Find experienced local carpenters in South East Melbourne

External laundry wall panelling installation, timber trim replacement (internal and external) and decking to be stained.

I need a medium sized Ikea kitchen cabinets installed. I need benchtops and panels cut and a hole cut for a sink and cooktop. Electrician + plumber will install the sink, cooktop and oven after cabinets are installed.

Need a professional to get the timber Floor polished/cleaned/colour correct professionally from urine stains completely Happy to accept a price you offer that matches the standard cost for these type of tasks Single story house Type of clean: End of lease floor clean/polish Equipment and supplies: Tasker must provide

Need to remove the left panel of the fridge cavity space as our fridge is slightly wider and doesn’t fit. My thinking is the overhead cabinets which are obviously supported by the side panel can be secured to the wall at the back which could allow us to slice off the left side panel and be able to fit the fridge in.

Doing a bathroom renno Looking to have 2 cavity sliders installed 1 dry wall to be frames to close the door way Frame a bench seat in the shower Cut the joists for a shower Some Demo work Cement sheet on 3 bathrooms including floors Replace a window Build pantry shelves Lay hybrid floor boards etc Deck restoration and new deck build Plastering Plenty of work for the right person for a long time Will do daily rate minimum 8 hrs a day. Advertised task price is for 1 hr

Joinery & Build Scope Budget: around $12,000. Happy to discuss and negotiate. Business & Liability Insurances required 1. Demolition • Remove one internal non-load-bearing wall (as per layout) • Remove 1 internal doors (same wall) 2. Frame Carpentry • Construct new MDF walls (e.g. for waxing room) • Supply and install all required framing hardware • Elevation for pedicure, 4 meter L, 1.2m deep and 40cm H, from of the stage 3 drawers equally divided and next to each drawer space for electric socket. The stage should be strong enough to support 3 people sitting plus the chairs Need to do plumber rough in before finalising 3. Plastering • Supply and install plasterboard for new walls • Patch and repair existing walls as needed • Install cornices (e.g. 90 mm Scotia or similar) 4. Joinery • Install kitchen base cabinet (Bunnings-supplied) • Install basin vanity cabinet (Bunnings-supplied) • Tile splashback installation for kitchen and vanity • Install shelving units (approx. 4 lm, 32 mm shelves) (Ikea / Kmart - Supplies) • Construct partition column wall 5. Fixing Carpentry • Fit internal swing door (1) • Install passage sets and door hardware • Install door architraves (67 × 18 MDF profile) • Install skirting boards (92 × 18 MDF, approx. 36.9 lm) 6. WPC Cladding (Or similar wallpaper) Installation • Indoor WPC cladding panels (1 wall) Outdoor signage installation Mhs M

Add kitchen cabinet overheads of around 655mm high and 340mm deep. Plain white in color.

Replace stained toilet seat Will pay cost of deat separately

There is a small water leak from the roof which has resulted in the water staining the plasterboard. Only issue is the leak is directly under the solar panels so ideally i need someone to go in the roof and seal it from the inside.

Pantry door, approx 2.5m high, with 5x hinges. 4x have screw fixings that have sheared off and threads are stuck in the door.

Need help handing an ikea wall mounted cabinet. Have tried and failed. Ive also run out of wall plugs to screw the bracket into the wall so someone who has a few of these already would be great.

Need merbau deck, stairs and wall sanded , cleaned and stained

Need to sand and restraining 4.4 x 7.5 deck and 2 coats

Build a 3 piece sun Lounge outdoor day bed. With frame and canopy. Can be built inside under aircon then carried out the back. (If the day is hot) Features Modular design offers versatile setups 0-90 Folding canopy UV-resistant frame with water-resistant cushion Heavy duty galvanised steel frame Comes with 7cm thick high density foam seat cushion Removable and washable cushion cover Specifications: Frame material: Galvanised steel Canopy material:Polyester Frame Canopy Seat cushion thickness: 7cm Lounge max. weight capacity: 120kg/unit Overall dimensions: 161cm x 180cm x 145cm Assembly required: Yes No. of package: 3 Package Content Gardeon Outdoor Day Bed x1 Assembly Manual x1

Looking for someone with interior design/cabinetry design experience to draft up plans/shop drawings for the construction of a built in corner bench seating with storage underneath. So that I can take it to a cabinet maker or carpenter to make it. If you know someone who can make these things, bonus! The back rest does not necessarily need to be connected to the seat part. Looking at approximately 2400mm L x 1600mm W with a depth of 600mm for the seat. Construction ideally out of wood and would love to hear options for a higher quality wood for the seat itself. Open to cushion on the seat too. Ideally we will find a 1800mm x 900mm table to fit with this built in seating. Floor plan and image of area are attached

Approx 4 x 12 area. Pressure wash deck, built in seats, privacy screens near bbq and colorbond fence. Staining of the deck (jarrah) and privacy screens (merbau). Both need a different stain to suit the wood. We like a natural look nothing too harsh. Some areas are weathered so may need a sand before to stain. To be completed by Friday 13/12/24. You’d need to bring your own equipment and materials.

Our church needs a wooden fence fixed, replacing 5 wide and 5 narrow fence palings (treated pine) standard 1.8m long. Plus we just need a chair leg fixed back onto an armchair in our foyer

I have a backyard deck that gets stained yearly. Need pressure wash and staining. Front door landing and backyard.

Wooden beam support on the porch has got some rot and it needs replacement. It's supporting the front part of the roof so roof will need to be supported while Beam is being replaced