. I have attached picture of how it eventually needs to look. Also need to create shelving in large 3 door wardrobe. Please share your best possible quote. (A range is OK) - Due date: Flexible

I’m currently looking for an experienced/professional carpenter who can help me demolish and old treated pine deck and re-build an Ekodeck. My best friend/carpenter has unfortunately recently passed away who used to help me and now I’m looking for someone to help me out. You must possess the knowledge to be able to work unsupervised and be hard working. The job should take anywhere between 5-7 days. Will pay an agreed hourly rate. - Due date: Needs to be done on Monday, 3 July 2023